IPC-A-610 -Chapter 7 - Through-Hole Technology-Qs & As
10 views 0 purchase
Course
IPC-A-610
Institution
IPC-A-610
IPC-A-610 -Chapter 7 - Through-Hole Technology-Qs &
As
Component Mounting - Lead Forming - Damage
Defect - Class 1,2,3 Correct Ans-Heavy indentations such as serrated pliers mark
IPC-A-610 -Chapter 7 - Through-Hole Technology-Qs &
As
Component Mounting - Lead Forming - Damage
Defect - Class 1,2,3 Correct Ans-Heavy indentations such as serrated pliers mark
Component Mounting - Leads Crossing Conductors
Acceptable - Class 1,2,3 Correct Ans-- Sleeve does not interfere with formation of the
required solder connection
- Sleeve covers area of protection designated
Component Mounting - Leads Crossing Conductors
Not Established - Class 1
Defect - Class 2,3 Correct Ans-Splitting and/or unraveling of sleeving
Component Mounting - Leads Crossing Conductors
Defect - Class 2,3 Correct Ans-A component lead crossing an electrically noncommon
conductor violates minimum electrical clearance
Component Mounting - Hole Obstruction
Process Indicator - Class 2
Defect - Class 3 Correct Ans-Parts and components obstruct solder flow onto the primary
side (solder destination side) lands of plated through-holes required to be soldered
, IPC-A-610 -Chapter 7 - Through-Hole Technology-Qs &
As
Component Mounting - DIP/SIP Devices and Sockets
Acceptable - Class 1,2,3 Correct Ans-Amount of tilt is limited by minimum lead protrusion
and height requirements
Component Mounting - DIP/SIP Devices and Sockets
Defect - Class 1,2,3 Correct Ans-- Tilt of the component exceeds maximum component
height limits
- Lead protrusion does not meet acceptance requirements due to tilt of component
Component Mounting - Radial Leads - Vertical
Acceptable - Class 1,2,3 Correct Ans-Component tilt does not violate minimum electrical
clearance
, IPC-A-610 -Chapter 7 - Through-Hole Technology-Qs &
As
Component Mounting - Radial Leads - Horizontal
Acceptable - Class 1,2,3 Correct Ans-Component in contact with board on at least one side
and/or surface
Through-Hole Technology Correct Ans-- The placement of any component on the electronic
assembly does not prevent the insertion or removal of any hardware (tool clearance included)
used to mount the assembly
- Bonding material is sufficient to hold the part but does not encapsulate and cover
component identification
Connection Mounting - Orientation Correct Ans-Inspection usually starts with a general
overall view of the electronic assembly, then follows each component/wire to its connection,
concentrating on the lead into the connection, the connection and the tail end of the
lead/wire leaving the connection. The wire/lead protrusion step for all lands should be saved
for last so that the board can be flipped over and all connections checked together.
*Component Mounting - Orientation - Horizontal
Target - Class 1,2,3 Correct Ans-Nonpolarized components are oriented so that markings
are read the same way (left-to-right or top-to-bottom)
Component Mounting - Orientation - Vertical
Acceptable - Class 1,2,3 Correct Ans-- Polarized part is mounted with a long ground lead
The benefits of buying summaries with Stuvia:
Guaranteed quality through customer reviews
Stuvia customers have reviewed more than 700,000 summaries. This how you know that you are buying the best documents.
Quick and easy check-out
You can quickly pay through credit card or Stuvia-credit for the summaries. There is no membership needed.
Focus on what matters
Your fellow students write the study notes themselves, which is why the documents are always reliable and up-to-date. This ensures you quickly get to the core!
Frequently asked questions
What do I get when I buy this document?
You get a PDF, available immediately after your purchase. The purchased document is accessible anytime, anywhere and indefinitely through your profile.
Satisfaction guarantee: how does it work?
Our satisfaction guarantee ensures that you always find a study document that suits you well. You fill out a form, and our customer service team takes care of the rest.
Who am I buying these notes from?
Stuvia is a marketplace, so you are not buying this document from us, but from seller GOLDTUTORS. Stuvia facilitates payment to the seller.
Will I be stuck with a subscription?
No, you only buy these notes for $12.99. You're not tied to anything after your purchase.
