Brake pedal - Study guides, Class notes & Summaries

TEXAS CDL AIR BRAKERS,TX CDL#3- AIR BRAKERS- SECTION 5,CDL AIR BRAKERS 2 NEWEST 2024 LATEST EXAM 2024 ACTUAL QUESTIONS AND CORRECT DETAILED ANSWERS|GRADED A+ The brake system that applies and releases the brakes when the driver uses the brake pedal is the _________brake system - ANSWER-service Before driving a truck or bus with dual air brake system the pressure in each system should be at least _______psi - ANSWER-100psi Your truck or bus has a dual air brake system if a low air ...

AIR BRAKES TEST QUESTIONS AND ANSWERS ALREADY PASSED 1) Why must air tanks be drained? a) For pre trip inspection purposes b) To check for leaks c) To release oil and water buildup d) To activate the low air pressure alarm c) To release oil and water buildup 2) What is a supply pressure gauge used for? a) To check tire pressure b) To check tank pressure c) To activate the low pressure alarm d) To check for leaks b) To check tank pressure 4) What are spring brakes? a) Hydraulic...

ASE A5 PRACTICE TEST EXAM 2024 WITH 100% CORRECT ANSWERS 1. On a car with disc/drum brakes, the front brakes grab quickly when light pedal pressure is applied. This problem could be caused by a bad: A. proportioning valve B. pressure safety switch C. metering valve D. residual check valve - correct answer C 2. The driver of a vehicle with power disc/drum brakes says that the brake pedal moves slowly to the floor while maintaining pedal pressure at a stoplight. What could cause thi...

Why is motorcycling considered serious fun? (Ans- Serious because there is risk involved; fun because riding a motorcycling is fun (iv) Learning to ride and ride well requires what physical traits? (Ans- Fitness, strength, coordination (iv) What do Rider Coaches do? (Ans- Guide students, answer questions, observe progress (iv) What are the four requirements for successful course completion? (Ans- 1-complete all course assignments; 2-attend all sessions; 3-pass a knowledge ...

SOS Brake & Braking System Questions and Answers Graded A+ In a single anchor bendix drum type rear brake the secondary lining is longer than the primary Compared to the secondary shoe lining areas of drum brakes, the primary shoe lining area is: smaller and goes toward the front of the car During a brake overhaul, you notice that the brake fluid seems to be very dirty and dark in color. What should you do? flush the system before the new parts are installed In order to bleed t...

What are the MHU-83-series munitions handling/loading lift truck designed to do - ️️Lift, transport, and load/unload munitions and stores weighing up to 7,000 pounds Describe how the parking brake is set on the MHU-83 - ️️Parking brakes are controlled by a locking valve located to the left of the steering wheel. With the locking valve in the closed position, the parking brake is set by depressing the service brake pedal What is the lifting capacity of the MJ-1B - ️️3,000 pounds...

in your vehicle, what should you adjust before you start your engine? adjust the seat and all rear-view mirrors what are the equipment requirements for windshields and side windows? windshields: must be safety glass and may not be covered or treated with any material that makes the windshield reflective or non-transparent. must be free of any stickers not required by law. side & rear windows: may not be composed of, covered by, or treated with any material which has a highly reflecti...

What can cause dragging in the brakes? Swollen master cylinder cups or compensation port covered. What can cause reduced brake pedal free play? Improper adjustment of stoplight and cruise control switch. What can cause dragging in one front caliper? Quick take-up valve not allowing fluid movement. What can cause excessive pedal effort? Swollen master cylinder cups or corroded master cylinder. What can cause the brake pedal to slowly move downward? Brake fluid leaking past master cyli...

ASE (Entry level technician prep) - Brakes A5 | Questions and Correct Answers | Latest Update 2024/2025 A5 Question 1 The brake pedal is low and spongy; all brake adjustments have been completed according to specifications. The cause of the problem could be: A) Binding pedal linkage. B)Dented brake line. C)Plugged compensating port.D)A weak hydraulic hose. - Answer -Answer D is correct! Binding pedal linkage would cause a hard pedal and perhaps an effective brake system. This is also...

Brake test questions and answers Graded A+ 1) Why must air tanks be drained? a) For pre trip inspection purposes b) To check for leaks c) To release oil and water buildup d) To activate the low air pressure alarm c) To release oil and water buildup 2) What is a supply pressure gauge used for? a) To check tire pressure b) To check tank pressure c) To activate the low pressure alarm d) To check for leaks b) To check tank pressure 4) What are spring brakes? a) Hydraulic brakes...