Electrocution hazards - Study guides, Class notes & Summaries

OSHA - Occupational Safety & Health Administration Guardrail heights for top and middle rails - 39in -45in What does a GFCI do? - Protects you from shock Detect difference in current How far must the ladder extend over the top of what you're climbing to? - 3 feet What is the force in pounds that the top rail of a guardrail must withstand? - 200 lbs What are the safe work practice to protect yourself from electrocution hazards? - de-energizer electric tools that are in good repair Using ...

OSHA 10 Hour Certification Questions with Verified Answers OSHA Occupational Safety & Health Administration Guardrail heights for top and middle rails 39in -45in What does a GFCI do? Protects you from shock Detect difference in current How far must the ladder extend over the top of what you're climbing to? 3 feet What is the force in pounds that the top rail of a guardrail must withstand? 200 lbs What are the safe work practice to protect yourself from electrocution hazards...

OSHA 10 Test Answers With Verified Solutions The mission of the Occupational Safety and Health Administration (OSHA) is: To send every worker home whole and healthy every day Electricity travels in closed circuits, and its normal route is through a conductor. Electric shock occurs when: Your body becomes part of the circuit Workers need to take which of the following common-sense steps to protect themselves from falls through skylights and roof and floor openings? -- Never sit on,...

Name some PPE that can prevent electrocution colon correct answers-Rubber insulating gloves -hoods -sleeves A fan connected to a 120 V electrical system by an extension cord was worn through ana exposed the bare, energy conductor, which made contact with the ladder, the path to ground including the workers body, resulting in death. Which of the following contributed to the electrocution? correct answers-Use of known faulty equipment -lack of grounding -short in a receptacle Wet or d...

CHST STUDY GUIDE LATEST UPDATE GRADED A+ Which of the following is NOT a significant factor in determining the impact of an electrocution event on a worker? The amount of electrically resistant material present in work boots and work gloves A Hearing Conservation Program is required under OSHA regulation 29 CFR 1926.52 (Occupational Noise Exposure) when workers are exposed to noise levels in excess of an eight- hour time-weighted average of _________. 90 decibels (dB) Per 29 CFR...

Air-Supplied Respirator - ANSWER-A breathing device that consists of a full face mask with a hose that connects to a freestanding compressed air cylinder. Air-supplied respirators are used in confined spaces to maintain exposure levels. Alloying Element - ANSWER-An element that is intentionally added to a metal in order to change its properties. Manganese is a common alloying element in steel. American National Standards Insitute - ANSWER-ANSI. A private, non-profit organization that admin...

Employers covered by OSHA's standards must display an "It's the Law!" poster. What does this poster address? health and safety information What's OSHA's mission? To prevent injuries, protect the health of America's workers, to save lives Which groups do NOT come under OSHA's coverage? self-employed, public workers who are employed by state agencies Where there is no specific OSHA standard, employers must comply with the OSH Acts's: General Duty Clause The...

H.S.E. QUESTIONNAIRE QUESTIONS & ANSWERS 2024 UPDATE H.S.E. QUESTIONNAIRE & ANSWERS SAFETY STANDARS: HELMET Z-89.1 (ANSI) 1981 SAFETY GLASS Z-87+ (ANSI) 1968 SAFETY HARNESS Z-359.1 (ANSI) & 10.4 ANSI SAFETY SHOES Z-47.1 (ANSI) 1967 RESPIRATOR Z-88.2 (ANSI) 1992 SAFETY ON SCAFFOLDING A-10.4 (ANSI) Safety is the control of hazards to obtain any acceptable level of risk, to perform a job properly and avoid incident and accidents at worksite…!!! 1.) WHAT IS METHOD OF STATEMENT? ...

NIOSH is an acronym for which if the following? correct answers B. The National Institute for Occupational Health and Safety OSHA's Focus Four training topics include caught-in or -between, struck-by, electrocution, and: correct answers C. Falls In most elevated work locations, at what height does OSHA generally require fall protection on a construction site? correct answers C. 6ft A fall hazard is anything that could cause you to _______, which may result in a fall. correct answers A....

OSHA 10 Questions and Answers 100% Pass Reduction of workplace fatalities and injuries after the Inception of OSHA Down 62% fatalities, down 40% injuries OSHA's mission To ensure a safe and healthy workplace for every working man and woman in the nation General duty Clause require from employees? Comply with occupational safety and health standards Required to be posted in a conspicuous location OSHA 300a year summary of workplace injuries and illnesses Report of a workpla...