100% satisfaction guarantee Immediately available after payment Both online and in PDF No strings attached
logo-home
Sample Questions RBC With Complete Solutions. $10.99   Add to cart

Exam (elaborations)

Sample Questions RBC With Complete Solutions.

 0 view  0 purchase
  • Course
  • Sample RBC
  • Institution
  • Sample RBC

Sample Questions RBC With Complete Solutions. A wall on a drawing with a scale of 1/4" =1-foot measures 5 1/2". How long is the wall in feet? - correct answer. 22' - (5 1/2= 5 2/4 5X4=20 +2 =22') A line on a drawing is composed of long and short dashes. What is the name of this ...

[Show more]

Preview 3 out of 17  pages

  • November 4, 2024
  • 17
  • 2024/2025
  • Exam (elaborations)
  • Questions & answers
  • Sample RBC
  • Sample RBC
avatar-seller
techgrades
Sample Questions RBC With Complete
Solutions.


A wall on a drawing with a scale of 1/4" =1-foot measures 5 1/2". How long is the wall in
feet? - correct answer. 22' - (5 1/2= 5 2/4 5X4=20 +2 =22')

A line on a drawing is composed of long and short dashes. What is the name of this
line? - correct answer. A centerline

Most construction lumber is cut ____ sawn - correct answer. Flat sawn

What is the minimum nominal thickness of the ridge board? - correct answer. 1 inch

How Many jack studs will be required for a 2-2x12 header in an interior bearing wall
supporting one floor only, building width of 28', and a span of 7'-0" - correct answer.
2 Jack stud required

What is the maximum hole that may be cut in a 2X12 nominal floor joist? - correct
answer. 4" Inches

What size strap is required if a top plate is notched more than 50% of its width? -
correct answer. 16 gage in thickness and 1 1/2" wide

The end of a wood joist must bear on a wood beam by at least _____inches? - correct
answer. 1 1/2

The dimension of fine aggregate in concrete is up to ___ " in diameter and coarse
aggregate is larger than_____". - correct answer. 1/4 for both

Concrete gains most of its strength in how many days? - correct answer. 28 days

In what section of the span of a floor joist is it NOT permitted to cut a notch? - correct
answer. Middle third

,What material is required for the door of an ash dump cleanout? - correct answer.
Ferrous metal or masonry

A cricket is required when the width of a chimney is greater than _____inches. - correct
answer. 30"

In what direction must the access gate of a pool swing? - correct answer. Outwards

What is the minimum ceiling height over a bathtub? - correct answer. 6'-8"

What is the maximum unsupported height of a pier consisting of 12"X16" hollow core
blocks filled with type S mortar? - correct answer. 120"

What is the least outside circular diameter of a handrail? - correct answer. 1 1/4"

Insulation shall have a smoke-developed index not to exceed? - correct answer. Not
to exceed 450

From where must a smoke alarm draw its primary power? - correct answer. building
wiring

What is the live load of an attic with habitable space? - correct answer. 30 #

What is the required width and height of the egress door?___X___? - correct answer.
32X78

The header is an exterior bearing wall of a building that is 28 feet wide, 50 pound snow
load, supports a roof, ceiling and one center bearing floor. If 3-2X12S are used, what is
the allowable span? - correct answer. 8'-0"

How far into concrete must anchor bolts extend? - correct answer. 7"

What is the maximum height of the backfill for a play masonry foundation wall, 8" high
and 8" thick, is constructed in type GW soil? - correct answer. 5'

If a footing is 18" wide, what is the maximum width of a foundation wall placed on this
footing? - correct answer. 14"

What is the slope allowance for the bottom of a footing___in ____ - correct answer.
1 unit in 10 = 10% Slope

How far must foundation gravel extend above the footing drain? - correct answer. 6"

What distance from a wall must be base of a ladder be placed that has a working length
of 16'? - correct answer. 4' -it is 1/4 the working length

, What is the term for the basic starting point for the layout of a building? - correct
answer. benchmark

What is required to vent a hip roof? - correct answer. soffit and ridge vents

What is the overlap in inches of nominal 8" Palin-bevel wood siding board? - correct
answer. 1 1/4" plain bevel wood siding

What is the nailing requirement for a plywood soffit? - correct answer. 4D nails
spaced 6" apart

What is the spacing In inches pf veneer ties? - correct answer. 36 inches

What is the minimum penetration of a drywall screw into wood ? - correct answer.
5/8"

What is the minimum width of a stairway? - correct answer. 36"

What is the most often used hinge for hanging residential doors? - correct answer.
loose pin butt mortise hinge

What size window is required in a bathroom if there is no mechanical ventilation? -
correct answer. 3 square feet

What is the minimum width of a hallway? - correct answer. 3'

In Virginia, what are the R Value insulation requirements for the ceiling, wall, and floor. -
correct answer. 49, 20, 19

The under-floor space vents must be covered with material with a least dimension of? -
correct answer. 1/4"

What is the maximum slump of concrete placed in removable forms? - correct answer.
6"

The end joints of double top plates must be offset at least________? - correct answer.
24"

What's the required clearance of wood siding from the ground before it is required to be
preservative treated ? - correct answer. 6"

What is required to support brick veneer above openings in exterior walls? - correct
answer. Lintel

What is the minimum stroke width of site address numbers? - correct answer. 1/2"

The benefits of buying summaries with Stuvia:

Guaranteed quality through customer reviews

Guaranteed quality through customer reviews

Stuvia customers have reviewed more than 700,000 summaries. This how you know that you are buying the best documents.

Quick and easy check-out

Quick and easy check-out

You can quickly pay through credit card or Stuvia-credit for the summaries. There is no membership needed.

Focus on what matters

Focus on what matters

Your fellow students write the study notes themselves, which is why the documents are always reliable and up-to-date. This ensures you quickly get to the core!

Frequently asked questions

What do I get when I buy this document?

You get a PDF, available immediately after your purchase. The purchased document is accessible anytime, anywhere and indefinitely through your profile.

Satisfaction guarantee: how does it work?

Our satisfaction guarantee ensures that you always find a study document that suits you well. You fill out a form, and our customer service team takes care of the rest.

Who am I buying these notes from?

Stuvia is a marketplace, so you are not buying this document from us, but from seller techgrades. Stuvia facilitates payment to the seller.

Will I be stuck with a subscription?

No, you only buy these notes for $10.99. You're not tied to anything after your purchase.

Can Stuvia be trusted?

4.6 stars on Google & Trustpilot (+1000 reviews)

83637 documents were sold in the last 30 days

Founded in 2010, the go-to place to buy study notes for 14 years now

Start selling
$10.99
  • (0)
  Add to cart