An up flow furnace - Study guides, Class notes & Summaries

Boilermaker NCCR Test Questions And Answers Boilermaker NCCR Test 1 ft 3-3/4 in + 2 ft 1-1/16 in +5 ft 10- 7/8 in = - ANS 9 ft 3-11/16 in A 1-inch plate is to be cut. Why should an acetylene gerulator on a cutting rig not be adjusted over 15 PSI? - ANS Acetylene is unstable above this pressure A big control valve is pulled who is responsible for the rigging? - ANS Crane operator and rigger A boiler maker must have all of the following wh...

MN Boiler License Questions With Complete Solutions Graded A+ a question an answer what are the conditions necessary for good combustion? a) low sulfur content b) Thermal, thermocoupler, tubular c) turbulence, temperature, time 3T's c) turbulence, temperature, time 3T's why is secondary air necessary in hand fired boilers? a) Necessary to burn the combustible gases b) if primary air should fail c) used only if sulfur content is high a) Necessary to burn the combustible gases when ...

MD Stationary Engineer Practice Questions and Answers Latest Updated 2024/2025 (100% Correct) Gases of Combustion that cool on Contact with the boiler heating Surface before combushion is completed Cause a(n) _________ - Answer Formation of soot and smoke In the event of a flame failure, the programmer will______ - Answer Secure the fuel, purge the firebox, and then shut down Boil the water must be conditioned to prevent ______ (3 Answers) - Answer Formation of scale, oxygen pitting, carry...

NATE Gas Heating Exam Verified Questions and answers 2023 Latest Update Since 1992, the United States Department of Energy has required that all furnaces sold and installed from that date on must have an AFUE of no less than: A: 70% B: 75% C: 78% D: 80% - correct answer C: 78% Many pre-1992 furnaces have efficiencies around . A: 10% B: 40% C: 60% D: 80% - correct answer C: 60% Today, furnaces with AFUE ratings greater than are available. A: 85% B: 90% C: 100% D: 110% - correct ...

What is the first thing a tech should do when arriving at a no combustion call? - Answer- Ask how many times the customer reset the unit. What is the best long term solution for preventing a clogged nozzle? - Answer- -Remove any underground storage tanks. -Install a quality oil filter. -Cut the suction line 10" above the tank outlet to prevent sludge. Hot water and steam valves are interchangeable. - Answer- False When in the presence of a flame, a cad cell normally reads.. - Answe...

The oil-fired, forced-warm-air furnace has two main systems which are those? correct answers1. producing system 2. heat distribution system What is a heat producing system on oil heat? correct answersconsist in the oil burner, fuel supply components, combustion chamber, and heat exchanger. What is heat distribution system compose oil heat? correct answersis compose of the blower, which moves the air through the ductwork and relates components on oil heat the thermostat will cause the ...

G2 Gas Technician Module 19 Revised Questions Rated A If the venting on a high efficiency furnace runs through unheated spaces, what must be done? Insulate piping to prevent Condensation and freezing What is condensate drain piping used for? Dispose Liquid waste Once the furnace is installed, what are the gas technician's responsibilities to the user? To instruct the the user in the safe and correct operation of all appliances and equipment - clause 4.3.2 Which furnace type is the most popu...

. If the draft through an appliance is too high, what adjustment should be made. - • Adjust the barometric damper to more of a closed position . One advantage to lightweight combustion chambers is they: - cool down quickly . What is the temperature range of combustion with a new burner and boiler or furnace combination - •d. 450° to 500°F . When testing an ignition transformer using the arc test method , the arc should be a minimum of: - 1/4" 101. The function of the barometric dra...

HVAC Oil burner Exam Questions and Answers All Correct An up flow furnace - Answer-Has the return air at the bottom Of the six regular grades of fuel oil,The grade most commonly used in residential and light commercial heating systems is No. - Answer-2 How much heat is produced when 2 gallons of No. 2 fuel oil is burned? - Answer-280,000 What could be the cause of a high steak temperature - Answer-Too much air How would you prove a furnace was stopped up with soot in the heat exc...

Gas Fitter 2 Practice Test Exam 2024 Questions and Answers. A room heater installed in either a sleeping area or public area shall be: A. direct vent only B. equipped with a regulator C. equipped with a fan D. equipped with an on / off switch on the wall - correct answer -B What type of vent must be used when the vent of a wall furnace will be concealed in a partition wall? A. B vent B. L vent C. BH vent D. BW vent - correct answer -D Single wall vent connectors: A. may pass through ...