Final Exam TFS UPDATED ACTUAL Exam Questions and CORRECT Answers
6 views 0 purchase
Course
TFS
Institution
TFS
Final Exam TFS UPDATED ACTUAL
Exam Questions and CORRECT Answers
According to NFPA, burning building collapse is the ________ leading cause of fireground
deaths.
a) First
b) Second
c) Third
d) Fourth - CORRECT ANSWER- d
What are the three factors that will likely contribute to an increa...
Final Exam TFS UPDATED ACTUAL
Exam Questions and CORRECT Answers
According to NFPA, burning building collapse is the ________ leading cause of fireground
deaths.
a) First
b) Second
c) Third
d) Fourth - CORRECT ANSWER✔✔- d
What are the three factors that will likely contribute to an increase in collapse of burning
buildings?
a) Older buildings that need to be maintained, abandon buildings, lightweight construction for
newer buildings.
b) Fire codes are out of date, Buildings are older, decorative finishings
c) Structural integrity of the building, Building material hazards, Fire code out of date.
d) none of the above - CORRECT ANSWER✔✔- a
True or False: Contents fire is as hazardous as a structural fire. - CORRECT ANSWER✔✔-
False:
A contents fire is not as hazardous as a structural fire. Once it is determined that fire is
consuming or affecting the structure itself, we must recognize that fire may now affect the
gravity resistance of a building and poses a greater potential for structural collapse.
What is the definition of a Dead Load?
a) The weight of the building and any part of the building that is permanently attached or
built in.
,b) Any load in the building that is not built in and may vary, including environmental loads.
c) are loads that are delivered over a short period of time. In a fire, building elements that
have supported one another for years are unsettled. The overturning of a heavy live load (e.g.
a big safe) or a Firefighter jumping on a roof may be enough of an impact load to cause
collapse. If parts of a building system begin to collapse, this will represent an impact load that
can result in further collapse.
d) are live loads that are applied slowly and are then not moved, for example a large heavy
safe. - CORRECT ANSWER✔✔- a
What is the definition of Live Load?
a) The weight of the building and any part of the building that is permanently attached or
built in.
b) Any load in the building that is not built in and may vary, including environmental loads.
c) are loads that are delivered over a short period of time. In a fire, building elements that
have supported one another for years are unsettled. The overturning of a heavy live load (e.g.
a big safe) or a Firefighter jumping on a roof may be enough of an impact load to cause
collapse. If parts of a building system begin to collapse, this will represent an impact load that
can result in further collapse.
d) are live loads that are applied slowly and are then not moved, for example a large heavy
safe. - CORRECT ANSWER✔✔- b
What is the definition of Impact Load?
a) The weight of the building and any part of the building that is permanently attached or
built in.
b) Any load in the building that is not built in and may vary, including environmental loads.
,c) are loads that are delivered over a short period of time. In a fire, building elements that
have supported one another for years are unsettled. The overturning of a heavy live load (e.g.
a big safe) or a Firefighter jumping on a roof may be enough of an impact load to cause
collapse. If parts of a building system begin to collapse, this will represent an impact load that
can result in further collapse.
d) are live loads that are applied slowly and are then not moved, for example a large heavy
safe. - CORRECT ANSWER✔✔- c
What is the definition of Static Load?
a) The weight of the building and any part of the building that is permanently attached or
built in.
b) Any load in the building that is not built in and may vary, including environmental loads.
c) are loads that are delivered over a short period of time. In a fire, building elements that
have supported one another for years are unsettled. The overturning of a heavy live load (e.g.
a big safe) or a Firefighter jumping on a roof may be enough of an impact load to cause
collapse. If parts of a building system begin to collapse, this will represent an impact load that
can result in further collapse.
d) are live loads that are applied slowly and are then not moved, for example a large heavy
safe. - CORRECT ANSWER✔✔- d
What is the definition of Repeated Loads?
a) are live loads that are applied intermittently. An example might be an industrial rolling
bridge crane that applies repeated loads to the columns as it passes over them.
b) is the force applied to a building or structural member by the wind. Firefighters operating
in or near buildings under construction must use extra caution, because the interconnection of
all building parts may not be complete, and temporary bracing may be inadequate.
, c) are heavy loads located at one point in a building over a small contact area. A beam resting
on a wall is a concentrated dead load. A safe is a concentrated live load.
d) Loads can be suspended by slender tensile members connected to beams or other
members. Although this technique can help to eliminate columns and the need for larger
compressive members to perform the same task, it can be hazardous for Firefighters. As in
lightweight - CORRECT ANSWER✔✔- a
What is the definition of Wind Loads?
a) are live loads that are applied intermittently. An example might be an industrial rolling
bridge crane that applies repeated loads to the columns as it passes over them.
b) is the force applied to a building or structural member by the wind. Firefighters operating
in or near buildings under construction must use extra caution, because the interconnection of
all building parts may not be complete, and temporary bracing may be inadequate.
c) are heavy loads located at one point in a building over a small contact area. A beam resting
on a wall is a concentrated dead load. A safe is a concentrated live load.
d) Loads can be suspended by slender tensile members connected to beams or other
members. Although this technique can help to eliminate columns and the need for larger
compressive members to perform the same task, it can be hazardous for Firefighters. As in
lightweight con - CORRECT ANSWER✔✔- b
What is the definition of Concentrated Loads?
a) are live loads that are applied intermittently. An example might be an industrial rolling
bridge crane that applies repeated loads to the columns as it passes over them.
b) is the force applied to a building or structural member by the wind. Firefighters operating
in or near buildings under construction must use extra caution, because the interconnection of
all building parts may not be complete, and temporary bracing may be inadequate.
The benefits of buying summaries with Stuvia:
Guaranteed quality through customer reviews
Stuvia customers have reviewed more than 700,000 summaries. This how you know that you are buying the best documents.
Quick and easy check-out
You can quickly pay through credit card or Stuvia-credit for the summaries. There is no membership needed.
Focus on what matters
Your fellow students write the study notes themselves, which is why the documents are always reliable and up-to-date. This ensures you quickly get to the core!
Frequently asked questions
What do I get when I buy this document?
You get a PDF, available immediately after your purchase. The purchased document is accessible anytime, anywhere and indefinitely through your profile.
Satisfaction guarantee: how does it work?
Our satisfaction guarantee ensures that you always find a study document that suits you well. You fill out a form, and our customer service team takes care of the rest.
Who am I buying these notes from?
Stuvia is a marketplace, so you are not buying this document from us, but from seller MGRADES. Stuvia facilitates payment to the seller.
Will I be stuck with a subscription?
No, you only buy these notes for $9.99. You're not tied to anything after your purchase.
