INIWIC EXAM 3 QUESTIONS AND
100% VERIFIED ANSWERS
What is the FN303's range on both area and point targets? - ANSWER 30-50
(Point), 50-100 (Area)
What is the FN303's calibre? - ANSWER 0.68
What is the rifling on the FN303? - ANSWER Smooth bore.
Does the FN303 fire from an open or closed bolt? - ANSWER Open bolt; this is
why you shouldn't put your fingers in the magazine well.
What is the magazine capacity of the FN303? - Answer: 15 rounds.
What types of projectiles does the FN303 use? - ANSWER Clear impact,
washable, permanent paint, pava powder (0.10% OC), and inert powder.
What is the shot capacity of the FN303 with a full bottle? - ANSWER: 110
shots average
Depending on the payload, the FN303 can do what? - ANSWER Marking,
immobilising, and denying access to certain areas.
What is the process for loading the FN303? - ANSWER 1: Point the firearm in
a safe direction.
2. Turn "off" the ¼ turn air valve. 3. Face the shooter with the magazine
transport cover.
4. Magazine's translucent cover features shooter
5. The projectile feed opening is at 12 o'clock.
6. Push the magazine firmly into the well until it clicks.
7. Pull down twice or three times to confirm the magazine is seated.
, When you arm the FN303, turn the 1/4 turn air valve and listen for this noise. -
Click to answer.
When attacking targets with the FN303, should the head and neck always be
avoided unless specifically authorised? - ANSWER Deadly force.
What are the initial steps for the FN303? - ANSWER Tap the magazine's base,
shake it from side to side, assess the situation, and engage the target again. If
this fails, try swapping magazines.
How does one load the FN303 with a speed loader? - ANSWER 1. Attach the
speed loader to the empty magazine until it clicks in place.
2. Unscrew the lid for the transport tube
3. With the transparent cover facing down, screw tube into the speed loader.
4. Invert the magazine assembly.
5. Use the finger grooves to turn the rotor anticlockwise until all pockets are
filled. 6. Remove the magazine from the speed loader.
What products should not be used to clean the FN303? - ANSWER Gun
solvents or wire brushes
What cleaning tools are approved for the FN303? - ANSWER The 12 gauge
nylon brush, nylon utility brush, pneumatic oil, and isopropyl alcohol.
When does the FN303 need lubrication? - ANSWER After 500 shots, add 4-6
drops of pneumatic oil.
When disassembling the FN303, what should never be removed? - ANSWER
Spring housing.
What is the authorised refill speed for the FN303's air canister? - ANSWER No
more than 200 PSI (15 BAR) every second.
Which types of targets provide input to the FN303? - ANSWER Dojo targets
How many magazines come with the FN303? - Answer three.
The benefits of buying summaries with Stuvia:
Guaranteed quality through customer reviews
Stuvia customers have reviewed more than 700,000 summaries. This how you know that you are buying the best documents.
Quick and easy check-out
You can quickly pay through credit card or Stuvia-credit for the summaries. There is no membership needed.
Focus on what matters
Your fellow students write the study notes themselves, which is why the documents are always reliable and up-to-date. This ensures you quickly get to the core!
Frequently asked questions
What do I get when I buy this document?
You get a PDF, available immediately after your purchase. The purchased document is accessible anytime, anywhere and indefinitely through your profile.
Satisfaction guarantee: how does it work?
Our satisfaction guarantee ensures that you always find a study document that suits you well. You fill out a form, and our customer service team takes care of the rest.
Who am I buying these notes from?
Stuvia is a marketplace, so you are not buying this document from us, but from seller luzlinkuz. Stuvia facilitates payment to the seller.
Will I be stuck with a subscription?
No, you only buy these notes for $11.99. You're not tied to anything after your purchase.