When it is necessary to install a hot top connection or add a reinforcing plate to
an existing un-reinforced penetration, API 653 requires what type, extent, and
purpose of examination.
A) Magnetic particle examination for slight sub-surface discontinuities shall be
performed in an area equal to twice the diameter of the opening
B) Radiographic examination for cracking shall be performed in the immediate
area
C) Ultrasonic examination for cracking shall be performed in the immediate area
D) Ultrasonic examination for lamination shall be performed in the immediate
area - ANSWERS-D
Gnereally, tank in petroleum service use ____ on the internal surfaces to control
internal corrosion.
A) AC current instead of DC current cathodic protction systems
B) coatings
C) Cathodic protection in conjunction with coatings
D) Since pure hydrocarbon fluids are usually not corrosive experience shows that
internal corrosion will never occur therefore, corrosion control is not necessary -
ANSWERS-B
,API 650 requires telltale holes in reinforcing plates. What is the required
dimension of this hole and what should be done with it after the initial re-pad
pressure test?
A) The hole shall be 3/8" and shall be left open to the atmosphere
B) The hole shall be 1/4" and shall be left open to the atmosphere
C) The hole shall be 3/8" abd shall be closed after testing
D) The hole shall be 1/4" and shall be closed after testing - ANSWERS-B
Repair plates for lapped patch repairs may square or rectangular in shpae. These
plates must be provided with a corner radius of at least:
A) Radius of 1 inch
B) Radius of 2 inches
C) Radius of 3 inches
D) Radius of 4 inches - ANSWERS-B
During the installation of a new steel bottom over an existing steel bottom, which
has been repaired, of water or other electrolyte intrudes into the interstitial
space, what can happen?
A) a galvanic cell may form which will cuase the new steel tank bottom to corrode
at an accelerated rate
,B) An electrochemcical reaction may take place creating hazardous gasses
C) a galvanic cell may form which will cause the old tank bottom to corrode at an
accelerated rate.
D) A galvanic cell may from which will turn the old tank bottom into an anode -
ANSWERS-A
What test is used to determine a materials notch toughness?
A) Impact test
B) Bend test
C) tensile test
D) elongation test - ANSWERS-A
When it is necessary to install a new tank bottom above an existing, it may be
necessary to alter existing shell penetrations. This procedure may require the
existing reinforcing plate to be removed and a new reinforcement plate is added.
This is not permitted when what condition exists?
A) The assembly was originally hardness tested
B) The existing assembly was not impact tested
C) The existing assemby was fabricated from re-claimed material
D) The existing assembly was stress relieved - ANSWERS-D
, The owner/operator is required to maintain complete record file consisting of
three types of records. Which of the following is not one of the three types of
records?
A) Repair/alteration history
B) Fill cycles
C) Construction
D) Inspection - ANSWERS-B
In ultrasonic thickness, the higher the temperature of the steel being examined,
the:
A) reading cannot be obtained
B) higher the reading
C) lower the reading
D) reading will not be affected - ANSWERS-B
ASME section V states the extent of radiographic examination is specified:
A) The extent of any examination will be dictated by the Authorized Inspector
based on his experience
B) The extent of examination shall be as specified by the referencing code
C) the extent of examination will be as specified in SNT-TC-1A
The benefits of buying summaries with Stuvia:
Guaranteed quality through customer reviews
Stuvia customers have reviewed more than 700,000 summaries. This how you know that you are buying the best documents.
Quick and easy check-out
You can quickly pay through credit card or Stuvia-credit for the summaries. There is no membership needed.
Focus on what matters
Your fellow students write the study notes themselves, which is why the documents are always reliable and up-to-date. This ensures you quickly get to the core!
Frequently asked questions
What do I get when I buy this document?
You get a PDF, available immediately after your purchase. The purchased document is accessible anytime, anywhere and indefinitely through your profile.
Satisfaction guarantee: how does it work?
Our satisfaction guarantee ensures that you always find a study document that suits you well. You fill out a form, and our customer service team takes care of the rest.
Who am I buying these notes from?
Stuvia is a marketplace, so you are not buying this document from us, but from seller Teacher101. Stuvia facilitates payment to the seller.
Will I be stuck with a subscription?
No, you only buy these notes for $17.99. You're not tied to anything after your purchase.