DEFENSE BASIC PRESERVATION AND PACKING
CERTIFICATION AND PRACTICE EXAM NEWEST
ACTUAL EXAM COMPLETE 250 QUESTIONS AND
CORRECT DETAILED ANSWERS (VERIFIED
ANSWERS) |ALREADY GRADED A+
You have received items you've never packaged before. Where do you find their
preservation and packaging requirements? - ANSWERArmy Publishing website
You found an item's 12-digit packaging code. To look it up, you need to use the tables in
- ANSWERMIL-STD-2073-1, Appendix J
What type of cushioning and dunnage material does this 12-digit packaging code
require?
P,B,000,32,1,07,GH,ZZ Z Z, , 00, 0, ED, P, 00,B - ANSWERNo requirement
What type of preservation material does this 12-digit packaging code require?
P,B,000,32,1,ZZ,GH, 01 B E, , BG,0,ED,P,00,B - ANSWERSpecial instructions apply
You look up the FLIS packaging requirements for an item. It's 4-digit category code is
"ZZ Z Z", which means it - ANSWERis selective or has special instructions
You need to clean an item that you have not handled before. To determine its cleaning
process, you check the item's - ANSWER12-digit packaging code
An item has a cleaning code of "1". What does that mean? - ANSWERYou decide the best
way to clean the item without injuring the item
Which statement is NOT a basic cleaning and drying requirement? - ANSWERAvoid
manually drying items
To decide the best cleaning process (or processes) for an item, you should consider the -
ANSWERtype of contaminant(s) and the item's characteristics
An item requires immediate, heat-based drying. Using the approved drying process, you
can either put the item under and infrared lamp or - ANSWERput it in a heated-air oven
,Which of the approved drying processes DO NOT use heat? - ANSWERAllowing the item
to drip-dry in a drainer
Wiping the item dry with lint-free cloths
Blowing off moisture with compressed air
Which publication defines item preservation requirements for military items? -
ANSWERMIL-STD-2073-1
Where would you go to find out which preservative material this item requires?
P,B,000,32,1,13,GH,ZZ Z Z, ,BG,B,ED,P,00,B - ANSWERMIL-STD-2073-1, Table J-III
Which type of preservative releases vapors that form an invisible protective film around
an item to protect it from corrosion? - ANSWERVolatile Corrosion Inhibitors (VCI)
Where would you go to find out which cushioning material this item requires?
P,B,000,32,1,13,GH,ZZ Z Z, , BG,B,ED,P,00,B - ANSWERMIL-STD-2073-1 Table J-V
Which of these preservatives is considered permanent? - ANSWERPaint
You're packaging an item that requires A-A-59135 packaging material, but you don't have
any in the shop. What action should you take? - ANSWERUse a material that meets or
exceeds the requirement
Which type of heat sealer should NOT be used on thin plastic barrier material? -
ANSWERContinuous heat sealer
When handling a static-sensitive device, which precaution should you take? -
ANSWERUse a static-safe workstation
Which military method of preservation is used to protect against watervapor? -
ANSWERMethod 40
Which specific MOP procedure does this item require?
P,B,000,32,1,07,GH,ZZ Z,Z , BG, B, ED,P,00,B - ANSWERContainer, waterproof bag, heat
sealed
Where can you find descriptions of specialized, alphabetic methods of preservation that
are more detailed than the standard MOP codes? - ANSWERMIL-STD-2073-1, Table J-Ia
Which military method of preservation uses activated desiccant to absorb moisture? -
ANSWERMethod 50
Which items are required for all MOP 50 submethods? - ANSWERDesiccant
Method 50 label
humidity indicator
, You are packaging an item in accordance with Method 30. The item is 20 inches wide by
40 inches long by 10 inches high. What width of barrier material do you need? -
ANSWER103 inches
You are packaging an item in accordance with Method 30. The item is 20 inches wide by
40 inches long by 10 inches high. What length of barrier material do you need? -
ANSWER63 inches
After wrapping, these goggles are 10 inches long by 3 inches high by 8 inches wide.
Which size barrier does it need? (method 41) - ANSWER25 inches long x 29 inches wide
You are packaging an item in accordance with Method 51. You need to know the area of
barrier contained in the package. The barrier is 60 inches wide by 85 inches long. What is
the area in square inches? - ANSWER5,100 square inches
You are packaging an item in a barrel in accordance with Method 55. The drum's radius is
15 inches and the drum's height is 36 inches. What is the drum's volume in cubic inches?
- ANSWER25,434 cubic inches
You are packaging an item following MOP 55. How many units of desiccant do you need
if the drum is 36 inches high with an 18 inch diameter and you used 0.25 pounds of
cellulosic paper, and 0.50 pounds of synthetic foam. Round up to the nearest whole unit.
- ANSWER9 units
Which item represents the Military Preservation Method and Date of Unit Preservation on
this unit pack label?
2910-00-456-7416
Cage 57685
M41/5-19 - ANSWERC
M41/5-19
You are training a new employee and need to make sure she understands why marking
containers correctly is important. Which benefits do you list? - ANSWERSpeeds
shipments
Eases handling
Processes quickly
Simplifies returns
You just received supplies that need to be repacked, relabeled, and shipped to other
military installations. Which resource should you use to ensure the new labels meet
standards? - ANSWERMIL-STD-129
Which item represents the national stock number on this unit packing label?
2910-00-456-7416
PN 341
DAA625-03-C-1056
M41/5-19 - ANSWERA
2910-00-456-7416
