Exam (elaborations)
AMT 109 - RIGGING UNIT 1 TEST
- Course
- Institution
AMT 109 - RIGGING UNIT 1 TEST
[Show more]
Content preview
AMT 109 - RIGGING UNIT 1 TEST(8257)-The vast majority of aircraft control cables are terminated with swaged terminals,
that must be? - Answers-checked with a go-no-go gauge before and after, to show
compliance with the manufacturer's requirements after the swaging operation.
(8258)-What nondestructive checking method is normally used to ensure that the
correct amount of swaging has taken place when installing swaged-type terminals on
aircraft control cable? - Answers-Use a terminal gauge to check the diameter of the
swaged portion of the terminal.
(8259)-When inspecting a control cable turnbuckle for proper installation, determine
that? - Answers-the safety wire ends are wrapped a minimum of four turns around the
terminal end shanks.
(8268)-Placing a piece of cloth around a stainless steel control cable and running it back
and forth over the length of the cable is generally a satisfactory method of? - Answers-
inspecting for broken strands.
(8269)-The cable-operated control system of an all-metal aircraft, not incorporating a
temperature compensating device, has been rigged to the correct tension in a heated
hangar. If the aircraft is operated in very cold weather, the cable tension will? -
Answers-decrease when the aircraft structure and cables become cold.
(8270)-Very often, repairs to a control surface require static rebalancing of the control
surface. Generally, flight control balance condition may be determined by? - Answers-
the behavior of the trailing edge when the surface is suspended from its hinge points.
(8271)-Excessive wear on both of the sides of a control cable pulley groove is evidence
of? - Answers-pulley misalignment.
(8272)-Fairleads should never deflect the alignment of a cable more than? - Answers-
3°.
(8273)-Where does the breakage of control cable wires occur most frequently? -
Answers-Breakage usually occurs where cables pass over pulleys and through
fairleads.
(8260)-If all instructions issued by the swaging tool manufacturer are followed when
swaging a cable terminal, the resultant swaged terminal strength should be? - Answers-
the full rated strength of the cable.
(8265)-How are changes in direction of a control cable accomplished? - Answers-
Pulleys.
The benefits of buying summaries with Stuvia:
Guaranteed quality through customer reviews
Stuvia customers have reviewed more than 700,000 summaries. This how you know that you are buying the best documents.
Quick and easy check-out
You can quickly pay through credit card or Stuvia-credit for the summaries. There is no membership needed.
Focus on what matters
Your fellow students write the study notes themselves, which is why the documents are always reliable and up-to-date. This ensures you quickly get to the core!
Frequently asked questions
What do I get when I buy this document?
You get a PDF, available immediately after your purchase. The purchased document is accessible anytime, anywhere and indefinitely through your profile.
Satisfaction guarantee: how does it work?
Our satisfaction guarantee ensures that you always find a study document that suits you well. You fill out a form, and our customer service team takes care of the rest.
Who am I buying these notes from?
Stuvia is a marketplace, so you are not buying this document from us, but from seller GEEKA. Stuvia facilitates payment to the seller.
Will I be stuck with a subscription?
No, you only buy these notes for $10.09. You're not tied to anything after your purchase.
Can Stuvia be trusted?
4.6 stars on Google & Trustpilot (+1000 reviews)
77254 documents were sold in the last 30 days
Founded in 2010, the go-to place to buy study notes for 14 years now