Vor frequency mhz Study guides, Class notes & Summaries

TACAN A/A uses what channels to avoid ground interference? correct answer: Odd, Even, X, Y When are zip ties allowed to be used on cable bundles? correct answer: Never High resistance in a thermocouple will cause what to the reading? correct answer: High temp What does a blinking green light mean on 708? correct answer: Battery is charging, steady green= battery fully charged with external power connected. What is the UHF frequency range? correct answer: 300 to 3000 MHz What ...

NTC Reviewer 1 Latest Update Graded A+ Folder of an aircraft pilot license Minimum requirement to qualify for RROC pilot examination 2182 kHz International Maritime Distress and Calling Frequency for Radio Telephony 121.5 MHz International Aeronautical Emergency Frequency 243.0 MHz NATO Combined Distress and Emergency Frequency 300-3000 MHz Ultra High Frequency (UHF) 3-30 MHz High Frequency (HF) DUDFMF Priority of Traffic Distress Serious and /or imminent danger, requiring immediate assis...

What are the basic components of a radio communication system? - A microphone, transmitter, transmitting and receiving antennas, receiver, and speaker What frequency range is used by most modern voice communications systems? - VHF band 118.o to 137.975 MHz What does the term ADF stand for - Auxiliary direction finder What is the function of VOR equipment? - navegation Name the components of a typical airborne VOR system - a receiver , antenna,frequency selector and visual display indicato...

The purpose of mode S is: - for data linking, ATC surveillance and reduced R/T communications and use by TCAS II. If a radar beam, at a frequency of 10.000 MHz, is radiated from a parabolic dish of diameter 15 cm, the azimuth target discrimination angle is: - 14° In a primary radar system: - all radio frequency energy is produced by the radar located at the radar site. A pilot wishes to obtain the magnetic bearing of his aircraft from a VDF station. Which of the following terms would he ...

062 – RADIO NAVIGATION. What airborne equipment, if any, is required to be fitted in order that a VDF let-down may be flown? A – none B – VOR C – VHF radio D – VOR/DME Ref: all Ans: C 11133. The maximum theoretical range at which an aircraft at FL80 can obtain bearings from a ground VDF facility sited 325 FT above MSL is: A – 107 NM B – 158 NM C – 134 NM D – 114 NM Ref: all Ans: C 11148. Which of the following is an advantage of Ground/DF (VDF) let-down? A –...

Part 107 applies to: A) Civil and public small UAS operations B) Civil small UAS operations C) Public UAS operations B) Civil small UAS operations A small UA causes an accident and your crew member loses consciousness. When do you report the accident? A) No accidents need to be reported. B) When requested by the UA owner. C) Within 10 days of the accident. C) Within 10 days of the accident What increases the load factor on a fixed wing airplane? A) Power off stall B) Level tur...

062 – RADIO NAVIGATION. What airborne equipment, if any, is required to be fitted in order that a VDF let-down may be flown? A – none B – VOR C – VHF radio D – VOR/DME Ref: all Ans: C 11133. The maximum theoretical range at which an aircraft at FL80 can obtain bearings from a ground VDF facility sited 325 FT above MSL is: A – 107 NM B – 158 NM C – 134 NM D – 114 NM Ref: all Ans: C 11148. Which of the following is an advantage of Ground/DF (VDF) let-down? A –...

062 – RADIO NAVIGATION. What airborne equipment, if any, is required to be fitted in order that a VDF let-down may be flown? A – none B – VOR C – VHF radio D – VOR/DME Ref: all Ans: C 11133. The maximum theoretical range at which an aircraft at FL80 can obtain bearings from a ground VDF facility sited 325 FT above MSL is: A – 107 NM B – 158 NM C – 134 NM D – 114 NM Ref: all Ans: C 11148. Which of the following is an advantage of Ground/DF (VDF) let-down? A –...

Gleim Private Pilot FAA Knowledge Test Guide Gleim Private Pilot FAA Knowledge Test Guide What is one purpose of wing flaps? To enable the pilot to make steeper approaches to a landing without increasing the airspeed. One of the main functions of flaps during approach and landing is to: Increase the angle of descent without increasing the airspeed. What is the purpose of the rudder on an airplane? To control yaw. Which is not a primary flight control surface? A. Flaps B. Stabilat...

Instrument Oral Exam Questions - Answered, Latest Version 2023/2024 What information will ATC provide when they a request a hold at a fix where the holding pattern is not charted? a) Direction of holding from the fix (N, NE, E, SE, S, SW, S, NW) b) Holding fix (may be omitted if previously transmitted in clearance limit) c) Radial, course, bearing, airway or route on which the aircraft is to hold d) Leg length in miles if DME or RNAV is to be used (specified in minutes on pilot request or if c...