Exam (elaborations)
ESCO Heating 208 Exam Questions With 100% Correct & Verified Answers.
- Course
- Institution
ESCO Heating 208 Exam Questions With 100% Correct & Verified Answers.
[Show more]
Content preview
ESCO HEATING 208ESCO Heating 208 Exam Questions With
100% Correct & Verified Answers.
1. A gas furnace is to be installed in a garage. The burners and ignition sources must be located
______ above the floor.
A: 6 inches
B: 12 inches
C: 18 inches
D: 24 inches - ✔✔✔ - C: 18 inches
2. A good description of how hi-metai fan switch operates the blower motor on a gas furnace is:
A: temperature on - time off.
B: temperature on - time on.
C: temperature on- temperature off.
D: time on - time off. - ✔✔✔ - C: temperature on- temperature off
3. Redundant gas valves used on gas furnaces will shut down if gas pressure exceeds:
A: 30.5 in. W.C.
B: 60.5 in. W.C.
C: 10.5 in. W.C.
D: 13.5 in. W.C. - ✔✔✔ - D: 13.5 in. W.C.
4. Burning one cubic foot of Liquefied Petroleum gas completely will produce approximately
____BTU's.
ESCO HEATING 208 Page 1
,ESCO HEATING 208
A: 2,000 - 2,500
B: 1,500-2.000
C: 1,200-1,500
D: 900-1,100 - ✔✔✔ - A
5. LP gas has a specific gravity of:
A: .4-.8
B: 1.0-1.1
C: 1.5-2.0
D: 2.5 -3.0 - ✔✔✔ - C: 1.5-2.0
6. What is the purpose of a spoiler screw located on a burner?
A: Mix combustion and dilution air
B: Mix primary and secondary air.
C: Mix primary air and gas.
D: Mix dilution and excess air. - ✔✔✔ - C: Mix primary air and gas
7. Furnace limit switches are wired in series with the:
A: low speed fan
B: high speed fan
C: gas valve
D: heat anticipator - ✔✔✔ - C: gas valve
ESCO HEATING 208 Page 2
, ESCO HEATING 208
8. A technician is using an extension ladder to work on roof top unit. The top of the ladder
should extend beyond the support point.
A: l foot
B: 2 feet
C: 3 feet
D: 4 feet - ✔✔✔ - C: 3 feet
9.A technician determines that a natural gas furnace has a defective heat exchanger. The
technician should:
A: inform the homeowner.
B: turn the thermostat off.
C: turn the gas to the furnace off.
D: All of the above. - ✔✔✔ - D: All of the above.
10. A natural gas (standing pilot) furnace usually requires ____gas pressure at the manifold and
burners.
A: 3.5 in- W.C.
B: 4.2 in. W.C.
C: 5.0 in, W.C.
D: 7.0 in. W.C. - ✔✔✔ - A: 3.5 in- W.C.
11. The vent system for a condensing furnace is classified as ______by the National Field Gas
Code.
A: Category I
B: Category II
C: Category III
ESCO HEATING 208 Page 3
The benefits of buying summaries with Stuvia:
Guaranteed quality through customer reviews
Stuvia customers have reviewed more than 700,000 summaries. This how you know that you are buying the best documents.
Quick and easy check-out
You can quickly pay through credit card or Stuvia-credit for the summaries. There is no membership needed.
Focus on what matters
Your fellow students write the study notes themselves, which is why the documents are always reliable and up-to-date. This ensures you quickly get to the core!
Frequently asked questions
What do I get when I buy this document?
You get a PDF, available immediately after your purchase. The purchased document is accessible anytime, anywhere and indefinitely through your profile.
Satisfaction guarantee: how does it work?
Our satisfaction guarantee ensures that you always find a study document that suits you well. You fill out a form, and our customer service team takes care of the rest.
Who am I buying these notes from?
Stuvia is a marketplace, so you are not buying this document from us, but from seller Boffin. Stuvia facilitates payment to the seller.
Will I be stuck with a subscription?
No, you only buy these notes for $15.49. You're not tied to anything after your purchase.
Can Stuvia be trusted?
4.6 stars on Google & Trustpilot (+1000 reviews)
72042 documents were sold in the last 30 days
Founded in 2010, the go-to place to buy study notes for 14 years now