Camber - Study guides, Class notes & Summaries

Which of the following is true about control arm bushings? A: They are located between the frame and the control arm. B: Worn control arm bushings result wheel shimmy. C: They are tightened on while unloaded and the vehicle is raised in the air D: Both A or B - Answer-D: Both A or B Technician A says that leaf spring shackle swivels and allows the spring to flatten as the vehicle travels over bumps in the road. Technician B says that a single crack in the longest blade of a multi-leaf lea...

SOS Mechanic Certification- Suspension & Steering Questions and Answers 100% Pass Bleeding a power steering unit is generally done by turning the steering wheel left and right repeatedly After rounding a turn, the front wheels do not return to the straight ahead position in a normal way. What adjustment is most likely to be out of specifications? Caster "Toe" adjustment on front wheel drive vehicles is made by: changing he length of the steering linkage When performing a front-en...

Which of the following is the proper way to adjust the rack yoke bearing? A. Tighten to 75 ft lbs. B. Tighten to 5 inch lbs. C. Tighten and then back off the original equipment manufacturer's (OEM) specifications. D. Tighten to 0.002" end-play. - Answer-Tighten and then back off the originial equipment manufacturer's (OEM) specifications. Many OEMs will recommend that the technician tighten to a specification then back off a certain number of degrees. A customer says that the steering ...

A vehicle with a MacPherson strut suspension is damaged in a collision impact to the right front. An analysis with a frame/body measuring system shows the top of the strut tower was moved toward the vehicle centerline by 14mm. This damage would result in change to which of the following alignment angles? A. front wheel toe B. caster C. camber D. SAI - C. camber Moving the top of the strut directly inboard (toward the vehicle centerline) without moving it any other direction will affect ...

NIFE-AERO ELO's, Questions, & Equations Latest Update 100% Correct LESSON 1 - Basic Theory & Lift Production Lesson 1 DEFINE - Vector Quantity that represents magnitude and direction. Resultant vector may be divided into separate components DEFINE - Air Density Air particles within a given volume. DEFINE - Moment Created when a force is applied at some perpendicular distance from a rotation point STATE - Requirements for an airplane to be in equilibrium flight Sum of all force...

HEAVY TRUCK STEERING AND SUSPENSION MICHIGAN MECHANIC STUDY GUIDE WITH COMPLETE SOLUTIONS YOU HAVE REPLACED A POWER STEERING PUMP WHICH FAILED. WHAT SHOULD YOU DO BEFORE PUTTING THE TRUCK BACK INTO SERVICE? - Correct Answer ️️ -A. REPLACE THE HYDRAULIC LINES. B. REMOVE AIR WITH A PRESSURE BLEEDER. (NOT CORRECT AWNSER) C. FLUSH THE SYSTEM WITH CLEAN POWER STEERING FLUID. (POSSIBLE CORRECT AWNSER) D. ALL OF THE ABOVE. (NOT CORRECT AWNSER) IN THE TANDEM SETUP SHOWN BELOW, RUBBER BUSHI...

YOU HAVE REPLACED A POWER STEERING PUMP WHICH FAILED. WHAT SHOULD YOU DO BEFORE PUTTING THE TRUCK BACK INTO SERVICE? A. REPLACE THE HYDRAULIC LINES. B. REMOVE AIR WITH A PRESSURE BLEEDER. (NOT CORRECT AWNSER) C. FLUSH THE SYSTEM WITH CLEAN POWER STEERING FLUID. (POSSIBLE CORRECT AWNSER) D. ALL OF THE ABOVE. (NOT CORRECT AWNSER) IN THE TANDEM SETUP SHOWN BELOW, RUBBER BUSHINGS WOULD BE FOUND AT: A. POINT B. B. POINT C. C. POINT A. (CORRECT AWNSER) D. ALL OF THE ABOVE. (NOT CORRECT ...

ASE EXAM QUESTIONS & ANSWERS 2024/2025 Which of the following is true about control arm bushings? A: They are located between the frame and the control arm. B: Worn control arm bushings result wheel shimmy. C: They are tightened on while unloaded and the vehicle is raised in the air D: Both A or B - ANSWERSD: Both A or B Technician A says that leaf spring shackle swivels and allows the spring to flatten as the vehicle travels over bumps in the road. Technician B says that a single cr...

AFOQT Aviation Information Latest Update Graded A+ fixed-wing aircraft structure 1. Fuselage 2. Wings 3. Tail assembly or empennage 4. Landing gear 5. Powerplant 6. Flight instruments/controls and control surfaces fuselage body of an airplane. Contains the cockpit, the cabin, the cargo area if there is one, and attachment points for other major airplane components, such as wings, tail section, and landing gear. cockpit from which the pilots and the flight crew control the airc...

HEAVY TRUCK STEERING AND SUSPENSION MICHIGAN MECHANIC STUDY GUIDE WITH COMPLETE SOLUTIONS YOU HAVE REPLACED A POWER STEERING PUMP WHICH FAILED. WHAT SHOULD YOU DO BEFORE PUTTING THE TRUCK BACK INTO SERVICE? - Correct Answer ️️ -A. REPLACE THE HYDRAULIC LINES. B. REMOVE AIR WITH A PRESSURE BLEEDER. (NOT CORRECT AWNSER) C. FLUSH THE SYSTEM WITH CLEAN POWER STEERING FLUID. (POSSIBLE CORRECT AWNSER) D. ALL OF THE ABOVE. (NOT CORRECT AWNSER) IN THE TANDEM SETUP SHOWN BELOW, RUBBER BUSHI...