BOMA-Instrumentation & Controls with
Complete Solutions
A 3" diameter diaphragm has 20 PSIG acting upon it. The force expected would be
_____. - ANSWER-141 inch pounds
A combination starter is a switch for disconnecting and a starter mounted and one
enclosure. - ANSWER-True
A compensated control is best described as a control with a readjusted control/set point.
An example of a compensated control is _____. - ANSWER-Submaster thermostat
A decrease in percentage of proportional band/throttling range would increase the
sensitivity of the instrument. - ANSWER-True
A hygroscopic material is described as material that is able to absorb or condense
moisture from the atmosphere. - ANSWER-True
A master thermostat develops a specific branch pressure, equivalent to a measured
temperature. A device that works on this principle is a _____. - ANSWER-Temperature
transmitter
A motor control circuit that is designed so that it must be restarted by pushing a start
button after a power interruption is a _____. - ANSWER-3 wire control
A P.E. Switch is used to change an electrical signal to a pneumatic output. - ANSWER-
False
A static pressure regulator senses the pressure in the plenum the regulator controls.
The sensor that indicates this pressure to this regulator is called a_____? - ANSWER-
Static tip
A static pressure transmitter has a range of 0-3 inches of water. What pneumatic
equivalent (output pressure) would you expect to find at 1.5 inches of water? -
ANSWER-9 PSIG
A submaster controller resets the set point of the master controller. - ANSWER-False
A What pressure spring would be in this motors? - ANSWER-10 PSIG
Accuracy: - ANSWER-An instrument's ability to indicate or record the actual value of a
measured quantity.
, Capacity index: - ANSWER-Quantity of water at 60 degrees Fahrenheit that flows
through a given valve with a pressure drop of 1 PSIG. Sometimes called flow
coefficient.
Compressor motor: - ANSWER-
Compressor relay: - ANSWER-
Condenser fan motor: - ANSWER-
Contactor coil 1 pulls in an electric strip heater on a cold air duct to a room. The
pneumatic room thermostat operates PS1. The thermostat action is what control action?
- ANSWER-Reverse
Could the absorption of moisture from humid air, people, wood, paper, cloth and other
hygroscopic materials increase the sensible heat/temperature of a room? - ANSWER-
Yes
Damper motors are manufactured in a number of spring ranges. Probably the most
common is a _____ to _____ PSIG range. - ANSWER-3 to 13 PSIG
Determine the sensitivity of the control (PSIG/Fahrenheit) by the information given. 3-15
PSIG (pressure span) 78-90 degrees Fahrenheit (temperature span). - ANSWER-?
Deviation: - ANSWER-Departure of the control point from the set point of the amount of
that departure.
Dew Point: - ANSWER-The temperature at which dew forms or condensation or vapor
occurs.
Direct Acting: - ANSWER-The action of a controller that increases its branch line
pressure as the controlled variable increases.
Feedback: - ANSWER-Pressure developed by the flow of speed of the air impacting
upon a probe.
Full load amperage of the motor is the same as starting current. - ANSWER-False
H.O.A. switch: - ANSWER-
High pressure switch: - ANSWER-
If the ambient temperature increased and the bimetal warped toward the nozzle (down),
the control action would be _____? - ANSWER-Direct action
The benefits of buying summaries with Stuvia:
Guaranteed quality through customer reviews
Stuvia customers have reviewed more than 700,000 summaries. This how you know that you are buying the best documents.
Quick and easy check-out
You can quickly pay through credit card or Stuvia-credit for the summaries. There is no membership needed.
Focus on what matters
Your fellow students write the study notes themselves, which is why the documents are always reliable and up-to-date. This ensures you quickly get to the core!
Frequently asked questions
What do I get when I buy this document?
You get a PDF, available immediately after your purchase. The purchased document is accessible anytime, anywhere and indefinitely through your profile.
Satisfaction guarantee: how does it work?
Our satisfaction guarantee ensures that you always find a study document that suits you well. You fill out a form, and our customer service team takes care of the rest.
Who am I buying these notes from?
Stuvia is a marketplace, so you are not buying this document from us, but from seller CLOUND. Stuvia facilitates payment to the seller.
Will I be stuck with a subscription?
No, you only buy these notes for $10.49. You're not tied to anything after your purchase.