Ice residential oil heat - Study guides, Class notes & Summaries

In regard to the characteristics of an oil flame, oil-burner flame-detection systems make use of the: - ANSWER-production of heat or visible light. On a new oil furnace installation, the oil pump pressure is found to be 50 psi. Which, if any, of the following actions should be taken? - ANSWER-increase the pump pressure On a "no heat" service call for an oil-fired furnace, what is the main safety precaution that the technician must take before attempting to fire the oil furnace? - ANSWER-...

NATE ICE RESIDENTIAL OIL HEAT EXAM QUESTIONS WITH CORRECT ANSWERS GRADED A+ 100% 2024

What date was the sale of CFC's & HCFC's restricted to technicians certified in refrigerant recovery? - Correct answer-November 14, 1994 Section 608 of the Federal Clean Air Act requires technicians to what? - Correct answer-Recover all refrigerants. The objective of the Clean Air Act is to protect what? - Correct answer-The earth's stratosphere. HFC's - Correct answer-HydroFlouroCarbon's CFC's - Correct answer-ChloroFluoroCarbon's ODP - Correct answer-Ozone Depletion Potential Which in...

FDNYC G60 Practice Exam Answers Correct Updated Summer 22-23. All torch operators, an oxigen-fuel torch using any amount of oxigen and flamable gas and fire guards must have a current The Certificate of Fitness holder if the torch operator for jewelry manufacture involves A Certificate of Fitness Holder must keep his or her certificate The easiest way to extinguish a fire caused by a leak is to Permits issued by the FDNY are required to conduct the following hot work: Fo...

NATE ICE Residential Oil Heat. Top Questions & Answers. 100% Accurate. VERIFIED. In regard to the characteristics of an oil flame, oil-burner flame-detection systems make use of the: - -production of heat or visible light. On a new oil furnace installation, the oil pump pressure is found to be 50 psi. Which, if any, of the following actions should be taken? - -increase the pump pressure On a "no heat" service call for an oil-fired furnace, what is the main safety precaution that the...

On a "no heat" service call for an oil-fired furnace, what is the main safety precaution that the technician must take before attempting to fire the oil furnace? - ANSWER-check the combustion chamber for liquid oil On start-up of an oil unit, the technician's smoke test shows the unit to have a #8 smoke. Which of the following is the correct action that should be taken? - ANSWER-increase primary air The primary reason for using a barometric draft control on an oil furnace is to maintain...

NATE Heat Pump Exam Questions With Correct Answers Updated 2024/2025 (VERIFIED A+) The water that results from a defrost cycle of an air to air heat pump(runoff) must? -Ans Drain off and away from the outdoor coil. Why must the runoff be drained off and away from the outdoor coil? -AnsExcessive ice can build up on the bottom of the coil and can reduce capacity. What is the component that reduces sound transmission and prevents water leaks of a package heat pump installed on a roof? -Ans Cur...

HVAC NATE Heat Pump Exam Questions With Correct Answers Updated 2024/2025 (Graded A+) What is the primary purpose of using flux when soldering copper or brass parts? -Ans Prevent Oxidation The water that results from a defrost cycle of an air to air heat pump(runoff) must? -Ans Drain off and away from the outdoor coil. Why must the runoff be drained off and away from the outdoor coil? -AnsExcessive ice can build up on the bottom of the coil and can reduce capacity. What is the component th...

if the firing rate is 0.85 gallons per hour on an oil nozzle and the applied pressure is 100 psi, how many gallons of oil will be used per hour? correct answers0.85 in an oil burner, atomization of the oil and spray pattern are mainly determined by the? correct answersnozzle a correct statement regarding the fan/limit controller is that is senses the? correct answerssupply air temp in the furnace failure at the cad cell to view the oil-burner flame properly because of soot buildup or mi...

HVAC NATE Heat Pump Exam Questions and Answers 100% Pass On an R-22 system, line diameters and lengths are typically specified for a vapor pressure drop that does not exceed what? -Answer-6-7PSI or 6F What is the primary purpose of using flux when soldering copper or brass parts? - Answer-Prevent Oxidation The water that results from a defrost cycle of an air to air heat pump(runoff) must? - Answer-Drain off and away from the outdoor coil. Why must the runoff be drained off and away from...