Ase a6 exam - Study guides, Class notes & Summaries

OBD2 P C B U - ANSWER-Body Chassis Power U-Network VM - ANSWER-connected in parallel Ammeter - ANSWER-connected in series or can damage OBD2 First Digit - ANSWER-0-Universal 1-OEM 2nd digit system Short within component - ANSWER-resistance less than spec short to power - ANSWER-items operate unintentionally or not at all, due to worn wiring or such. If a component is shorted, resistance should be less than specified. short to ground - ANSWER-fuse will blow but if short...

ASE A6 Electrical/Electronic Systems Exam with 100% Correct Answers 2023

ASE A6 EXAM LATEST 2023-2024 ACTUAL EXAM QUESTIONS AND CORRECT ANSWERS WITH RATIONALES (VERIFIED ANSWERS) |AGRADE

Automotive A6 ASE Study Guide & Practice exam(50 questions and answers).

ASE A6 Electrical/Electronic Systems Practice Exam Questions and Answers An air bag system is being serviced, Technician A says to disconnect the yellow SRS connectors at the front of the vehicle. Technician B says to disconnect and isolate the negative battery cable. Who is right? A. Technician A only B. Technician B only C. Both A and B D. Neither A or B - Answer️️ -.B Which of these should be used when soldering electrician wiring connections? A. rosin core flux B. acid core...

All the lights in a brake light circuit illuminate except one. The MOST likely cause is: A. an open wire B. an open taillight switch C. a blown fuse D. a burned bulb D. a burned bulb If a tech reversed the leads of a digital voltmeter on a 12v circuit the readout would show: A. 0.00v B. -0.00v C. 12.00v D. -12.00v D. -12.00v The hazard and turn signal lights are inoperative. Tech A says that they share the same circuit. Tech B says the vehicle may have a faulty flasher. Who is corr...

ASE A6 Exam With 100% Correct Answers 2023

ASE A6 Test Prep (Electrical & Electronic Systems) Exam Questions And Answers Technician A only A technician connects one lead of a DMM (digital multimeter) to the positive (+) terminal of a battery and the other meter lead to the "B" terminal of the starter solenoid and then cranks the engine. During cranking, the voltmeter displays a reading of 878 mV. Technician A says this reading indicates the positive battery cable has very high resistance. Technician B says this reading indic...

ASE A6 Exam With 100% Correct Answers 2023

ASE A1 (Engine Repair) 180 Q&A Test answers fully explained for ideal study. Ase A2 Automatic Transmission/Transaxle (50) Q&A 2024. A3 – Manual Drive Train & Axles (40) Test Q&A 2024. A4 – Suspension & Steering (40) Exam Complete Q&A 2024. ASE Brakes A5 Test ( Exam Answered Summer 2024/25) ASE A6 Exam Answered Summer 2024 (Electrical & Electronic Systems) ASE Test Preparation - A7 Heating and Air Conditioning (Automobile Certification Series) ASE-A8 Engine performance/ASE Test Prepara...