Exam (elaborations)
WatchGuard Secure Wi-Fi Essentials with WatchGuard Cloud Exam Questions and Answers
- Course
- Institution
WatchGuard Secure Wi-Fi Essentials with WatchGuard Cloud Exam
[Show more]
Content preview
WatchGuard Secure Wi-Fi Essentialswith WatchGuard Cloud Exam
Which of these wireless modes are supported on the 5 GHz radio band? (Select two.)
a. 802.11a and 802.11n
b. 802.11b and 802.11g
c. 802.11x
d. 802.11ac - Correct Answers -ad
What action must you perform before you can manage an AP with a Firebox? (Select
one.)
a. Configure the AP radios for the 2.4 and 5 GHz bands
b. Create an SSID to broadcast
c. Pair the AP with the Gateway Wireless Controller
d. Reset the AP to factory-default settings - Correct Answers -c
It is a best practice to place APs near walls, corners, and metal objects to boost the
signal distance.
a. True
b. False - Correct Answers -b
Which tool can you use on the Gateway Wireless Controller to check for channel
conflicts on your wireless network? (Select one.)
a. Access points tab on the Dashboard
b. Auto-deployment configuration
c. Rogue AP detection
d. Wireless maps - Correct Answers -d
In Wi-Fi Cloud Manage, which of these Monitoring pages shows WIPS classifications for
clients? (Select one.)
a. Monitoring > Managed Devices
b. Monitoring > Security > Clients
c. Monitoring > Wi-Fi > Clients
d. Monitoring > Applications - Correct Answers -b
In Wi-Fi Cloud, where do you set the security mode and encryption type for a wireless
network? (Select one.)
,a. Device template
b. Authorized WLAN Policy
c. Security profile d. SSID profile - Correct Answers -d
In Wi-Fi Cloud, Device Templates applied to a location are inherited by location sub-
folders.
a. True
b. False - Correct Answers -b
Which of these AP WIPS classifications refers to an device outside your network?
(Select one.)
a. External
b. Authorized
c. Rogue
d. Uncategorized - Correct Answers -a
Which Wi-Fi Cloud application do you use to create captive portal splash pages?
(Select one.)
a. Discover
b. Engage
c. Go
d. Manage
e. Analyze - Correct Answers -b
In Wi-Fi Cloud, what is the third-radio used for on tri-radio APs? (Select one.)
a. Additional 5 GHz radio
b. Captive portal
c. WIPS Sensor
d. Guest SSID Broadcast - Correct Answers -c
What functionality do Firebox and XTM wireless devices have - Correct Answers -•One
built-in radio supports up to three SSIDs
•Can be configured to use wireless for external (as a wireless client)
•Each wireless access point or client is configured as a network interface
When two AP devices paired to the same Firebox use the same SSID, what controls
wireless roaming behavior for wireless clients? (Select one.)
a. The Gateway Wireless Controller on the Firebox
b. The two AP devices
c. The wireless clients - Correct Answers -c. Roaming behavior is controlled by the
wireless clients, not the AP devices or the Gateway Wireless Controller
,What functionality do both Firebox - XTM wireless devices and WatchGuard AP devices
share - Correct Answers -Support 2.4 GHz and 5 GHz, 802.11a/b/g/n (802.11ac for
T30-W, T50-W, AP300)
Managed by WatchGuard System Manager, Fireware XTM Web UI, or CLI
Name the Firebox and XTM devices with built-in wireless - Correct Answers -Firebox
T10-W, T30-W, T50-W
XTM 25-W, XTM 26-W, XTM 33-W
Which of these options can you configure in the hotspot connection settings? (Select
three.)
a. Allow hotspot users to connect without credentials.
b. Allow hotspot users to connect without accepting Terms and Conditions.
c. Require hotspot users to authenticate with a user name and passphrase.
d. Require hotspot users to authenticate with only a passphrase.
