OSHA 500 Actual Exam Solved Reviewed Combined 500+ Questions With Revised Correct Detailed Answers >Latest Update>>
4 views 0 purchase
Course
OSHA 500
Institution
OSHA 500
OSHA 500 Actual Exam Solved
Reviewed Combined 500+
Questions With Revised Correct
Detailed Answers
>Latest Update>>
1. What are the four main types of electrical injuries? - ANSWER
Electrocution, electric shock, burns, indirect (e.g., a fall from a ladder)
2. 2....
OSHA 500 Actual Exam Solved
Reviewed Combined 500+
Questions With Revised Correct
Detailed Answers
NEW >Latest Update>>
1. What are the four main types of electrical injuries? - ANSWER
Electrocution, electric shock, burns, indirect (e.g., a fall from a ladder)
2. 2. A shock's severity depends on: - ANSWER -- Length of exposure to
electricity
◼ The amount of current and its frequency
◼ The current's path
3. Electrical burns are the most serious of the three major types of burns, and
most often occur: - ANSWER On the hands, from direct contact with
current
4. Hot wires, ungrounded wires that can cause a shock if you touch them, are
usually: - ANSWER black or red
5. More than 50 percent of electrocutions are caused by a worker coming in
direct contact with: - ANSWER energized power lines
,6. The OSHA standard requires flexible cords to be rated for: - ANSWER
Hard or extra hard usage
7. What is the most frequent violation of OSHA electrical standards? - ANSWER
improper grounding of circuitry and equipment
8. The three elements of a basic program for electrical safety are: - ANSWER
recognize, evaluate and control
9. All portable electric tools that are damaged shall be: - ANSWER Removed
and tagged "Do Not Use"
10.If you have a three-prong plug and a two-hole receptacle, it is acceptable to: -
ANSWER Use an adapter with an adapter wire connected to known
ground
11.All hazards involved in the use of power tools can be prevented by following
five basic safety rules: Keep all tools in good condition with regular
maintenance; examine each tool for damage before use; operate according to
the manufacturer's instructions; provide and use the proper protective
equipment; and: - ANSWER use the right tool for the job
12.Live parts of electric equipment operating at 50 volts or more must be: -
ANSWER guarded against electrical contact
,13.While any employee is exposed to contact with parts of electric equipment or
circuits that have been de-energized, the circuits energizing the parts shall be:
- ANSWER Locked out or tagged out or both
14.Low voltage does not mean low hazard. - ANSWER true
15.The two best means of avoiding electrical shock or injury when working with
power tools are: - ANSWER Insulation and grounding
16.The majority of today's power line accidents occur because: - ANSWER Of
failure to maintain proper work distances
17.A ground-fault circuit interrupter (GFCI) protects workers from shock by: -
ANSWER Matching the amount of current going into an electrical device
against the amount returning from the device and shutting down power if a
ground fault is detected
18.AEGCP's are implemented on construction sites to oversee: - ANSWER --
All cord sets
◼ Cord sets and equipment connected by plug and cord
◼ Receptacles that are not part of a building or structure
19.The OSHA standard mandates that any time a worker is at a height of six feet
or more, the worker is at risk and needs to be protected. Most fatalities,
however, happen when workers fall from: - ANSWER Roofs
20.Employers must ensure that all walking and working surfaces have the
structural integrity to: - ANSWER Support workers safely
, 21.Controlled access zones serve a dual purpose - they allow specially trained
individuals (such as masons) to operate without traditional fall protection
within a certain area, and: - ANSWER They keep unauthorized individuals
out
22.A system used to arrest a worker in a fall from a working level that consists of
an anchorage, connectors, a body belt or body harness, and may include a
lanyard, deceleration device, lifeline, or suitable combinations of these is
called a: - ANSWER Personal Fall Arrest System (PFAS)
23.When no other alternative fall protection has been implemented, the
employer shall implement a safety monitoring system. Employers must: -
ANSWER Ensure that the safety monitor is a competent person
knowledgeable about fall protection
24.At holes, guardrail systems must be set up: - ANSWER On all unprotected
sides and edges
25.The top edge of a guardrail must be from 39 to 45 inches above the
walking/working level, and there must also be a means of protection from: -
ANSWER Falling objects between top rail and walking surface
26.Employers must provide a training program that teaches employees who
might be exposed to fall hazards: - ANSWER How to recognize such
hazards and how to minimize them
The benefits of buying summaries with Stuvia:
Guaranteed quality through customer reviews
Stuvia customers have reviewed more than 700,000 summaries. This how you know that you are buying the best documents.
Quick and easy check-out
You can quickly pay through credit card or Stuvia-credit for the summaries. There is no membership needed.
Focus on what matters
Your fellow students write the study notes themselves, which is why the documents are always reliable and up-to-date. This ensures you quickly get to the core!
Frequently asked questions
What do I get when I buy this document?
You get a PDF, available immediately after your purchase. The purchased document is accessible anytime, anywhere and indefinitely through your profile.
Satisfaction guarantee: how does it work?
Our satisfaction guarantee ensures that you always find a study document that suits you well. You fill out a form, and our customer service team takes care of the rest.
Who am I buying these notes from?
Stuvia is a marketplace, so you are not buying this document from us, but from seller NURSINGDICTIONARY. Stuvia facilitates payment to the seller.
Will I be stuck with a subscription?
No, you only buy these notes for $17.99. You're not tied to anything after your purchase.
