100% satisfaction guarantee Immediately available after payment Both online and in PDF No strings attached
logo-home
Fluoroscopy Study Questions with Correct Answers $13.49   Add to cart

Exam (elaborations)

Fluoroscopy Study Questions with Correct Answers

 5 views  0 purchase
  • Course
  • Fluoroscopy
  • Institution
  • Fluoroscopy

Fluoroscopy Study Questions with Correct Answers Which comes first in image intensified fluoroscopy - Answer- Cesium Iodide screen If the radiologist out worked with requested a TV image with sharp detail, what type of TV camera would you recommend purchasing - Answer- Vidicon Which componen...

[Show more]

Preview 2 out of 5  pages

  • October 1, 2024
  • 5
  • 2024/2025
  • Exam (elaborations)
  • Questions & answers
  • fluoroscopy
  • Fluoroscopy
  • Fluoroscopy
avatar-seller
Scholarsstudyguide
Fluoroscopy Study Questions with
Correct Answers
Which comes first in image intensified fluoroscopy - Answer- Cesium Iodide screen

If the radiologist out worked with requested a TV image with sharp detail, what type of
TV camera would you recommend purchasing - Answer- Vidicon

Which component of the television monitor transfers the video signal into a visible
image - Answer- Fluorescent screen

How is the electron beam in a television camera tube produced - Answer- Thermionic
emission

When using a 25/17/12 image intensifier tube, which of the following is true? - Answer-
The field of view is largest in the 25 cm mode

When using a multi-focus image intensifier tube in the magnification mode - Answer-
Resolution is improved

What happens when a multi-focus image intensifier tube is operated in the magnification
mode - Answer- The focal point is closer to the input screen

Automatic brightness control is designed to compensate for changes in which of the
following? - Answer- Patient body habitus

The single function of an AEC is to eliminate the need for the radiographer to set an -
Answer- Exposure time

The backup time should be set at ___________ percent of the anticipated manual
exposure time - Answer- 150

During fluoroscopy the SOD on a fixed unit cannot be less than - Answer- 15 inches

Electrostatic lenses are used to accelerate and focus - Answer- Electrons

All of the following are common post-processing features with digital fluoroscopy
EXCEPT - Answer- Last image hold

During fluoroscopy the principal source of radiation exposure to personnel in the room is
the - Answer- Patient

, When using automatic brightness control it is important to remember that - Answer- A
dark video image indicates photon starvation to the receptor

__________ fluoroscopy is when the radiologist periodically activates the x-ray beam
instead of using a continuous beam which reduces the exposure to the patient -
Answer- Intermittent

21 CFR states that fluoroscopic equipment manufactured after 2006 shall display -
Answer- Air kerma rate, cumulative air kerma, and updated every 5 seconds

Flat panel digital detectors used for fluoroscopy use - Answer- Amorphous silicon,
cesium iodide scintillator, Tft technology

In a fluoroscopy system the X-ray tube and image receptor must be interlocked in order
to enable fluoro. This classifies the image receptor as the - Answer- Primary barrier

Mobile fluoroscopic systems are different from fixed systems in that they - Answer-
Have minimum SOD of 12 inches

All of the following are true of the fluoroscopic lead apron drape EXCEPT - Answer- It
covers the Bucky slot in the table

Radiographers should move __________ away from the patient prior to making an
exposure - Answer- 2 yards

During mobile radiography the radiographer must achieve maximum distance primarily
from the - Answer- Patient

If a chest radiograph requires 4 mAs at 72", the new mAs to use at 56" would be -
Answer- 2.4

____________ is the measurement of the increase in light photons due to the
conversion efficiency of the output screen - Answer- Flux gain

Which of the following describes the fluoroscopic system designed to maintain a
constant image brightness - Answer- Automatic brightness control (ABC)


Fluoroscopy mA range is - Answer- 0.5-5.0

During fluoroscopy the SOD cannot be less than how many inches on a mobile unit -
Answer- 12

The input screen absorbs ______________ and emits _______________ - Answer- X-
ray photons, light photons

Electrostatic lenses are used to accelerate and focus - Answer- Electrons

The benefits of buying summaries with Stuvia:

Guaranteed quality through customer reviews

Guaranteed quality through customer reviews

Stuvia customers have reviewed more than 700,000 summaries. This how you know that you are buying the best documents.

Quick and easy check-out

Quick and easy check-out

You can quickly pay through credit card or Stuvia-credit for the summaries. There is no membership needed.

Focus on what matters

Focus on what matters

Your fellow students write the study notes themselves, which is why the documents are always reliable and up-to-date. This ensures you quickly get to the core!

Frequently asked questions

What do I get when I buy this document?

You get a PDF, available immediately after your purchase. The purchased document is accessible anytime, anywhere and indefinitely through your profile.

Satisfaction guarantee: how does it work?

Our satisfaction guarantee ensures that you always find a study document that suits you well. You fill out a form, and our customer service team takes care of the rest.

Who am I buying these notes from?

Stuvia is a marketplace, so you are not buying this document from us, but from seller Scholarsstudyguide. Stuvia facilitates payment to the seller.

Will I be stuck with a subscription?

No, you only buy these notes for $13.49. You're not tied to anything after your purchase.

Can Stuvia be trusted?

4.6 stars on Google & Trustpilot (+1000 reviews)

75759 documents were sold in the last 30 days

Founded in 2010, the go-to place to buy study notes for 14 years now

Start selling
$13.49
  • (0)
  Add to cart