Pumper test 2 - Study guides, Class notes & Summaries

Fire protection engineers have established _____ PSI as a minimum required residual pressure when computing the available water for flow test results. - 20psi The most common gallonage rating for horizontal shaft pumps in use today are _____ - _____ GPM. - 500 - 1500 gpm A fire pump serving a standpipe system should be tested ______ - weekly A fire department pumper can effectively supply around ______ feet in a high rise building depending on hydrant pressure and other factors. - 450 feet...

1. What is the atmospheric pressure at sea level? A. 3.1417 psi (22 kPa) B. 7.69 psi (53 kPa) C. 14.7 psi (101 kPa) D. 21.3 psi (147 kPa)answer: C NFPA 1002: 10.2.1, 10.2.1(A) Page: 324 2. What liquid is used to measure vacuum due to its density? A. 2-propanol B. Glycerol C. Water D. Mercuryanswer: D NFPA 1002: 10.2.1, 10.2.1(A) Page: 324 3. A fire pumper in good condition should be able to develop a vacuum equal to about: A. 17 inches (391.4 mm Hg). B. 22 inches (507.8 mm Hg...

Pumper Test Correctly Answered 2024. water distribution systems OS&Y valves use what to control the valve. - correct answer threaded system principles of pressure say that pressure on an amount of water act on a surface in what way - correct answer perpendicular to the surface it acts on fog nozzles aerate what kinda foam - correct answer class A 2 ways to find discharge pressure with sprinklers - correct answer pre incident plan and dept connection plate how much energy is needed t...

Pumper CDC Written Exam 2024. A fire apparatus should be started with all electrical switches in the OFF position in order to: - correct answer Start the engine without a load. During an inspection of your fire apparatus, you should ensure that the foam level is: - correct answer Full Match the location of each fire apparatus inspection item to the name that applies - correct answer saddle tanks - 6 winch - 7 main hose bed - 2 automatic snow chains - 4 intake strainers - 5 ladders - ...

Fire Inspector 2 Exam Questions Fire protection engineers have established _____ PSI as a minimum required residual pressure when computing the available water for flow test results. - 20psi The most common gallonage rating for horizontal shaft pumps in use today are _____ - _____ GPM. - 500 - 1500 gpm A fire pump serving a standpipe system should be tested ______ - weekly A fire department pumper can effectively supply around ______ feet in a high rise building depending on hydra...

DO - Pumper Study Guide Test 2024. How should you wash a new truck? How long? - correct answer With cold water for first 6 months How often should you change tires? - correct answer 7 Years What is the minimum requirement for pump/tank capability on pumpers? - correct answer 750 gpm / 300 gallons What is a sequencer? - correct answer Load management system that turns off lights in order What is a Monitor? - correct answer Will shut down less important electrical to avoid failure ...

Texas Commission on Fire Protection (TCFP) Driver/ Operator Test Questions and Answers 2024/2025 | 100% Verified. In 1720 what was the piece of equipment to replace the bucket brigade? Hand Pump Which NFPA standard required new fire apparatus to be designed so that all members riding on the fire apparatus would be provided a seated area inside an enclosed cab? NFPA 1500 What was the first gasoline powered fire apparatus to discharge water by using a large soda acid extinguisher? Chemical ...

what is a ALARM NOTIFICATION APPLIANCE - Answer-A fire alarm system component, such as a bell, horn, speaker, light, text display or vibration device that issues an audible, tactile, and/or visual alert. what is a AUTOMATIC BALL DRIP - - Answer-An automatic drain valve horizontally installed at the low point in the piping between the lower check valve and the Fire Department connection of automatic sprinkler systems. Water pressure from a Fire Department pumper automatically closes this val...

Pumper CCRE Questions with complete solution 2023/2024Identify TWO correct statements about conducting a daily inspection of a fire apparatus. - correct answer 1. Confirm that the foam tank level is full. 2. Operate the pump drive control. The rescue tool supply system equivalent of a junction box is called: - correct answer A manifold. Compares meter readings with actual pitot tube readings: - correct answer Gauge and flowmeter test Checks the overall condition of the engine: - co...

TCFP Driver/ Operator Test 100% Solved 2024 Hand Pump - Answer- In 1720 what was the piece of equipment to replace the bucket brigade? NFPA 1500 - Answer- Which NFPA standard required new fire apparatus to be designed so that all members riding on the fire apparatus would be provided a seated area inside an enclosed cab? Chemical Wagon - Answer- What was the first gasoline powered fire apparatus to discharge water by using a large soda acid extinguisher? Triple-combustion pumper - Answer...