Steam pressure gauge Study guides, Class notes & Summaries

3rd Class Stationary Steam Engineer License Prep - Complete Solutions (Answered) __________ steam turbines allow condensate to be reclaimed for use in the system Condensing With water at a temperature of 212°f, 1 bhp is equivalent to the evaporation of 34.5 lb of water every ________ hour(s) 1 In a closed feedwater heater, the _________ Steam and water do not mix Sensible heat is heat that ______ changes the temperature of a substance but not its state When performing a hydrostatic test on a ...

Stationary Steam Engineer License Prep {3 rd Class} Pre Test Questions And Answers _________ are necessary for complete combustion - ANSWER : time, temperature, mixture, and atomization If the steam pressure gauge indicates 200 PSIG, the absolute pressure is______ - ANSWER : 214.7 A boiler is operating at 400 PSI, and the safety valve opens at 410 PSI and closes at 398 PSI. The blowdown is______psi - ANSWER : 12 An oil cooler is commonly used with a(n) ________ when operating ...

MN Boiler License Exam Questions and Answers, Latest Update 2024/2025. what are the conditions necessary for good combustion? a) low sulfur content b) Thermal, thermocoupler, tubular c) turbulence, temperature, time 3T's - answerc) turbulence, temperature, time 3T's why is secondary air necessary in hand fired boilers? a) Necessary to burn the combustible gases b) if primary air should fail c) used only if sulfur content is high - answera) Necessary to burn the combustible gases when p...

NYC HIGH PRESSURE STEAM EXAM QUESTIONS AND ANSWERS LATEST UPDATED 2024/2025 (GRADED) The maximum blow down for a safety valve on a forced flow steam generator or high temperature water boiler shall be of what percent of the set pressure? - Answer - 10%. HP Code: 14-9.12 3 Who oversees the code for any plumbing installations? - Answer - The NYC Plumbing Code NYC Mech: 1002.1 4 When will anchorage or guides be inspected? - Answer - Annually. NYC Mech: 1210.3.1.2 5 How many brass washout plu...

Ohio boiler licensing exam questions with complete answers Which type of heat transfer takes place by actual physical contact, from molecule to molecule, without displacing the molecules? Conduction When designing a boiler, special consideration must be given to heat transmision by? Radiation, conduction, and convection What parts make up the heating surface in a scotch marine firetube boiler? The flue and the tubes Which type of boiler is the most econimical to build? Firetube...

High pressure steam test Study Guide Boiler License Questions & Answers Verified 800 psi safety valve, at what pressure does it lift? - CORRECT ANSWER-824 3% Gauge reads 175psi 45' below where it is connected to the boiler, what is its true reading? - CORRECT ANSWER-155.5. 45 X 0.433 = 19.50psi 175 - 19.50 = 155.5 How often does a welder who works on pressure tanks need to be requalified? - CORRECT ANSWER-1 year What is the compression or crushing strength of a steel plate? - CORRECT...

A low Pressure steam boiler has a MAWP of _____ psi CORRECT ANSWER-15 The higher the steam pressure, the higher the ___ of the water in the boiler. CORRECT ANSWER-boiling point ___ is the amount of energy equal to the evaporation of 34.5 lb of water/hr from and at a feedwater temp of 212F. CORRECT ANSWER-boiler horsepower When a steam boiler is operating at 100 pounds per square inch gauge pressure (psig), the temp of the water and steam will be approx. ___F. CORRECT ANSWER-338 A hor...

3rd Class Stationary Steam Engineer License Prep Exam 2024 Questions and Answers. ____ are necessary for complete combustion - Answer<>time, temperature, mixture, and atomization if the steam pressure gauge indicates 200 PSIG, the absolute pressure is______ - Answer<>214.7 a boiler is operating at 400 PSI, and the safety valve opens at 410 PSI and closes at 398 PSI. The blowdown is______psi - Answer<>12 an oil cooler is commonly used with a(n) ________ when operating in ...

1 The maximum blow down for a safety valve on a forced flow steam generator or high temperature water boiler shall be of what percent of the set pressure? - correct answer 10%. HP Code: 14-9.12 3 Who oversees the code for any plumbing installations? - correct answer The NYC Plumbing Code NYC Mech: 1002.1 4 When will anchorage or guides be inspected? - correct answer Annually. NYC Mech: 1210.3.1.2 5 How many brass washout plugs does a miniature boiler have? - correct answer Not less than...

3rd class stationary ste am engineer license prep questions with 100% verified answers _________ are necessary for complete combustion -Correct Answer-time, temperature, mixture, and atomization if the steam pressure gauge indicates 200 PSIG, the absolute pressure is______ -Correct Answer-214.7 a boiler is operating at 400 PSI, and the safety valve opens at 410 PSI and closes at 398 PSI. The blowdown is______psi -Correct Answer-12 an oil cooler is commonly used with a(n) ________ when...