Cwb 1 exam 2025 - Study guides, Class notes & Summaries

CWB Level II Exam 2024/2025 (100%Verified Answers) Latest Update. What is the term used to describe the following condition of lost corrosion resistance? "When certain stainless steels are heated between 500-850° C, carbides form at the grain boundaries and cause a local depletion of chromium." (A) Oxidization (B) Increased toughness (C) Solution heat treatment (D) Sensitization - Correct Answer-(D) Sensitization Note: Also known as "carbide precipitation" -- Chromium binds to carbi...

CWB 1 Exam (2024/2025) (Verified Answers). 1. Which is not a recommended method for surface cleaning of a part for liquid penetrant examination? a) Cleaning with organic solvents. b) Blasting with shot or dull sand. c) Cleaning with de-greasers. d) Use of de-scaling solutions. e) Ultrasonic cleaning methods. - Correct answer-b) Blasting with shot or dull sand. 2. Which of the following weld defects is most likely to be missed by radiography in a weld: a) Undercutting. b) Porosity. c)...

CWB 1 Exam (2024/2025) (Verified Answers). 1. Which is not a recommended method for surface cleaning of a part for liquid penetrant examination? a) Cleaning with organic solvents. b) Blasting with shot or dull sand. c) Cleaning with de-greasers. d) Use of de-scaling solutions. e) Ultrasonic cleaning methods. - Correct answer-b) Blasting with shot or dull sand. 2. Which of the following weld defects is most likely to be missed by radiography in a weld: a) Undercutting. b) Porosity. c)...

CWB Module 16 rev 1 exam | Questions and Correct Solutions 2024/2025 | Graded A+ To ensure that calipers are accurate you would a) use a vernier b) calibrate them c) always take a reading to three decimal places - Answer -b) calibrate them A high quality measuring instrument. . a) should not be calibrated unless something goes wrong b) should be calibrated by the operator every time it is used c) should be calibrated regularly as specified in a formal calibration program - Answer -c)...

CWB 1 Exam (2024/2025) (Verified Answers). 1. Which is not a recommended method for surface cleaning of a part for liquid penetrant examination? a) Cleaning with organic solvents. b) Blasting with shot or dull sand. c) Cleaning with de-greasers. d) Use of de-scaling solutions. e) Ultrasonic cleaning methods. - Correct answer-b) Blasting with shot or dull sand. 2. Which of the following weld defects is most likely to be missed by radiography in a weld: a) Undercutting. b) Porosity. c)...

CWB 1 exam | Questions and Correct Answers Latest Update 2024/2025 | Graded A+ 1. Which is not a recommended method for surface cleaning of a part for liquid penetrant examination? a) Cleaning with organic solvents. b) Blasting with shot or dull sand. c) Cleaning with de-greasers. d) Use of de-scaling solutions. e) Ultrasonic cleaning methods. - Answer -b) Blasting with shot or dull sand. 2. Which of the following weld defects is most likely to be missed by radiography in a weld: a)...

CWB 1 exam | Questions and Correct Solutions | Latest Update 2024/2025 | Graded A+ 1. Which is not a recommended method for surface cleaning of a part for liquid penetrant examination? a) Cleaning with organic solvents. b) Blasting with shot or dull sand. c) Cleaning with de-greasers. d) Use of de-scaling solutions. e) Ultrasonic cleaning methods. - Answer -b) Blasting with shot or dull sand. 2. Which of the following weld defects is most likely to be missed by radiography in a weld:...

CWB exam | Questions and Correct Solutions Latest Update 2024/2025 | Graded A+ 1.To measure the strength of a welded joint what mechanical test would you prescribe? a) A transverse weld tension test b) A charpy test. c) A CTOD test. d) An all weld metal tension test. e) A side bend test. - Answer -a) A transverse weld tension test 2. Select the cutting process that would provide the narrowest heat affected zone when cutting 12.5 mm (0.5 in) thick carbon steel. a) Oxy-acetylene cuttin...