Brake hydraulic - Study guides, Class notes & Summaries

AIR BRAKES TEST QUESTIONS AND ANSWERS ALREADY PASSED 1) Why must air tanks be drained? a) For pre trip inspection purposes b) To check for leaks c) To release oil and water buildup d) To activate the low air pressure alarm c) To release oil and water buildup 2) What is a supply pressure gauge used for? a) To check tire pressure b) To check tank pressure c) To activate the low pressure alarm d) To check for leaks b) To check tank pressure 4) What are spring brakes? a) Hydraulic...

Driving Commercial Vehicles. ICBC Questions and Answers Graded A+ Chapter 1: What kinds of vehicles require the driver to have an air brake endorsed drivers licence in order to operate them. Any vehicle with air-over-hydraulic brakes. Endorsement code: 15 Chapter 1: Which driver licence classes allow you to operate a school bus? Class 1 Class 2 Class 4 (unrestricted)/(restricted) Class 5 (Passenger vehicles used as school buses with seating capacity of not more than 10 includ...

ASE A5 Brakes Exam Questions and Correct Answers (Complete Solution) A hydro-boost brake system has reduced braking performance. Technician A says to check the power steering system. Technician B says to check the vacuum check valve. Who is correct? TECH A is correct. The power steering pump produces pressure for the Hydro-Boost unit. A vehicle with power assisted brakes has a hard brake pedal. Which of the following is LEAST likely to cause this condition? A. Master cylinder. B. V...

Most 1995 & newer vehicles use which of the following types of wheels bearings on non-drive wheel? Sealed non-serviceable to test a vacuum power brake booster in the vehicle, you should pump the brake pedal at least 4 times, hold the brake pedal depressed, and start the engine. the brake pedal should: drop slightly and remain firm You are installing a set of brake shoe linings that are not the same length. Traditionally, the primary shoe lining is: Smaller and goes towards the f...

he parking or emergency brake on a heavy vehicle can only be held in position by something that cannot leak away, like: a. Fluid pressure b. Spring pressure c. Air pressure d. Any of the above b. Spring pressure A straight truck or bus air brake system should not leak at a rate of more than __ psi per minute with the engine off and the brake released. a. 1 b. 2 c. 3 d. 4 c. 3 Your vehicle has dual air brake system. If low air pressure warning comes on for the secondar...

AMT: Airframe Oral & Practical Exam Guide Questions and Answers Rated A+ What is the purpose of an aircraft's hydraulic system? The hydraulic system is used to power flight control surfaces, landing gear, and brakes with fluid pressure. How do you identify a faulty alternator in an aircraft? A faulty alternator can be identified by a low or fluctuating voltage reading on the electrical system's indicator. What material is commonly used for aircraft skin, and why? Aluminum is...

GSM Test Study Guide Questions & Answers 2024/2025 Who is creddited with inventing the jet engine? - ANSWERSHero Define an open cycle. - ANSWERSAll working fluid passes through the engine only once. How is a GTE classified? - ANSWERSCompressor, combustion, or shaft design What are the two types of compressors? - ANSWERSAxial and Centrifugal What are the 3 types of shaft design? - ANSWERSSingle, split, or twin spool LM2500 rated at? (hp) - ANSWERS20,000 brake horsepower LM2...

Most 1995 & newer vehicles use which of the following types of wheels bearings on non-drive wheel? Sealed non-serviceable to test a vacuum power brake booster in the vehicle, you should pump the brake pedal at least 4 times, hold the brake pedal depressed, and start the engine. the brake pedal should: drop slightly and remain firm You are installing a set of brake shoe linings that are not the same length. Traditionally, the primary shoe lining is: Smaller and goes towards the f...

ASE A5 PRACTICE EXAM 2024 WITH 100% CORRECT ANSWERS A vehicle with ABS anti-lock brakes has an audible clicking noise when it is first started. The noise goes away after a few seconds. Technician A says this is one of the hydraulic valves in the hydraulic valve assembly sticking. Technician B says this is a normal condition. Who is correct? - correct answer TECH B is correct. The ABS system runs a system check when the key is first turned to the ON position. The valves sometimes make a clic...

Driving is the right given to all teenagers in America - Answer False Teen vehicle fatalities in the last decade surpassed the death toll of the Vietnam War - Answer True Alcohol can be a serious challenge for all age groups. In the 1997 study... - Answer A Graduated licensing is a concept that is sweeping the United States. - Answer True Young people have a real sense of the realities of death and do not see themselves as invincible. - Answer False Which is not req...