100% satisfaction guarantee Immediately available after payment Both online and in PDF No strings attached
logo-home
JOURNEYMAN LINEMAN EXAM AND PRACTICE EXAM NEWEST ACTUAL EXAM COMPLETE 260 QUESTIONS AND CORRECT DETAILED ANSWERS (VERIFIED ANSWERS) |ALREADY GRADED A+ 1/4" - ANSW..Threads of drainage fittings shall be tapped as to allow _____ pitch per foot $18.49   Add to cart

Exam (elaborations)

JOURNEYMAN LINEMAN EXAM AND PRACTICE EXAM NEWEST ACTUAL EXAM COMPLETE 260 QUESTIONS AND CORRECT DETAILED ANSWERS (VERIFIED ANSWERS) |ALREADY GRADED A+ 1/4" - ANSW..Threads of drainage fittings shall be tapped as to allow _____ pitch per foot

 5 views  0 purchase
  • Course
  • JOURNEYMAN LINEMAN
  • Institution
  • JOURNEYMAN LINEMAN

JOURNEYMAN LINEMAN EXAM AND PRACTICE EXAM NEWEST ACTUAL EXAM COMPLETE 260 QUESTIONS AND CORRECT DETAILED ANSWERS (VERIFIED ANSWERS) |ALREADY GRADED A+ 1/4" - ANSW..Threads of drainage fittings shall be tapped as to allow _____ pitch per foot

Preview 4 out of 40  pages

  • October 23, 2024
  • 40
  • 2024/2025
  • Exam (elaborations)
  • Questions & answers
  • JOURNEYMAN LINEMAN
  • JOURNEYMAN LINEMAN
avatar-seller
DRWAILS
JOURNEYMAN LINEMAN EXAM AND PRACTICE
EXAM NEWEST ACTUAL EXAM COMPLETE 260
QUESTIONS AND CORRECT DETAILED ANSWERS
(VERIFIED ANSWERS) |ALREADY GRADED A+




1/4" - ✔✔ANSW✔✔..Threads of drainage fittings shall
be tapped as to allow _____ pitch per foot

4 lbs - ✔✔ANSW✔✔..Lead used for safe pans shall not
be less than ________ per square foot

When a trap is at risk of losing its seal doe to
SAMOBECLP - ✔✔ANSW✔✔..When are trap primers
required?

Must be vented to prevent back pressure on the inlet side,
and must have a readily accessible cleanout. -
✔✔ANSW✔✔..The AHJ has approved the plumber to
install building trap. What are the two requirements to be
met when installing the building trap?

6" - ✔✔ANSW✔✔..Interceptors for sand are required to
have a water seal not less than ____________.

,When a fixture is draining grease or some other substance
that is hazardous to the sanitary sewer. -
✔✔ANSW✔✔..When are grease interceptors required?

individually trapped and vented - ✔✔ANSW✔✔..Each
fixture discharging into a grease interceptor shall be
_______________ and ________________?

food particles will cause blockages in the line -
✔✔ANSW✔✔..Why is it not legal for a food waste
disposal system to discharge into a grease interceptor?

Flotation, Sedimentation, Neutralization -
✔✔ANSW✔✔..What are the three methods for
intercepting and treating wastes?

Vented flow control - ✔✔ANSW✔✔..Plumbing fixtures
or equipment must discharge through an approved type of
___________ before connecting to a hydromechanical
grease interceptor.

125 - ✔✔ANSW✔✔..A hydromechanical grease
interceptor is rated for 50 gallons per minute. What is the
total capacity in gallons of fixtures discharging into the
interceptor allowed by code?

,2 1/2 - ✔✔ANSW✔✔..The total capacity in gallons of
fixtures discharging into a hydromechanical interceptor
shall not exceed ___________ times the certified gym
flow rate of the interceptor.

a vent - ✔✔ANSW✔✔..What is required to be installed
downstream of a hydromechanical grease interceptor

- ✔✔ANSW✔✔..Size a hydromechanical interceptor for
a two compartment pot sink.

1.6 gal - ✔✔ANSW✔✔..What is the maximum number
of gallons per flush allowed by code for a water closet.

1 gal - ✔✔ANSW✔✔..What is the maximum number of
gallons per flush allowed by code for a urinal?

.26 - ✔✔ANSW✔✔..Metered faucets shall deliver a
maximum of ______ gallons of water per use.

house side - ✔✔ANSW✔✔..The overflow pipe from a
fixture shall connect to the _____________ of the fixture
trap.

, tail piece - ✔✔ANSW✔✔..Strainers serving shower
drains shall have a water way equivalent to the area of the
__________

20 - ✔✔ANSW✔✔..A continuous was made from
seamless drawn brass shall be not less than ______ B & S
Gauge.


Copper Tube, Cast Iron, Stainless steel, ABS, PVC DWV
- ✔✔ANSW✔✔..Name 3 allowable materials for the
DWV system "underground"

1-1/4" - 1 dfu's
1-1/2" - 3 dfu's
2" - 4 dfu's
3" 6 dfu's
4" - dfu's - ✔✔ANSW✔✔..What are the fixture unit
values for the following traps

Double fixture fitting - ✔✔ANSW✔✔..What type of
fitting is used for continuous waste and venting of
lavatories back to back?

1" - ✔✔ANSW✔✔..Caulk joints for cast iron bell and
spigot shall be filled with molten lead to a depth of not
less than ________?

The benefits of buying summaries with Stuvia:

Guaranteed quality through customer reviews

Guaranteed quality through customer reviews

Stuvia customers have reviewed more than 700,000 summaries. This how you know that you are buying the best documents.

Quick and easy check-out

Quick and easy check-out

You can quickly pay through credit card or Stuvia-credit for the summaries. There is no membership needed.

Focus on what matters

Focus on what matters

Your fellow students write the study notes themselves, which is why the documents are always reliable and up-to-date. This ensures you quickly get to the core!

Frequently asked questions

What do I get when I buy this document?

You get a PDF, available immediately after your purchase. The purchased document is accessible anytime, anywhere and indefinitely through your profile.

Satisfaction guarantee: how does it work?

Our satisfaction guarantee ensures that you always find a study document that suits you well. You fill out a form, and our customer service team takes care of the rest.

Who am I buying these notes from?

Stuvia is a marketplace, so you are not buying this document from us, but from seller DRWAILS. Stuvia facilitates payment to the seller.

Will I be stuck with a subscription?

No, you only buy these notes for $18.49. You're not tied to anything after your purchase.

Can Stuvia be trusted?

4.6 stars on Google & Trustpilot (+1000 reviews)

80796 documents were sold in the last 30 days

Founded in 2010, the go-to place to buy study notes for 14 years now

Start selling
$18.49
  • (0)
  Add to cart