Ase brake exam 2025 - Study guides, Class notes & Summaries

ASE B6 Test - Damage Analysis & Estimating Exam Questions With Verified Answers What is the difference between a unitized frame and a uni-body? - answerThere is no difference. In a uni-body or unitized vehicle, the frame and body are incorporated into a single welded structure. Should exhaust damaged systems be welded and repaired, or replaced all together? - answerReplaced. Exhaust gases contain poisonous carbon monoxide and leaks could create dangerous conditions for passengers. The ...

ASE MLR EXAM PRACTICE QUESTIONS AND ANSWERS Tech observes that the brake fluid level is at the "Min" mark in the master cylinder reservoir. Tech A says that worn front pads could be the cause. Tech B says that a leak in the brake hydraulic system could be the cause. Who is right? (1) - Ans:-Both A and B (1) The tires of a vehicle are being rotated and balanced. Tech A says that the wheel weight retaining clips must be matched to the rim profile. Tech B says that the directional tires...

ASE Brakes Exam Practice Questions and Answers 1) The brake pedal feels soft after the master cylinder has been replaced. Technician A says that a leaking power booster could be the cause. Technician B says that air in the hydraulic system could be the cause. Who is right? - Ans:-B only Explanation: A leaking power brake booster will cause the brake pedal to be hard. Technician A's statement is false. Air in the hydraulic system may cause the pedal to be soft. Technician B's stateme...

ASE A5 Brakes Practice Test -Section 1- Hydraulic System DIagnosis and Repair Exam Questions and Answers A spongy brake pedal may be caused by: - Ans:-Air in the hydraulic system d - Air causes a gap in the hydraulic fluid flow because the fluid has to compress the air before it can apply the piston. This delay causes the spongy feel. The other choices do not affect this concern. This question is not like the others. It has the word EXCEPT. For this question, look for the choice that coul...

ASE exam study guide questions & answers 2024/2025 Spark plugs are being replaced on a v6 engine. Which of the following should be performed before removing the boot? - ANSWERSTwist the boot 1/2 a turn Technician A days that a positive crankcase ventilation (pvc) system reduces vehicle emissions. Tech B says that a pvc system helps increase crankcase pressure. Who is correct? - ANSWERSTech A Tech A says that secondary ignition wires should be inspected when replacing spark plugs. Tech...

ASE Prep - EBCS, ABS, TCS, & ESC Exam Practice Questions and Answers The wiring harness from the right front ABS wheel speed sensor to the harness connector is badly damaged from corrosion, exposing the wires. Technician A says to carefully clean the damaged section and wrap the damaged area with black tape. Technician B says a badly corroded harness should be replaced. Who is correct? A only B only Both A and B Neither A nor B - Ans:-B only A diagnostic trouble code (DTC) representing...

ASE B-5 Mechanical/Electrical Exam Questions and Answers A vehicle is brought in with a bent subframe. Technician A says to section the subframe. Technician B says the subframe should not be repaired and must be replaced. Who is right? A, B, Both, or Neither - Ans:-Technician B only The subframe should never be sectioned, and should rarely, if ever, be worked. It is typically a bolt-on part that does not lend itself to traditional straightening methods. Vehicle manufacturers recommend rep...

ASE PREP ASSOCIATE EXAM GUIDE SOLUTIONS Brake Pad Minimum Thickness Customer Pay Warranty CPO - Ans:-Customer Pay: 3mm Warranty: 4mm (3.9mm) CPO: 5 mm Brake bleed pressure setting (bar): - Ans:-2 bar max - Location of MSDS: - Ans:-Online CPO test drive (length and distance): - Ans:-20 uninterrupted minutes/ 5 continuous miles Caliper bleeding with 2 bleed screws - Ans:-Outer bleeder first, then inner - Is prescription eye wear valid eye protection in a bmw shop? - Ans:-no How do you ...

ASE Brakes A5 Test ( Exam 2 ) Practice Questions and Answers The brakes are dragging on a vehicle. this could be cause by a. overfilled master cylinder reservoir b. low vacuum to the boost c. bypassing master cylinder d. quick take-up valve stuck open - Answer️️ -A : overfilled master cylinder reservoir why : an overfilled master cylinder reservoir cylinder would not allow for fluid expansion. this would cause the brakes to self apply as the fluid expanded as result in brake drag ...

ASE Exam Questions & Answers 2024/2025 An engine's exhaust is white gray color. Which of the following is causing this condition? - ANSWERSCoolant burning in the combustion chamber An automatic transmission's fluid is pink and milky. Technician A says this is caused by engine overheating. Technician B says the transmission could have been overfilled and the fluid has become aerated. Who is correct? - ANSWERSNeither A or B A front wheel drive vehicle makes a clacking noise that occur...