Exam (elaborations)
COUNTERBALANCE FORKLIFT AND ROUGH TERRAIN FORKLIFT OPERATOR CERTIFICATION QUESTIONS AND ANSWERS
- Course
- Institution
COUNTERBALANCE FORKLIFT AND ROUGH TERRAIN FORKLIFT OPERATOR CERTIFICATION QUESTIONS AND ANSWERS
[Show more]
Content preview
Name: Score:61 Multiple choice questions
Term 1 of 61
When unloading from a big ass trailer it's important to
- block the wheels if it becomes necessary to stop while on the ramp
- remember the stability pyramid
- block the trailer wheels
- support the trailer
- inspect/check dock boards
-check clearance
- ensure adequate lighting
- ensure adequate air quality
- avoid driving along the edge
- cross bridge/ramp plates squarely and slowlye
As soon as the thickness of the blade is worn past 90% the thickness of the shank
-visually inspect the integrity of the load
-be sure the proper attachment will be used
- determine the weight of the load
- check the load dimension
Term 2 of 61
The data plate must always be able to inform you
max allowable load weight and lift height
the manufacturer’s warranty details
the color and model of the forklift
the maintenance schedule for the forklift
,Term 3 of 61
With vertical mast forklifts, one the load is engaged, and if you have clearance, raise the load
_____________ before tilting the load and retracting the boom or backing up
10-12 inches (25 to 30 centimeters)
3-4 inches ( 8 to 10 centimeters)
1-2 feet (30 to 60 centimeters)
6-8 inches (15 to 20 centimeters)
Term 4 of 61
You have been tasked with moving construction materials with a telehandler forklift across
your jobsite. It's going to require that you transport those loads across rough terrain with
various grades and slopes. Which of the following statements is the correct safe practice for
performing this task?
- close the cylinder primary shut off valve
- wait for the engine to stall
- switch the key off
- hard solid rubber
- pressed on to the wheel hub
- no tread
- Primarily used indoors on hard, level, improved surfaces such as concrete
Stop and position the load to a safe traveling height
Keep the load uphill when driving up or down slopes. When unloaded keep the forks
downhill and slightly tilted down
Term 5 of 61
the point where a forklift is designed to lift it's maximum rated load is called the:
10 feet, 3 meters
10 Feet, 3 Meters
Lowest Point/ground
Rated Load Center
,Term 6 of 61
When parking propane powered units indoors for more than an hour
- travel in reverse up the ramp and forward down the ramp
- close the cylinder primary shut off valve
- wait for the engine to stall
- switch the key off
- placed on charge while parked
- have the battery disco if left unattended
maintain a safe distance away from any elevated dock, ramp or platform edge
Term 7 of 61
T or F: ROPS will still work if you don't wear a seatbelt
True
False
Term 8 of 61
Once you have picked up a load and backed out or retracted the boom from a stack you
should
Immediately lower the load to the ground
Stop and position the load to a safe traveling height
Drive forward without adjusting the load
Tilt the load forward to gain more space
Term 9 of 61
turning the forklift causes the CG or the CCG to move _______ from the center in the ___________
direction of the turn
Forward, Direct
Outward, Opposite
Inward, Same
Backward, Adjacent
, Term 10 of 61
T or F: With no load, a forklift's CG is located near the heavy counterweight toward the rear of
the unit?
True
False
Term 11 of 61
As the Mast tilts, the CG or CCG ________.
drops down significantly
moves forward and back
shifts sideways to the left
remains stationary in place
Term 12 of 61
When approaching a load with your forklift
- Max allowable load weigh
-Rated load center distance
-Max lifting height
- United weight
- Lifting attachments and relevant load capacity variations
- block the trailer wheels
- support the trailer
- inspect/check dock boards
-check clearance
- ensure adequate lighting
- ensure adequate air quality
- avoid driving along the edge
- cross bridge/ramp plates squarely and slowlye
maintain a safe distance away from any elevated dock, ramp or platform edge
-visually inspect the integrity of the load
-be sure the proper attachment will be used
- determine the weight of the load
- check the load dimension
The benefits of buying summaries with Stuvia:
Guaranteed quality through customer reviews
Stuvia customers have reviewed more than 700,000 summaries. This how you know that you are buying the best documents.
Quick and easy check-out
You can quickly pay through credit card or Stuvia-credit for the summaries. There is no membership needed.
Focus on what matters
Your fellow students write the study notes themselves, which is why the documents are always reliable and up-to-date. This ensures you quickly get to the core!
Frequently asked questions
What do I get when I buy this document?
You get a PDF, available immediately after your purchase. The purchased document is accessible anytime, anywhere and indefinitely through your profile.
Satisfaction guarantee: how does it work?
Our satisfaction guarantee ensures that you always find a study document that suits you well. You fill out a form, and our customer service team takes care of the rest.
Who am I buying these notes from?
Stuvia is a marketplace, so you are not buying this document from us, but from seller selftest. Stuvia facilitates payment to the seller.
Will I be stuck with a subscription?
No, you only buy these notes for $9.00. You're not tied to anything after your purchase.
Can Stuvia be trusted?
4.6 stars on Google & Trustpilot (+1000 reviews)
83637 documents were sold in the last 30 days
Founded in 2010, the go-to place to buy study notes for 14 years now