e. Require users to authenticate with a VPN client. - Correct Answers -a, c, d. There are
no options to skip the Terms and Conditions or require a VPN client
Which passphrase does the Gateway Wireless Controller use to connect to a paired
WatchGuard AP device? (Select one.)
a. WPA/WPA2 (PSK) passphrase
b. Firebox configuration passphrase
c. Pairing passphrase
d. WatchGuard AP passphrase - Correct Answers -d. The Gateway Wireless Controller
uses the WatchGuard AP passphrase to connect to all paired AP devices
If you enable VLAN tagging in an SSID, you must also enable management VLAN
tagging in the Gateway Wireless Controller settings.
a. True
b. False - Correct Answers -b. (False) You can optionally enable management VLAN
tagging, but it is not required.
What happens if you configure an access point to support more than one mode -
Correct Answers -Overall radio performance can decrease
Are management frames sent at the lowest or highest rate Sent at the lowest rate
supported by connected clients
Which of these wireless modes are supported on the 5 GHz radio band? (Select two.)
a. 802.11a
b. 802.11b
c. 802.11g
, d. 802.11n - Correct Answers -a, d. The 5 GHz radio band supports 802.11a and
802.11n wireless modes
When two AP devices paired to the same Firebox use the same SSID, what controls
wireless roaming behavior for wireless clients? (Select one.)
a. The Gateway Wireless Controller on the Firebox
b. The two AP devices
c. The wireless clients - Correct Answers -c. Roaming behavior is controlled by the
wireless clients, not the AP devices or the Gateway Wireless Controller
If you enable VLAN tagging in an SSID, you must also enable management VLAN
tagging in the Gateway Wireless Controller settings.
a. True
b. False - Correct Answers -b. (False) You can optionally enable management VLAN
tagging, but it is not required.
Which passphrase does the Gateway Wireless Controller use to connect to a paired
WatchGuard AP device? (Select one.)
a. WPA/WPA2 (PSK) passphrase
b. Firebox configuration passphrase
c. Pairing passphrase
d. WatchGuard AP passphrase - Correct Answers -d. The Gateway Wireless Controller
uses the WatchGuard AP passphrase to connect to all paired AP devices
Which of these options can you configure in the hotspot connection settings? (Select
three.)
a. Allow hotspot users to connect without credentials.
b. Allow hotspot users to connect without accepting Terms and Conditions.
c. Require hotspot users to authenticate with a user name and passphrase.
d. Require hotspot users to authenticate with only a passphrase.
e. Require users to authenticate with a VPN client. - Correct Answers -a, c, d. There are
no options to skip the Terms and Conditions or require a VPN client
Name the two types of WatchGuard wireless devices - Correct Answers -1: Firebox and
XTM devices with built-in wireless access points
2: WatchGuard AP devices
Name the WatchGuard AP devices - Correct Answers -AP100, AP200, AP300 - indoor
The benefits of buying summaries with Stuvia:
Guaranteed quality through customer reviews
Stuvia customers have reviewed more than 700,000 summaries. This how you know that you are buying the best documents.
Quick and easy check-out
You can quickly pay through credit card or Stuvia-credit for the summaries. There is no membership needed.
Focus on what matters
Your fellow students write the study notes themselves, which is why the documents are always reliable and up-to-date. This ensures you quickly get to the core!
Frequently asked questions
What do I get when I buy this document?
You get a PDF, available immediately after your purchase. The purchased document is accessible anytime, anywhere and indefinitely through your profile.
Satisfaction guarantee: how does it work?
Our satisfaction guarantee ensures that you always find a study document that suits you well. You fill out a form, and our customer service team takes care of the rest.
Who am I buying these notes from?
Stuvia is a marketplace, so you are not buying this document from us, but from seller millyphilip. Stuvia facilitates payment to the seller.
Will I be stuck with a subscription?
No, you only buy these notes for $12.99. You're not tied to anything after your purchase.
Can Stuvia be trusted?
4.6 stars on Google & Trustpilot (+1000 reviews)
76462 documents were sold in the last 30 days
Founded in 2010, the go-to place to buy study notes for 14 years now
