Hvacr unit 70 - Study guides, Class notes & Summaries

HVACR UNIT 70 TEST WITH QUESTIONS AND ANSWERS...

NATE Air Conditioning and Heat Pump Exam Questions and Answers Updated (GRADED A+) The maximum sensible cooling capacity of a heat pump should be within ______% of the calculated sensible heat gain of a structure with a large heating load. - ANSWER- +25% The combined output of a heatpump and its auxiliary heat should not exceed the calculated heat loss of a home by more than ____%. - ANSWER-15% What amount of auxiliary electronic heat is needed when the output of a heat pump on a design d...

EPA SECTION 608 CORE (2021-2022 revision) A disposable cylinder should be reduced to what pressure before scrapping? a. 0 psig b. 20 psig c. 50 psig d. 80 psig A major system repair is being performed on a R-22 appliance. What CANNOT be done to recharge the appliance? a. Add R-22 after the repair is complete. b. Retrofit the unit to R-407C. c. Use recovered or recycled R-22 from the same owner. d. Top off the unit with R-410a. A refillable cylinder must not be filled above what ...

NATE Exam: Core Essentials Study Guide for HVACR Technicians | Comprehensive Prep The ability to utilize all types of communication skills is ____ to the HVACR technician. a. not as important as "hands-on" technical skills b. somewhat important c. unimportant d. very important - d (very important) It is important to be ____ in filling out service orders so that office staff, other technicians, and customers will know what work you completed on the job. a. clear b. complete c. ...

Which of the following factors affects a customers level of comfort? All of the above A cooling load calculation estimates the sensible heat gain of the structure. The cooling-only system should be within _____% of this calculated value. +15% The maximum sensible cooling capacity of a heat pump should be within ______% of the calculated sensible heat gain of a structure with a large heating load. +25% The combined output of a heatpump and its auxiliary heat should not exc...

NATE Exam: Air Conditioning and Heat Pumps, questions with complete top solutions Which of the following factors affects a customer's level of comfort? a. Air movement b. Humidity c. Temperature d. All of the above d (All of the above: air movement, humidity, temperature) A cooling load calculation estimates the sensible heat gain of a structure. The maximum sensible capacity of a cooling-only system should be within ____% of this calculated value. a. ±10% b. +10% c. +15% ...

NATE Exam: Core Essentials, questions and answers. Verified d (very important) The ability to utilize all types of communication skills is ____ to the HVACR technician. a. not as important as "hands-on" technical skills b. somewhat important c. unimportant d. very important d (all of the above: clear, complete, concise) It is important to be ____ in filling out service orders so that office staff, other technicians, and customers will know what work you completed on the job. ...

EPA SECTION 608 CORE (2022 revision) What does ozone in the stratosphere above the earth consist of? a. Molecules containing 2 oxygen atoms. b. Molecules containing 3 oxygen atoms. c. Molecules containing 4 oxygen atoms. d. Molecules containing 5 oxygen atoms Which of the following refrigerants has the lowest global warming potential? a. R-134a b. R-407C c. R-410A d. R-600a Which of the following gases is used as the baseline measurement for global warming potential? a. Ammo...

On an R-22 system, line diameters and lengths are typically specified for a vapor pressure drop that does not exceed what? - ANSWER-6-7PSI or 6F What is the primary purpose of using flux when soldering copper or brass parts? - ANSWER-Prevent Oxidation The water that results from a defrost cycle of an air to air heat pump(runoff) must? - ANSWER-Drain off and away from the outdoor coil. Why must the runoff be drained off and away from the outdoor coil? - ANSWER-Excessive ice can build up ...

Which of the following factors affects a customer's level of comfort? a. Air movement b. Humidity c. Temperature d. All of the above - ANSWER-d (All of the above: air movement, humidity, temperature) A cooling load calculation estimates the sensible heat gain of a structure. The maximum sensible capacity of a cooling-only system should be within ____% of this calculated value. a. ±10% b. +10% c. +15% d. +30% - ANSWER-c (+15%) The maximum sensible cooling capacity of a heat pu...