Exam (elaborations)
Masonry ICC Study Exam Graded A+
- Course
- Institution
Masonry ICC Study Exam Graded A+
[Show more]
Content preview
Masonry ICC Study Exam Graded A+A common CMU size is 6" x 8" x 16". The 8" refers to the .....
A. Width
B. Height
C. Length - ANSWER-Answer. B. Height
A special inspector shall furnish inspection reports to who
A. The owner
B. The contractor
C. The building official/design professional
D. The fabricator - ANSWER-Answer C. The building official/design professiona
A standard hook can be a 180° turn plus an extension of at least ..... bar diameters, but
not less than ..... inches at the free end of the bar
A. 4,2.25
B. 4,2.5
C. 2.2.75
D. 2,3 - ANSWER-Answer B. 4bar diameters or 2.5 inches
A. 48 inches
B. 36 inches
C. 24 inches
D. 32 inches
Answer C. 24 inches - ANSWER-
According to a ASTM C 476, grout prepared at the jobsite shall be mixed for a minimum
of how many minutes.
A. 1 minute
B. 3 minutes
C. 5 minutes
D. 10 minutes - ANSWER-Answer C. 5 minutes
According to the IBC, the maximum amount of reinforcement for a CMU block in a wall
designed by the strength design method is what percent of the cell area
A. 3%
B. 4%
C. 5%
D. 7% - ANSWER-Answer B. 4%
, After sampling a CMU specimen for moisture content, the specimen should be...
A. Dried
B. Weighed
C. Bagged
D. Wetted - ANSWER-Answer B. Weighed
After the initial water has been introduced to the mix, mortar should be used within .....
A. 30 minutes
B. 1 hour
C. 1-1/2 hour
D. 2-1/2 hour - ANSWER-Answer D. 2-1/2 hour
Bars splices by non-contact lap splices shall not be spaced transversely farther apart
than ..... the required length of lap nor more than ..... inches
A. 1/5th or 8 inches
B. 1/8th or 8 inches
C. 1/4th or 4 inches
D. 3/8ths or 12 inches - ANSWER-Answer A. 1/5th or 8 inches
Control joints are considered joints that will ..... shortening, shrinkage and/or reduction
in the length of the wall.
A. Coordinate
B. Accommodate
C. Reduce
D. Control - ANSWER-Answer B. Accommodate
Control joints are for the purpose of......
A. Allowing concrete block to expand
B. Allowing the block to shrink without widespread cracking
C. Strengthening walls
D. Weakening walls - ANSWER-Answer B. Allowing the block to shrink without
widespread cracking
Control joints must be...... With structural anchoring requirements of intersection walls.
A. Independent
B. Anchored
C. Coordinated
D. Separated - ANSWER-Answer C. Coordinated
The benefits of buying summaries with Stuvia:
Guaranteed quality through customer reviews
Stuvia customers have reviewed more than 700,000 summaries. This how you know that you are buying the best documents.
Quick and easy check-out
You can quickly pay through credit card or Stuvia-credit for the summaries. There is no membership needed.
Focus on what matters
Your fellow students write the study notes themselves, which is why the documents are always reliable and up-to-date. This ensures you quickly get to the core!
Frequently asked questions
What do I get when I buy this document?
You get a PDF, available immediately after your purchase. The purchased document is accessible anytime, anywhere and indefinitely through your profile.
Satisfaction guarantee: how does it work?
Our satisfaction guarantee ensures that you always find a study document that suits you well. You fill out a form, and our customer service team takes care of the rest.
Who am I buying these notes from?
Stuvia is a marketplace, so you are not buying this document from us, but from seller CLOUND. Stuvia facilitates payment to the seller.
Will I be stuck with a subscription?
No, you only buy these notes for $11.49. You're not tied to anything after your purchase.
Can Stuvia be trusted?
4.6 stars on Google & Trustpilot (+1000 reviews)
75632 documents were sold in the last 30 days
Founded in 2010, the go-to place to buy study notes for 14 years now