Cbspd exam study set - Study guides, Class notes & Summaries

CBSPD EXAM STUDY SET LATEST UPDATE...

CBSPD Problem set study Exam Questions and Correct Answers Guaranteed Success 2024/2025 Verified that the sterilization conditions within the load were adequate to kill a known number of bacterial spores. - correct answer Biological monitoring Biological monitoring - correct answer - is the only way to measure the lethality of a sterilization process. Geobacillus stearothermophilus - correct answer The spore that is most resistant to steam sterilization is Indicator tape - correct an...

CBSPD EXAM STUDY GUIDE Questions With 100% Correct Answers 2024 (A+ Graded Verified) You have received a loaner instrument, w the IFU's. The IFU's state that the instrument is to be sterilized at 273 degrees , for 4 minutes. You usually run 270 degrees for 4 minutes. What should you do? - ANSWER Call the manufacturer to find out what you can do The set assembly count sheet calls for a Senns, dull. All you have is a Senns, sharp. What kind of behavior is displayed if you put the sharp Se...

CBSPD TECH CERTIFICATION EXAM STUDY GUIDE QUESTIONS AND ANSWERS Simultaneous wrapping means to wrap an instrument set with - Answer-Single non-woven wrapper, double-ply, bonded at the edges Clamps used for hemostasis are also designed to - Answer-Minimize damage to tissue An instrument tray for a laparotomy procedure must include a(n) - Answer-Abdominal retractor Inspection and verification of adequate cleaning is difficult with instruments - Answer-With lumens Cotton gauze cannot...

CBSPD Tech Certification Exam Study Guide A broken glass suction bottle is returned to Decontamination. Which of the following should the technician do? - Place it in an appropriate rigid container Safety Data Sheets (SDS) provide health and safety hazard and risk information on which of the following? - Chemical Which of the following generally describes the correct sequence for traffic workflow in areas in which medical devices are processed? - Decontamination, Assembly, Packaging,...

CBSPD Focused on Chapter 8 Sterilization Study Guide Exam Questions with Approved Solutions 2024/2025 Basin sets must be prepared for sterilization with: A. Basins placed in opposite directions B. Basins separated by at least 1/2 inch C. A nonabsorbent material between each basin D. An absorbent material between each basin - correct answer D. An absorbent material between each basin Which of the following is NOT one of the basic principles of packaging? A. The material must be accep...

If the steam pressure is too low for the set temperature - ANSWER-Superheating can occur Wet steam can cause - ANSWER-Wet packs AAMI recommends that the temperature in the sterilization area be: - ANSWER-68-73 degrees AAMI recommends that the humidity is the sterilization area be - ANSWER-30%-60% The recommended ventilation in the sterilization are is—— air exchanges per hour under positive pressure - ANSWER-10 AAMI recommends that the temperature in the sterilizer access area...

CBSPD Tech Certification Exam Study Guide 2024 with 100% Complete Solutions A broken glass suction bottle is returned to Decontamination. Which of the following should the technician do? -Answer-Place it in an appropriate rigid container Safety Data Sheets (SDS) provide health and safety hazard and risk information on which of the following? -Answer-Chemical Which of the following generally describes the correct sequence for traffic workflow in areas in which medical devices are processed...

CBSPD Tech Certification Exam Study Guide With Correct Answers A broken glass suction bottle is returned to Decontamination. Which of the following should the technician do? - Answer ️️ -Place it in an appropriate rigid container Safety Data Sheets (SDS) provide health and safety hazard and risk information on which of the following? - Answer ️️ -Chemical Which of the following generally describes the correct sequence for traffic workflow in areas in which medical devices are proc...

You have received a loaner instrument, w the IFU's. The IFU's state that the instrument is to be sterilized at 273 degrees , for 4 minutes. You usually run 270 degrees for 4 minutes. What should you do? - ANSWER Call the manufacturer to find out what you can do The set assembly count sheet calls for a Senns, dull. All you have is a Senns, sharp. What kind of behavior is displayed if you put the sharp Senns in and put it in the sterilizer? - ANSWER unethical Why not use sodium hypoc...