Exam (elaborations)
NDT FINAL EXAM WITH CORRECT ANSWERS
- Course
- Institution
NDT FINAL EXAM WITH CORRECT ANSWERS
[Show more]
Seller
Follow
Content preview
NDT FINAL EXAM WITH CORRECTANSWERS
What does Method A refer to? - correct answer -Removal Methods
When is an unscheduled inspection performed? - correct answer -All Of the above
The advantage that liquid penetrant testing has over an unaided visual inspection is that: - correct
answer -It makes defects easier to see for the inspector
Which of the following is an advantage of Penetrant Testing? - correct answer -Both A and B.
What are the major requirements needed to become qualified in any NDT method? - correct answer -On
the Job Training and Classroom Instruction.
What manual reference identifies a non-aqueous Type I developer? - correct answer -5.04.5.A.4
The relevant indications of a post FPI/LPI inspection can appear as what? - correct answer -round circles,
continuous line, and intermittent line
Referencing your manual reference material, what would you use for the following penetrant system
classifications?
Penetrant Type: Type 1
Method of Removal: Method C
Sensitivity Level: Level 3
Developer: Form d - correct answer -High sensitivity fluorescent dye penetrant, solvent removable and
nonaqueous, type I fluorescent developer.
,You are assigned an FPI inspection on a suspected crack on an inlet cowl of a 767 on the ramp during
April in Chicago. You day time temp is 56 degrees, the sun is shining brightly. What is or are your
challenge(s) in performing this inspection? - correct answer -Your white light present at your inspection
area is going to be greater than 2 foot candles per your paperwork.
If the surface of the part has been machined, surface blasted, filed or sanded : - correct answer -The part
may also require etching.
Which type of penetrant is only a visible dye penetrant? - correct answer -Type II
Penetrants that are used to detect the smallest defects can create background fluorescence indications
on the part being inspected. Which of the following best describes background fluorescence: - correct
answer -All of the above
Recall from your lab, when signing for your work, what is not required to be included: - correct answer -
Date of calibration for the equipment used
What factors can be used to perform/schedule a scheduled inspection? - correct answer -Airframe
Cycles, Calendar Time, Flight Hours
The best NDT technique to use to find defects below the surface of a test piece made of aluminum
would be what? - correct answer -Ultrasound
When performing quality control checks on your black light prior to your FPI inspection, which of the
following is correct? - correct answer -Both B & C
Before you begin a fluorescent penetrant inspection you should: - correct answer -Both A & B
The most commonly used methods of nondestructive testing include: - correct answer -Ultrasound,
Magnetic Particle, Eddy Current, & Penetrant
, When fluorescent penetrant inspection is performed, the penetrant is formulated to glow brightly and
give off light at a wavelength that: - correct answer -The eye is most sensitive to under dim lighting
conditions while using an ultra violet light source.
Which of the following identifies the qualification levels of Non Destructive Testing: - correct answer -
Level 1 Limited, Level 1, Level 2 & Level 3
Generally, there is no harm in using a longer dwell time as long as the penetrant: - correct answer -
Remains on the part no longer than is allowed per the procedure in use.
Which NDT technique uses a magnetic field to detect defects? - correct answer -Magnetic Particle
It is important to know what type of defect you are looking for before you perform any type of NDT
inspection technique. - correct answer -True
Which level of penetrant is the most sensitive? - correct answer -Level 4
Which of the following is a disadvantage of Penetrant Testing? - correct answer -Both A and B.
Calibration stickers are used in NDT to ensure what? - correct answer -Ensures the equipment and
materials used to perform NDT tests are calibrated, legal, and will provide an acceptable level of
performance.
Penetrants are designed to: - correct answer -Remain fluid so it can be drawn back to the surface of the
part
The skills and qualifications associated with NDT/NDE are only applicable to the aviation industry. -
correct answer -False
The most important step in any penetrant type inspection is: - correct answer -Part preparation and
cleaning
The benefits of buying summaries with Stuvia:
Guaranteed quality through customer reviews
Stuvia customers have reviewed more than 700,000 summaries. This how you know that you are buying the best documents.
Quick and easy check-out
You can quickly pay through credit card or Stuvia-credit for the summaries. There is no membership needed.
Focus on what matters
Your fellow students write the study notes themselves, which is why the documents are always reliable and up-to-date. This ensures you quickly get to the core!
Frequently asked questions
What do I get when I buy this document?
You get a PDF, available immediately after your purchase. The purchased document is accessible anytime, anywhere and indefinitely through your profile.
Satisfaction guarantee: how does it work?
Our satisfaction guarantee ensures that you always find a study document that suits you well. You fill out a form, and our customer service team takes care of the rest.
Who am I buying these notes from?
Stuvia is a marketplace, so you are not buying this document from us, but from seller Lectphilip. Stuvia facilitates payment to the seller.
Will I be stuck with a subscription?
No, you only buy these notes for $14.49. You're not tied to anything after your purchase.
Can Stuvia be trusted?
4.6 stars on Google & Trustpilot (+1000 reviews)
81989 documents were sold in the last 30 days
Founded in 2010, the go-to place to buy study notes for 14 years now