WatchGuard Secure Wi-Fi Essentials with WatchGuard Cloud Exam Questions Complete Solutions Current Update (A+ Pass)
8 views 0 purchase
Course
WatchGuard
Institution
WatchGuard
WatchGuard Secure Wi-Fi Essentials with WatchGuard Cloud Exam Questions Complete Solutions Current Update (A+ Pass)
Which of these wireless modes are supported on the 5 GHz radio band? (Select two.)
a. 802.11a and 802.11n
b. 802.11b and 802.11g
c. 802.11x
d. 802.11ac - Answers -ad
Wha...
WatchGuard Secure Wi-Fi Essentials with
WatchGuard Cloud Exam Questions
Complete Solutions Current Update (A+
Pass)
Which of these wireless modes are supported on the 5 GHz radio band? (Select two.)
a. 802.11a and 802.11n
b. 802.11b and 802.11g
c. 802.11x
d. 802.11ac - Answers -ad
What action must you perform before you can manage an AP with a Firebox? (Select
one.)
a. Configure the AP radios for the 2.4 and 5 GHz bands
b. Create an SSID to broadcast
c. Pair the AP with the Gateway Wireless Controller
d. Reset the AP to factory-default settings - Answers -c
It is a best practice to place APs near walls, corners, and metal objects to boost the
signal distance.
a. True
b. False - Answers -b
Which tool can you use on the Gateway Wireless Controller to check for channel
conflicts on your wireless network? (Select one.)
a. Access points tab on the Dashboard
b. Auto-deployment configuration
c. Rogue AP detection
d. Wireless maps - Answers -d
In Wi-Fi Cloud Manage, which of these Monitoring pages shows WIPS classifications for
clients? (Select one.)
a. Monitoring > Managed Devices
b. Monitoring > Security > Clients
c. Monitoring > Wi-Fi > Clients
d. Monitoring > Applications - Answers -b
In Wi-Fi Cloud, where do you set the security mode and encryption type for a wireless
network? (Select one.)
a. Device template
b. Authorized WLAN Policy
c. Security profile d. SSID profile - Answers -d
,In Wi-Fi Cloud, Device Templates applied to a location are inherited by location sub-
folders.
a. True
b. False - Answers -b
Which of these AP WIPS classifications refers to an device outside your network?
(Select one.)
a. External
b. Authorized
c. Rogue
d. Uncategorized - Answers -a
Which Wi-Fi Cloud application do you use to create captive portal splash pages?
(Select one.)
a. Discover
b. Engage
c. Go
d. Manage
e. Analyze - Answers -b
In Wi-Fi Cloud, what is the third-radio used for on tri-radio APs? (Select one.)
a. Additional 5 GHz radio
b. Captive portal
c. WIPS Sensor
d. Guest SSID Broadcast - Answers -c
What functionality do Firebox and XTM wireless devices have - Answers -•One built-in
radio supports up to three SSIDs
•Can be configured to use wireless for external (as a wireless client)
•Each wireless access point or client is configured as a network interface
When two AP devices paired to the same Firebox use the same SSID, what controls
wireless roaming behavior for wireless clients? (Select one.)
a. The Gateway Wireless Controller on the Firebox
b. The two AP devices
c. The wireless clients - Answers -c. Roaming behavior is controlled by the wireless
clients, not the AP devices or the Gateway Wireless Controller
What functionality do both Firebox - XTM wireless devices and WatchGuard AP devices
share - Answers -Support 2.4 GHz and 5 GHz, 802.11a/b/g/n (802.11ac for T30-W,
T50-W, AP300)
Managed by WatchGuard System Manager, Fireware XTM Web UI, or CLI
,Name the Firebox and XTM devices with built-in wireless - Answers -Firebox T10-W,
T30-W, T50-W
XTM 25-W, XTM 26-W, XTM 33-W
Which of these options can you configure in the hotspot connection settings? (Select
three.)
a. Allow hotspot users to connect without credentials.
b. Allow hotspot users to connect without accepting Terms and Conditions.
c. Require hotspot users to authenticate with a user name and passphrase.
