Type c fire extinguisher - Study guides, Class notes & Summaries

NFPA 10 Exam 99 Questions with Verified Answers (SI) - CORRECT ANSWER International System of Units 1 in=. mm - CORRECT ANSWER 25.4 Approved - CORRECT ANSWER Acceptable to the authority having jurisdiction. (AHJ) - CORRECT ANSWER Authority Having Jurisdiction O rganization, office or individual responsible for enforcing requirements of a code or standard, or for approving equipment, materials, an installation or procedure. Shall - CORRECT ANSWER Indicates a mandatory requirement....

NFPA 10 Exam 71 Questions with Verified Answers When should wheeled fire extinguishers be considered? - CORRECT ANSWER • High hazard areas are present. • Limited available personnel are present. Requiring: High agent flow rate, Increased agent stream range, increased agent capacity NON-DOT low pressure fire extinguisher cylinders that pass a hydrostatic test shall have the following recorded on a label: - CORRECT ANSWER • Month and year test was performed (perforated) • Test pre...

F80 Exam Questions and Answers Graded A After what date was the F-24 certificate of Fitness not recognized. July 31, 2014 How often must this certificate be renewed? Every 3 years In what types of buildings and occupancies are coordinators of fire safety and alarm systems in homeless shelter required? Homeless shelters, one-way voice communication systems, or occupied for more tha n fifteen persons for a period of more than 30 days. What is the certificate of occupancy? Determines the number ...

Test Bank for Patient Care in Radiography 10th Edition by Ehrlich d. Rescue, Alarm, Contain, Evacuate. ANS: D REF: p. 124 OBJ: 2 13. The acronym RACE is a helpful way to remember: a. the basic principles of body mechanics. b. the steps for using a fire extinguisher. c. the steps to follow in the event of a fire. d. the steps involved in cleaning up a hazardous spill. ANS: C REF: p. 124 OBJ: 2 14. What type(s) of musculoskeletal disorder(s) is/are more likely to occu...

Clean Agent ANS: - Electrically non-conducting, volatile, or gaseous fire extinguishant that does not leave a residue upon evaporation. High-Pressure Cylinder ANS: - containing nitrogen, compressed air, carbon dioxide, or other gases at a pressure higher than 500 psi (3447 kPa) at 70°F (21°C). Low-Pressure Cylinder ANS: - containing fire- extinguishing agent (medium), nitrogen, compressed air, or other compressed gases at a service pressure of 500 psi (3447 kPa) or lower at 70°...

NFPA 10 Questions and Answers Graded A+ Examples of extinguishers for protecting class B hazards are A. aqueous film forming foam B. Carbon dioxide c.Wet chemical d. A and B only E. all the above D. A and B only A church is classified as what type of hazard? A. light(low) hazard B.Ordinary(moderate) hazard C. Extra(high) hazard D. Special(unusual) hazard A. Light hazard A parking garage is classified as what type of hazard? A. light(low) hazard B.Ordinary(moderate) hazar...

IFSTA Chapter 6 & 7 Exam | Questions and Verified Answers| 100% Correct Q: When an extinguishing agent is determined to be safe and effective for use on combustible metals, it will: A) include the test results on the face plate B) include application instructions on the faceplate C) be given a numerical rating based upon the amount of fire it can extinguish D) be a different color than extinguishers designed to extinguish other classes of fire Answer: B) include application instruc...

TFM02 FINAL EXAM PRACTICE QUESTIONS 2024. Clean Agent - correct answer Electrically non-conducting, volatile, or gaseous fire extinguishant that does not leave a residue upon evaporation. High-Pressure Cylinder - correct answer containing nitrogen, compressed air, carbon dioxide, or other gases at a pressure higher than 500 psi (3447 kPa) at 70°F (21°C). Low-Pressure Cylinder - correct answer containing fire- extinguishing agent (medium), nitrogen, compressed air, or other compressed ga...

BCTC Industrial Maintenance Technology AMTEC (NOCTI Mechatronic) Review Questions And Answers All Verified If you inhale phenol fumes what would happen to you? - ANS Trouble breathing A _________ fire extinguisher should be used on an electrical fire. - ANS Class C What does OSHA stand for? - ANS Occupational Safety & Health Administration This type of drawing represents a three-dimensional object using several two-dimensional views of the object. - ANS Orthographic ...

Gloves - correct answer-When setting up lighting, a worker should wear Type C fire extinguisher - correct answer-Fire extinguisher used for electrical equipment because the extinguishing agent is non-conductive Type A fire extinguisher - correct answer-Fire extinguisher used for ordinary combustible substances like wood, paper, or cloth. Type B fire extinguisher - correct answer-Fire extinguisher used for flammable substances such as grease, oil, or gas fires. Type D fire extinguishe...