Ase a5 brakes technician - Study guides, Class notes & Summaries

ASE Brakes A5 Test ( Exam 2 ) The brakes are dragging on a vehicle. this could be cause by a. overfilled master cylinder reservoir b. low vacuum to the boost c. bypassing master cylinder d. quick take-up valve stuck open - A : overfilled master cylinder reservoir why : an overfilled master cylinder reservoir cylinder would not allow for fluid expansion. this would cause the brakes to self apply as the fluid expanded as result in brake drag The brake pads are worn at an angle on a...

ASE A5 Practice Test Questions and Answers 1. On a car with disc/drum brakes, the front brakes grab quickly when light pedal pressure is applied. This problem could be caused by a bad: A. proportioning valve B. pressure safety switch C. metering valve D. residual check valve - Ans:-C 2. The driver of a vehicle with power disc/drum brakes says that the brake pedal moves slowly to the floor while maintaining pedal pressure at a stoplight. What could cause this problem? ©GRACEAMELIA 2...

ASE A5 Brakes Test A hydro-boost brake system has reduced braking performance. Technician A says to check the power steering system. Technician B says to check the vacuum check valve. Who is correct? - TECH A is correct. The power steering pump produces pressure for the Hydro-Boost unit. A vehicle with power assisted brakes has a hard brake pedal. Which of the following is LEAST likely to cause this condition? A. Master cylinder. B. Vacuum check valve. C. Brake booster. D. Low man...

ASE A5 Practice Test (Brakes) | Questions and Correct Answers | Latest Update 2024/2025 A spongy brake pedal may be caused by: a. ABS Diagnostic Trouble Code set b. Frozen caliper piston c. Defective metering valve. d. Air in hydraulic system - Answer -D This question is not like the others. It has the word EXCEPT. For this question, look for the choice that could NOT cause the described situation. Read the entire question carefully before choosing your answer. A vehicle has a very er...

ASE: A5 BRAKES EXAM 2024 WITH 100% CORRECT ANSWERS A drum is chattering on the brake lathe. This could be the result of: - correct answer Failure to install the dampening belt A vehicle equipped with a hydro-boost brake system has a hard pedal with little braking action. What could be the cause? - correct answer Low power steering fluid What could cause excessive noise while braking? - correct answer Missing clips A vehicle equipped with a "hill holding" option has an ABS code. W...

ASE (Entry level technician prep) - Brakes A5 A5 Question 1 The brake pedal is low and spongy; all brake adjustments have been completed according to specifications. The cause of the problem could be: A) Binding pedal linkage. B)Dented brake line. C)Plugged compensating port. D)A weak hydraulic hose. Answer D is correct! Binding pedal linkage would cause a hard pedal and perhaps an effective brake system. This is also true for a dented brake line. A plugged compensator port ma...

ASE A5 Test Questions with 100% Correct Answers | Latest Version 2024 | Verified 1. On a car with disc/drum brakes, the front brakes grab quickly when light pedal pressure is applied. This problem could be caused by a bad: A. proportioning valve B. pressure safety switch C. metering valve D. residual check valve - C 2. The driver of a vehicle with power disc/drum brakes says that the brake pedal moves slowly to the floor while maintaining pedal pressure at a stoplight. What could c...

ASE A5 Brakes Automotive Certification Test Questions and Answers The brakes are being bled on an older vehicle equipped with a quick take up valve in the master cylinder. Technician A says the quick take up valve must be depressed. Technician B says the brakes on this vehicle cannot be bled. Who is right? a. A only b. B only c. Both A and B d. Neither A nor B Both technicians are wrong. The brakes on quick take up systems use the same bleeding procedure as those without this valve. ...

ASE A5 Practice Test Brakes Exam A vehicle with ABS anti-lock brakes has an audible clicking noise when it is first started. The noise goes away after a few seconds. Technician A says this is one of the hydraulic valves in the hydraulic valve assembly sticking. Technician B says this is a normal condition. Who is correct? - Answer ️️ -TECH B is correct. The ABS system runs a system check when the key is first turned to the ON position. The valves sometimes make a clicking noise during t...

ASE A5 Practice Test (Brakes) Exam Questions And Answers (Verified And Updated) A spongy brake pedal may be caused by: a. ABS Diagnostic Trouble Code set b. Frozen caliper piston c. Defective metering valve. d. Air in hydraulic system - answerD This question is not like the others. It has the word EXCEPT. For this question, look for the choice that could NOT cause the described situation. Read the entire question carefully before choosing your answer. A vehicle has a very erratic brake...