Ase brake 2024 - Study guides, Class notes & Summaries

ASE A5 PRACTICE EXAM 2024 WITH 100% CORRECT ANSWERS A vehicle with ABS anti-lock brakes has an audible clicking noise when it is first started. The noise goes away after a few seconds. Technician A says this is one of the hydraulic valves in the hydraulic valve assembly sticking. Technician B says this is a normal condition. Who is correct? - correct answer TECH B is correct. The ABS system runs a system check when the key is first turned to the ON position. The valves sometimes make a clic...

ASE A5 – Brakes Test | Questions and Correct Answers | Latest Update 2024/2025 On a car with disc/drum brakes, the front brakes grab quickly when light pedal pressure is applied. This problem could be caused by a bad: A. Proportioning valve B. Pressure safety switch C. Metering valve D. Residual check valve - Answer -The correct answer is C. The metering valve delays the flow of brake fluid to the front calipers until the pressure in the system rises to a point where the wheel cylind...

ASE Prep Exam Questions & Answers 2024/2025 A vehicle is brought in with a bent subframe. Technician A says to section the subframe. Technician B says the subframe should not be repaired and must be replaced. Who is right? A, B, Both, or Neither - ANSWERSTechnician B only The subframe should never be sectioned, and should rarely, if ever, be worked. It is typically a bolt-on part that does not lend itself to traditional straightening methods. Vehicle manufacturers recommend replaceme...

ASE A5 Practice Test (Brakes) | Questions and Correct Answers | Latest Update 2024/2025 A spongy brake pedal may be caused by: a. ABS Diagnostic Trouble Code set b. Frozen caliper piston c. Defective metering valve. d. Air in hydraulic system - Answer -D This question is not like the others. It has the word EXCEPT. For this question, look for the choice that could NOT cause the described situation. Read the entire question carefully before choosing your answer. A vehicle has a very er...

MLR ASE Test Questions & Answers 2024/2025 Both A and B - ANSWERSTechnician observes that the brake fluid level is at the "Min" mark in the master cylinder reservoir. Tech A says that worn front pads could be the cause. Tech B says that a leak in the brake hydraulic system could be the cause. Who is right? A only - ANSWERSThe tires of a vehicle are being rotated and balanced. Tech A says that the wheel weight retaining clips must be matched to the rim profile. Tech B says that directio...

ASE: A5 BRAKES EXAM 2024 WITH 100% CORRECT ANSWERS A drum is chattering on the brake lathe. This could be the result of: - correct answer Failure to install the dampening belt A vehicle equipped with a hydro-boost brake system has a hard pedal with little braking action. What could be the cause? - correct answer Low power steering fluid What could cause excessive noise while braking? - correct answer Missing clips A vehicle equipped with a "hill holding" option has an ABS code. W...

ASE A2 Exam Review Update 2024 Q’s & A’s What is the purpose of a brake band? - ANS-It stops and holds the drum that is connected to a member of the planetary gearset. What are brake bands made out of? - ANS-Brake bands are flexible steel plates lined with friction material. That material can be organic or semi-metallic. What aids in brake band hear dissipation? - ANS-The friction material absorbs trans fluid. When the brake band tightens around the drum, why doesnt trans fluid get tr...

ASE ASSOCIATE EXAM 2024 WITH 100% ACCURATE SOLUTIONS Brake Pad Minimum Thickness Customer Pay Warranty CPO - ANSWER ☑☑Customer Pay: 3mm Warranty: 4mm (3.9mm) CPO: 5 mm Brake bleed pressure setting (bar): - ANSWER ☑☑2 bar max - Location of MSDS: - ANSWER ☑☑Online CPO test drive (length and distance): - ANSWER ☑☑20 uninterrupted minutes/ 5 continuous miles Caliper bleeding with 2 bleed screws - ANSWER ☑☑Outer bleeder first, then inner - Is pres...

ASE A5 Practice Test Brakes | Questions and Verified Answers | Latest Update 2024/2025 A vehicle with ABS anti-lock brakes has an audible clicking noise when it is first started. The noise goes away after a few seconds. Technician A says this is one of the hydraulic valves in the hydraulic valve assembly sticking. Technician B says this is a normal condition. Who is correct? - Answer -TECH B is correct. The ABS system runs a system check when the key is first turned to the ON position. T...

ASE BRAKE FINAL CURRENT - EXAM QUESTIONS WITH VERIFIED ANSWERS...