Commercial Refrigeration Certification
Exam Questions With 100% Verified
Answers.
In a dry type (direct expansion) evaporator, liquid refrigerant must boil away as close to the end
of the coil as possible in order to:
A. operate at high efficiency.
B. ensure that frost does not accumulate.
C. sub-cool the compressor.
D. ensure proper oil return. - answer✔A. operate at high efficiency.
The difference between the temperature of the refrigerant boiling in the evaporator and the
temperature at the evaporator outlet is known as:
A. evaporator superheat.
B. latent heat.
C. evaporator sub-cooling.
D. sublimation. - answer✔A. evaporator superheat.
An expansion device that is stuck open will cause:
A. low suction pressure
B. a starved evaporator.
C. excessive superheat
D. a flooded evaporator - answer✔D. a flooded evaporator
When measuring evaporator superheat on a commercial system that has a long suction line, the
pressure reading should be taken at the:
A. compressor inlet.
D. receiver Inlet. - answer✔A. compressor inlet. (Suction Line)
Superheat measurements are best taken:
A. during a hot pull down.
B. at 8°F to 12°F.
C. during defrost.
D. with the system operating at design conditions. - answer✔D. with the system operating at
design conditions.
A technician is checking the superheat on a multi circuit evaporator and finds one of the circuits
has a superheat that is higher than the others. This could be caused by:
A. a dirty coil.
B. a refrigerant overcharge
C. uneven air distribution.
D. a blocked distributor. - answer✔D. a blocked distributor.
A TEV with an external equalizer is used on:
A. evaporators with a high pressure drop.
B. evaporators with a low pressure drop.
C. high temperature applications only.
D. all evaporators. - answer✔A. evaporators with a high pressure drop.
Dry type evaporators operate most efficiently with a superheat setting of approximately:
A. 8° F to 12°F
B. 13° F to 19°F
C. 20° F to 30°F
D. 31° F to 40° F - answer✔A. 8° F to 12°F
An evaporator used to chill liquids in operating with a normal superheat setting, but the system is
not cooling the product properly. Which of the following is the most likely cause?
A. overcharge of refrigerant
D. the TEV - answer✔C. the circulator
What time interval is required between each superheat adjustment?
A. Not less than 1 hour
B. About 10-15 minutes
C. At least 1/2 hour.
D. No time delay. - answer✔B. About 10-15 minutes
A low temperature evaporator used for cooling space or product refrigeration:
A. is the same as one used for medium or high temperatures.
B. must have fins spaced closer together.
C. must be frosted periodically.
D. must be defrosted periodically. - answer✔D. must be defrosted periodically.
Some special applications use a flooded evaporator (operated full of refrigerant). In order to
maintain the proper level of liquid refrigerant, a ____ type metering device is used.
A. TEV
B. capillary tube
C. AEV
D. float - answer✔D. float
A properly functioning condenser will first:
A. condense then de-superheat.
B. subcool then de-superheat.
C. subcool then superheat.
D. de-superheat then subcool. - answer✔D. de-superheat then subcool.
Tube within a tube, shell and coil, and shell and tube are all types of:
A. water cooled condensers.
B. air cooled condensers.
Les avantages d'acheter des résumés chez Stuvia:
Qualité garantie par les avis des clients
Les clients de Stuvia ont évalués plus de 700 000 résumés. C'est comme ça que vous savez que vous achetez les meilleurs documents.
L’achat facile et rapide
Vous pouvez payer rapidement avec iDeal, carte de crédit ou Stuvia-crédit pour les résumés. Il n'y a pas d'adhésion nécessaire.
Focus sur l’essentiel
Vos camarades écrivent eux-mêmes les notes d’étude, c’est pourquoi les documents sont toujours fiables et à jour. Cela garantit que vous arrivez rapidement au coeur du matériel.
Foire aux questions
Qu'est-ce que j'obtiens en achetant ce document ?
Vous obtenez un PDF, disponible immédiatement après votre achat. Le document acheté est accessible à tout moment, n'importe où et indéfiniment via votre profil.
Garantie de remboursement : comment ça marche ?
Notre garantie de satisfaction garantit que vous trouverez toujours un document d'étude qui vous convient. Vous remplissez un formulaire et notre équipe du service client s'occupe du reste.
Auprès de qui est-ce que j'achète ce résumé ?
Stuvia est une place de marché. Alors, vous n'achetez donc pas ce document chez nous, mais auprès du vendeur Brainbarter. Stuvia facilite les paiements au vendeur.
Est-ce que j'aurai un abonnement?
Non, vous n'achetez ce résumé que pour €11,24. Vous n'êtes lié à rien après votre achat.
