Pump apparatus d - Study guides, Class notes & Summaries

FAE (ILLINOIS) Exam Questions And Answers (Updated And Verified) The Pressure at the base of a column of water is based on: a) The Weight of the water b) The atmospheric pressure c) The diameter of the column d) The temperature of the water - answera)The Weight of the water The change from pressure mode to volume mode should be made: a) When the pump Must deliver more than 25% of its rated capacity b) When the pump must deliver more than 50% of its rated capacity c) When the pump must ...

FAE (ILLINOIS) Exam Questions And Answers (Updated And Verified) The Pressure at the base of a column of water is based on: a) The Weight of the water b) The atmospheric pressure c) The diameter of the column d) The temperature of the water - answera)The Weight of the water The change from pressure mode to volume mode should be made: a) When the pump Must deliver more than 25% of its rated capacity b) When the pump must deliver more than 50% of its rated capacity c) When the pump must ...

In 1720 what was the piece of equipment to replace the bucket brigade? Hand Pump Which NFPA standard required new fire apparatus to be designed so that all members riding on the fire apparatus would be provided a seated area inside an enclosed cab? NFPA 1500 What was the first gasoline powered fire apparatus to discharge water by using a large soda acid extinguisher? Chemical Wagon The real breakthrough for today's modern fire apparatus came with the introduction of the _______________...

FAE (ILLINOIS) Exam Questions And Answers (Updated And Verified) The Pressure at the base of a column of water is based on: a) The Weight of the water b) The atmospheric pressure c) The diameter of the column d) The temperature of the water - answera)The Weight of the water The change from pressure mode to volume mode should be made: a) When the pump Must deliver more than 25% of its rated capacity b) When the pump must deliver more than 50% of its rated capacity c) When the pump must ...

From what location is the procedure for making the pump operational performed for most apparatus? A: Cab of the vehicle. B: Location varies depending on the incident. C: Outside the vehicle near the driver's door. D: Anywhere driver/operator is located with remote controls. correct answers A: Cab of the vehicle. Which of the following is used to prevent the pump from overheating during fire attack if water is not flowing for an extended period of time? A: Rotary Valve. B: Piston Ge...

Which term means areas where underdeveloped land with vegetative fuels is mixed with human-made structures? a. greenbelt b. rural-urban intermix c. wild-urban interface d. rural development zone - c. wild-urban interface Which type of map details changes in elevation? a. topographic b. cartometric c. planometric d. orthographic - a. topographic The majority of ground cover fires are extinguished with which item? a. backfire b. aircraft c. backpack pump d. CAFS - c. backpack pump ...

IFSTA Pumping and Aerial D/O 3rd edition Ch.1What is the main purpose of a fire dept pumper? - correct answer To provide adequate water pressure for effective fire streams Minimum pump capacity of pumper? - correct answer 750 gpm and water capacity of at least 300 gallons. Pump capacities larger than 750 gpm increase in increments of 250 gpm with most municipal fire departments operating pumpers of 2,000 gpm or less. Initial attack fire apparatus - correct answer A fire apparatus that's ...

Pumper End of Course Questions and Answers 100% Solved A priming device works by: A. centripetal force B. creating a partial vacuum C. centrifugal force D. creating compression within a rotating chamber ️️CREATING a partial VACUUM The purpose of the gauge and flowmeter test is to: A. ensure that the fire apparatus is running at the same speed it was rated for when it was new B. check the overall condition of the engine C. check that the given discharge information is accurate wh...

IFSTA Pumping and Aerial D/O 3rd edition Ch.1What is the main purpose of a fire dept pumper? - correct answer To provide adequate water pressure for effective fire streams Minimum pump capacity of pumper? - correct answer 750 gpm and water capacity of at least 300 gallons. Pump capacities larger than 750 gpm increase in increments of 250 gpm with most municipal fire departments operating pumpers of 2,000 gpm or less. Initial attack fire apparatus - correct answer A fire apparatus that's ...

State of Florida Driver/Operator Exam | Questions and Correct Answers | Latest Update 2024/2025 | Graded A+ Ground reservoirs are man-made impoundments that have the same characteristics of a pond or small lake. They are most commonly found at: A. Commericial Properties B. Industrial Properties C. Municipal water treatment facilities D. All of the above - Answer -D Pump piping on fire apparatus must be able to withstand hydrostatic test pressures of A. 100 psi B. 250 psiC. 500 psi ...