LP Gas Master Qualifier: Dispensing Installation & Maintenance Updated Question and Answers [100% Correct] 2024/2025
3 views 0 purchase
Course
Lp gas qualifier
Institution
Lp Gas Qualifier
LP Gas Master Qualifier: Dispensing
Installation & Maintenance Updated
Question and Answers [100% Correct]
2024/2025
What is the minimum clearance required between an LP gas dispensing device and any building
opening?
A. 3 feet
B. 5 feet
C. 7 feet
D. 9 feet
Which of the ...
LP Gas Master Qualifier: Dispensing
Installation & Maintenance Updated
Question and Answers [100% Correct]
2024/2025
What is the minimum clearance required between an LP gas dispensing device and any building
opening?
A. 3 feet
B. 5 feet
C. 7 feet
D. 9 feet
Which of the following is a primary factor in determining the tank placement in an LP gas dispensing
installation?
A. Amount of available sunlight
B. Proximity to gas lines
C. Distance from ignition sources
D. Tank size
During a maintenance inspection of a gas dispensing system, which component should be checked for
visible wear or damage first?
A. Pressure relief valve
B. Gas gauge
C. Hoses and fittings
D. Tank base
Which type of gauge is typically used to measure the pressure within an LP gas cylinder?
A. Pressure gauge
B. Barometer
1
, C. Altimeter
D. Flow meter
When connecting an LP gas dispenser to a storage tank, which part of the installation should be properly
grounded?
A. Cylinder valve
B. Safety interlock
C. Gas line connector
D. Dispenser frame
What is the main reason for keeping LP gas tanks out of direct sunlight during storage?
A. To prevent gas expansion
B. To avoid increased internal pressure
C. To reduce leakage
D. To minimize rust formation
In an LP gas dispensing installation, what action is required if a hose connection is found leaking?
A. Replace the hose
B. Apply additional sealant
C. Tighten the connector
D. Perform a pressure test
What should be checked during an annual inspection of LP gas dispensing equipment?
A. Pipe size and layout
B. Pressure relief valve function
C. Gas flow rate
D. Cylinder markings
Why is it important to close the LP gas cylinder valve before disconnecting the dispenser?
2
The benefits of buying summaries with Stuvia:
Guaranteed quality through customer reviews
Stuvia customers have reviewed more than 700,000 summaries. This how you know that you are buying the best documents.
Quick and easy check-out
You can quickly pay through credit card or Stuvia-credit for the summaries. There is no membership needed.
Focus on what matters
Your fellow students write the study notes themselves, which is why the documents are always reliable and up-to-date. This ensures you quickly get to the core!
Frequently asked questions
What do I get when I buy this document?
You get a PDF, available immediately after your purchase. The purchased document is accessible anytime, anywhere and indefinitely through your profile.
Satisfaction guarantee: how does it work?
Our satisfaction guarantee ensures that you always find a study document that suits you well. You fill out a form, and our customer service team takes care of the rest.
Who am I buying these notes from?
Stuvia is a marketplace, so you are not buying this document from us, but from seller StellarGrades. Stuvia facilitates payment to the seller.
Will I be stuck with a subscription?
No, you only buy these notes for $9.66. You're not tied to anything after your purchase.
