Running rigging - Study guides, Class notes & Summaries

Starboard Tack - ️️When the wind hits the right side of the boat and the boom is on the left, often has right of way Apparent Wind - ️️The combination of true wind and boat speed wind Boom - ️️The spar at the bottom of the mainsail Hull - ️️The body of the boat Keel - ️️The weighted fin at the bottom of the boat Bow - ️️The front of the boat Stern - ️️The back of the boat Cockpit - ️️The space where the helmsman sits Rudder - ️️The fin used for steeri...

Standing Rigging - ️️Lines, wires, or rods which are more or less fixed in position while the boat is under sail, in contrast to running rigging, which move and change fairly often Keel - ️️Heavy, fixed appendage on the bottom of the hull that not only provides the sideways resistance, but also the vertical stability needed to counter the force of the wind on the sails that would otherwise push the boat sideways Hull - ️️Watertight floating body of the boat that gives it form a...

Abeam - ANSWERThe location of anything beyond either side of the boat at right angles to the centerline. Accidental Jibe - ANSWERAn unexpected jibe when sailing downwind and the wind catches the back side of the mainsasil, possible causing the helmsman to lose control of the boat. Aft - ANSWERThe direction toward the stern Ahead - ANSWERThe location of anything forward of the bow. Astern - ANSWERThe location of anything aft of the stern Battens - ANSWERStiffening pieces placed hor...

Hull → The body of the boat Keel → The weighted fin at the bottom of the boat Bow → The front of the boat Stern → The back of the boat Cockpit → The space where the helmsman sits Rudder → The fin used for steering Tiller → The lever used to steer a small boad Cabin 2 0 2 4 /2025 | © copyright | This work may not be copied for profit gain Excel! 1 | P a g e | G r a d e A + | 2 0 24 / 2 0 2 5 → The enclosed space bellow deck Stanchions → Amidships support for ...

If load is undetermined who is to find out if load weight does not exceed crane rating at radius at which the load is to be lifted - ANSWER Person responsible for lift Where should climbing instructions be kept - ANSWER ON Site All climbing operations shall be performed under the supervision of - ANSWER Qualified person When cranes are erected, load limiting devices shall be tested for proper setting and operation - ANSWER Before crane is placed in service Hooks shall be equipped with lat...

When determining the "gross load" the best method is: - Get an accurate load weight and add the rigging By order of strength which is correct - Basket, Vertical, Choker Primary purpose for a roster sheave or auxiliary boom point sheave is to: - Separate the hoist line When the number of layers of rope on a drum increase the : - Allowable line pull decreases What is the minimum allowable distance from the crane and power lines under 50kV? - 10' Eccentric main boom tip reeving casues - tw...

Which of the following OSHA regulations, governing suspended personnel platforms? ~~> OSHA 1926.1431 According to ASME B30.3, the prohibited zone for power lines that are 60 kV is. ~~> 15 ft The OSHA construction standards for rigging equipment is? ~~> 1926.251 According to ASME B30.3 what is the minimum pitch diameter for a load block sheaves? ~~> Not less than 15 times rope diameter According to OSHA, a periodic inspection is? ~~> Monthly to annually Pe...

Which of the following OSHA regulations, governing suspended personnel platforms? - Answer-OSHA 1926.1431 According to ASME B30.3, the prohibited zone for power lines that are 60 kV is. - Answer-15 ft The OSHA construction standards for rigging equipment is? - Answer-1926.251 According to ASME B30.3 what is the minimum pitch diameter for a load block sheaves? - Answer-Not less than 15 times rope diameter According to OSHA, a periodic inspection is? - Answer-Monthly to annually Per...

OECP Exam Questions With 100% Correct Answers 2024/2025 (GRADED) The shaded area on a load chart indicates _______? A structural chart 3. The minimum distance to a power line of unknown voltage is ? 50' 4. When hoisting personnel and have known voltage, can you use Table A and get closer than 20'? Never! 5. What is the minimum tale swing clearance requirement 2' 6. What kind of rigger is required for A/D? Qualified Rigger 7. Signal training is now required in the construction...

Signal Person Qualifications (OSHA) 1926.1428 Hoisting Personnel (OSHA) 1926.1431 Authority to Stop (OSHA) 1926.1418 Powerline Safety (OSHA) 1926.1407 thru 1926.1411 Scope (OSHA) 1926.1400 Inspections (OSHA) 1926.1412 Tower Cranes (OSHA) 1926.1435 Wire Rope Inspections (OSHA) 1926.1413 Mobile Cranes (ASME) B30.5 Slings (ASME) B30.9 Hooks (ASME) B30.10 Jack's (ASME) B30.1 Personnel lifting systems (ASME) B30.23 Tower Cranes (ASME) B30.3 Rigging Hardware (ASME) B30.26...