d. Require hotspot users to authenticate with only a passphrase.
e. Require users to authenticate with a VPN client. - Answers -a, c, d. There are no
options to skip the Terms and Conditions or require a VPN client
Which passphrase does the Gateway Wireless Controller use to connect to a paired
WatchGuard AP device? (Select one.)
a. WPA/WPA2 (PSK) passphrase
b. Firebox configuration passphrase
c. Pairing passphrase
d. WatchGuard AP passphrase - Answers -d. The Gateway Wireless Controller uses the
WatchGuard AP passphrase to connect to all paired AP devices
If you enable VLAN tagging in an SSID, you must also enable management VLAN
tagging in the Gateway Wireless Controller settings.
a. True
b. False - Answers -b. (False) You can optionally enable management VLAN tagging,
but it is not required.
What happens if you configure an access point to support more than one mode -
Answers -Overall radio performance can decrease
Are management frames sent at the lowest or highest rate Sent at the lowest rate
supported by connected clients
Which of these wireless modes are supported on the 5 GHz radio band? (Select two.)
a. 802.11a
b. 802.11b
c. 802.11g
d. 802.11n - Answers -a, d. The 5 GHz radio band supports 802.11a and 802.11n
wireless modes
When two AP devices paired to the same Firebox use the same SSID, what controls
wireless roaming behavior for wireless clients? (Select one.)
, a. The Gateway Wireless Controller on the Firebox
b. The two AP devices
c. The wireless clients - Answers -c. Roaming behavior is controlled by the wireless
clients, not the AP devices or the Gateway Wireless Controller
If you enable VLAN tagging in an SSID, you must also enable management VLAN
tagging in the Gateway Wireless Controller settings.
a. True
b. False - Answers -b. (False) You can optionally enable management VLAN tagging,
but it is not required.
Which passphrase does the Gateway Wireless Controller use to connect to a paired
WatchGuard AP device? (Select one.)
a. WPA/WPA2 (PSK) passphrase
b. Firebox configuration passphrase
c. Pairing passphrase
d. WatchGuard AP passphrase - Answers -d. The Gateway Wireless Controller uses the
WatchGuard AP passphrase to connect to all paired AP devices
Which of these options can you configure in the hotspot connection settings? (Select
three.)
a. Allow hotspot users to connect without credentials.
b. Allow hotspot users to connect without accepting Terms and Conditions.
c. Require hotspot users to authenticate with a user name and passphrase.
d. Require hotspot users to authenticate with only a passphrase.
e. Require users to authenticate with a VPN client. - Answers -a, c, d. There are no
options to skip the Terms and Conditions or require a VPN client
Name the two types of WatchGuard wireless devices - Answers -1: Firebox and XTM
devices with built-in wireless access points
2: WatchGuard AP devices
Name the WatchGuard AP devices - Answers -AP100, AP200, AP300 - indoor
AP102 - indoor/outdoor
Name the Firebox and XTM devices with built-in wireless - Answers -Firebox T10-W,
T30-W, T50-W
XTM 25-W, XTM 26-W, XTM 33-W
The benefits of buying summaries with Stuvia:
Guaranteed quality through customer reviews
Stuvia customers have reviewed more than 700,000 summaries. This how you know that you are buying the best documents.
Quick and easy check-out
You can quickly pay through credit card or Stuvia-credit for the summaries. There is no membership needed.
Focus on what matters
Your fellow students write the study notes themselves, which is why the documents are always reliable and up-to-date. This ensures you quickly get to the core!
Frequently asked questions
What do I get when I buy this document?
You get a PDF, available immediately after your purchase. The purchased document is accessible anytime, anywhere and indefinitely through your profile.
Satisfaction guarantee: how does it work?
Our satisfaction guarantee ensures that you always find a study document that suits you well. You fill out a form, and our customer service team takes care of the rest.
Who am I buying these notes from?
Stuvia is a marketplace, so you are not buying this document from us, but from seller Stuviaascorers. Stuvia facilitates payment to the seller.
Will I be stuck with a subscription?
No, you only buy these notes for $12.99. You're not tied to anything after your purchase.
