One yoke - Study guides, Class notes & Summaries

What is the result if the neutral wire becomes open on a multiwire circuit having unequal loads? Select one: a. The load of higher resistance would overheat and probably be damaged. b. The load of lesser resistance would overheat and probably be damaged. c. No effect until one load is turned off or opens. d. No effect. The load of higher resistance would overheat and probably be damaged. Refer to Figure 128.202. ___ volts are applied across the water heater element. S...

Maine Journeyman Plumbing Exam Questions and Answers 100% Solved When Plumbing code conflicts with mechanical code, which shall prevail? - answerPlumbing code It is the duty of whom to notify the AHJ of work ready for inspection? - answerThe person doing the work What is AHJ? - answerAuthority Having Jurisdiction How much notice must you give the AHJ prior to inspection? - answer24 Hours hot water for public use lavatories shall be limited to what temp: A) 105 B) 120 C)115 D)110 - an...

Electrical Journeyman Test 2020 With Complete Questions And Answers Rated A+ A fixed light will be allowed to be 30 amp provided the socket is rated ____ duty. a. Light b. Medium c. Heavy d. Extra Heavy c. Heavy From the Skilled Trades Act, Section 7 "Except as otherwise provided in this article or in subsection (3), and individual other than an individual who is licensed under this article and ______________ working under the direction of a holder of an electrical contractors licence, ...

Scuba Diving Final Exam (Padi Open Water Diver) 2024 What will the buoyancy of an object be (positive, neutral, or negative) if it displaces an amount of water: a. more than its own weight? b. less than its own weight? c. equal to its own weight? - CORRECT ANSWER-a. positive b. negative c. neutral How does the buoyancy of an object differ in fresh water compared to salt water. - CORRECT ANSWER-Because salt water weighs more than fresh water, it causes more buoyancy (more upward f...

This is a bizarre question. It never mentions that the financial savings should be reported at the annual level. However, that's a reasonable assumption to make. $7,500 * 12 months = $90, 000. A shoe manufacturing firm learned through a Lean Six Sigma project their boot soles could be made of a different material requiring two less steps in the process. Removal of these two steps yielded a monthly cost savings of $7,500. Therefore the reported financial savings for this LSS project were: A) $...

Who is responsible for Damage Control onboard? - correct answer Everyone Who is also known as the Damage control officer? - correct answer Cheng Where do all reports for casualties go? - correct answer Pilot House Where are all SCBAs located onboard? - correct answer AUX3, Combat Pway, Co's Pway, Forw...

1. One of the best ways to stress the importance of inspections upon building owners is through : - A follow - up visit . 2. In an inspection report , fire inspectors are generally concerned with presenting the facts and evidence to prove a point , draw a conclusion , or : - Justify a recommendation 3. Which statement regarding inspection forms / checklists is true ? - They are very useful for inspecting common items and / or complex processes . 4. During an inspection of a bui...

ASE A3 Questions and Answers 100% Pass Noise: In gear, clutch disengaged (pedal to floor) - Answer ️️ -Pilot bushing or bearing Noise: Neutral, clutch disengaged (pedal to floor) - Answer ️️ -Release bearing Noise: Neutral, clutch engaged (pedal up) - Answer ️️ -Input shaft bearing Binding U-Joint will damage?? - Answer ️️ -Extension housing bushing and seal What is used to check the clearance between the shift fork and the synchronizer sleeve? - Answer ️️ -A feeler gua...

Iec year 1 final exam LATEST 2023/2024 GRADED A NEW VERSION The Code reference that specifies the type of disconnecting means (circuit breaker for example) that can be used on a multiwire branch circuit that feeds devices mounted on the same yoke [a stack switch or a duplex receptacle for example] is ___. Note: Select N/A (not applicable) if there is not an NEC® requirement. Select one: a. Article 100 b. 240.15(B)(1

Which of the following are among the MOST important elements of the lean production philosophy? a. Quality inspections and a standardized product line b. Fully automated assembly lines and a large supplier base c. Large inventories and quality inspections d. Waste reduction and continuous improvement - Waste reduction and continuous improvement Which of the following is NOT one of the Seven Wastes? a. Excess inventory b. Environmental waste c. Waiting d. Scrap and rework - Environment...