Ase brake 2025 - Study guides, Class notes & Summaries

ASE Exam Questions & Answers 2024/2025 An engine's exhaust is white gray color. Which of the following is causing this condition? - ANSWERSCoolant burning in the combustion chamber An automatic transmission's fluid is pink and milky. Technician A says this is caused by engine overheating. Technician B says the transmission could have been overfilled and the fluid has become aerated. Who is correct? - ANSWERSNeither A or B A front wheel drive vehicle makes a clacking noise that occur...

ASE (Entry level technician prep) - Brakes A5 Exam Practice Questions and Answers (100% Pass) A5 Question 1 The brake pedal is low and spongy; all brake adjustments have been completed according to specifications. The cause of the problem could be: A) Binding pedal linkage. B)Dented brake line. C)Plugged compensating port. D)A weak hydraulic hose. - Answer️️ -Answer D is correct! Binding pedal linkage would cause a hard pedal and perhaps an effective brake system. This is also tru...

ASE P2 Practice Quiz with 100% Correct Answers Counterman A says "Mercon LV" transmission fluid is used in newer Ford and Mercury vehicles. Counterman B says "Dexron-VI" fluid is used in newer Chrysler vehicles. Who is right? - Answer️️ - Counterman A only Transmission fluid that is brown and has a burnt smell: - Answer️️ -Is badly oxidized and needs to be replaced; Can damage the transmission; Has probably been subjected to overheating "ATF+4" automatic transmission fluid ...

ASE BRAKES Exam #1 Practice Questions and Answers A drum is chattering on the brake lathe. This could be the result of: A. Failure to install the dampening belt. B. Cutting too slowly. C. Dull cutting blades. D. Cutting speed too fast. - Answer️️ -A A vehicle is equipped with a hydro-boost brake system has a hard pedal with little braking action. Which of the following could be the cause? A. Low brake fluid B. Air in the brake fluid C. Low power steering fluid D. An overtightene...

ASE S4 Brakes Exam Practice Questions and Answers The air system is maintained at what pressure? - Answer️️ -100 to 120 pounds per square inch. At what pressure does the low pressure switch activate? - Answer️️ -Below 60 pounds per square inch. A safety or pop off valve is usually installed in which reservoir? - Answer️️ -In the one closest to the compressor. Why is the Wet tank referred to as such? - Answer️️ -It is the one closest to the compressor and has the most wate...

ASE BRAKES Exam #4 Practice Questions and Answers (100% Correct) Four channel ABS sensors will have how many ABS wheel speed sensors? A. Two B. Four C. Six D. Eight - Answer️️ -B The metering valve: A. Limits front brake application until the rear brakes apply. B. Limits rear brake application until the front brakes apply. C. Limits front brake application based on vehicle height. D. Limits rear brake application based on vehicle height. - Answer️️ -A A wheel cylinder has b...

ASE B6 Test - Damage Analysis & Estimating Practice Questions and Answers What is the difference between a unitized frame and a uni-body? - Answer️️ -There is no difference. In a uni-body or unitized vehicle, the frame and body are incorporated into a single welded structure. Should exhaust damaged systems be welded and repaired, or replaced all together? - Answer️️ -Replaced. Exhaust gases contain poisonous carbon monoxide and leaks could create dangerous conditions for passenge...

ASE Diesel Engines test T2 practice test 1 Questions and Answers (100% Pass) Which of the following should be done after installing a new copper injector sleeve? A. Heat it B. Dress it C. Ream the seat D. Coat it with a looking compound - Answer️️ -C. Ream the seat (This reaming ensures there will be a good clean area for the injector to seal against) A diesel engine has oil in the radiator. Which of the following would be the cause? A. Cracked piston cooling nozzle B. Cracked o...

ASE B-5 Mechanical/Electrical Practice Exam Questions and Answers A vehicle is brought in with a bent subframe. Technician A says to section the subframe. Technician B says the subframe should not be repaired and must be replaced. Who is right? A, B, Both, or Neither - Answer️️ -Technician B only The subframe should never be sectioned, and should rarely, if ever, be worked. It is typically a bolt-on part that does not lend itself to traditional straightening methods. Vehicle manufact...

ASE A5 Brakes Exam Questions And Solutions(Well Elaborated)2024/2025 A spongy brake pedal may be caused by: a. ABS Diagnostic Trouble Code set b. Frozen caliper piston c. Defective metering valve. d. Air in hydraulic system - answers D. This question has the word EXCEPT. For this question, look for the choice that could NOT cause the described situation. Read the entire question carefully before choosing your answer. A vehicle has a very erratic brake pulling concern while applying t...