Exam (elaborations)
CWB 2 ALL MODULES EXAM
- Course
- Institution
- Book
CWB 2 ALL MODULES EXAM
[Show more]
Connected book
Book Title:
Author(s):
- Edition:
- ISBN:
- Edition:
Seller
Follow
maxmaxwellmm254
Content preview
CWB 2 ALL MODULES EXAM NEWEST ACTUAL EXAMCOMPLETE 90 QUESTIONS AND CORRECT DETAILED
ANSWERS
What is the term used to describe the following condition of lost corrosion
resistance?
"When certain stainless steels are heated between 500-850° C, carbides form at the
grain boundaries and cause a local depletion of chromium."
(A) Oxidization
(B) Increased toughness
(C) Solution heat treatment
(D) Sensitization - ANSWER: (D) Sensitization
Note: Also known as "carbide precipitation" -- Chromium binds to carbides, and
"sweats out" at the grain boundaries
On a radiograph, undercut appears as a _________ line.
(A) light
(B) dark - ANSWER: (B) dark
What is the Canadian Standard for safety in welding? - ANSWER: CSA W117.2
What is the typical three-phase input voltage in most Canadian welding shops? -
ANSWER: 600V
True or False: The cable from the workpiece back to the welding machine is called
the "ground lead". - ANSWER: False. The correct term is the "work lead".
What is the type of radiation that can damage living cells? - ANSWER: Ionizing
Name two examples of ionizing radiation. - ANSWER: X-rays and Gamma rays
What is the minimum suggested shade for a welding helmet when using 5/32 SMAW
electrode at 150 A? - ANSWER: Shade 10
Approx. how far could spatter travel when welding/cutting from 2.5m high? -
ANSWER: Possibly up to 6m
What is the toxic component contained in some copper alloys? - ANSWER: Beryllium
Which welding process will likely have the highest fume generation rate?
[SMAW / SAW / FCAW] - ANSWER: FCAW
,What do the terms TLV and TWA stand for? - ANSWER: TLV: Threshold limit value
TWA: Time weighted average
The action of UV light on oxygen produces which toxic gas? - ANSWER: Ozone
Which common fuel gas has the widest range where it can become flammable when
mixed with air? - ANSWER: Acetylene
What substance should you NEVER apply to a stiff pressure-adjusting screw on an
oxygen regulator? - ANSWER: Oil or grease
What is the maximum gauge pressure that acetylene should be used? (kPa/psi) -
ANSWER: 103 kPa (15 psi)
Which toxic gas is produced when welding on surfaces with chlorinated hydrocarbon
solvents? - ANSWER: Phosgene gas
What is the typical max. OCV of an AC welding machine? - ANSWER: 80 V
In an isometric drawing, the lines (for width, length and depth) are inclined at an
angle of how many degrees? - ANSWER: 30°
What are the maximum number of views in an orthographic drawing? - ANSWER: 6
What are the two general classes of picture drawings? - ANSWER: Perspective and
Isometric
What are the 5 basic joints? - ANSWER: 1) Butt
2) Corner
3) T
4) Lap
5) Edge
What are the 5 basic weld types? - ANSWER: 1) Groove
2) Fillet
3) Plug/Slot
4) Surfacing
5) Edge
Plasma cutting torch temp can reach temperatures of __________ ° Celsius. -
ANSWER: 30,000
True or False: All plasma arc cutting equipment is operated using DCEN. - ANSWER:
True
,True or False: Stainless steel can be readily cut with a normal oxy-fuel gas process. -
ANSWER: False
What are the two basic methods of plasma torch operation? - ANSWER: Transferred
and Non-Transferred arc
In North America, the 3 othographic views most commonly-used are: TOP, FRONT
and __________ Side.
[RIGHT / LEFT] - ANSWER: LEFT
What is the difference between a "weld symbol" and a "welding symbol"? -
ANSWER: A "weld symbol" indicates the specific kind of weld to be used (ex. fillet),
and is contained inside of "welding symbol".
In a welding symbol, is the size of the weld located to the LEFT or RIGHT of the fillet
weld symbol? - ANSWER: LEFT
In a welding symbol, is the length of the weld located to the LEFT or RIGHT of the
fillet weld symbol? - ANSWER: RIGHT
In what direction do the electrons flow in an electrical arc?
(A) anode --> cathode
(B) cathode --> anode - ANSWER: (B) cathode --> anode
In arc welding, the arc temperature can exceed temperatures of __________ °
Celsius? - ANSWER: 30,000
Which welding process has the highest arc efficiency? - ANSWER: SAW
Arc voltage __________ when arc length is increased.
[Increased / Decreased] - ANSWER: Increases
In GTAW, what type of penetration and weld width can be expected when using
DCEP? - ANSWER: Shallow penetration, and wide weld
Which polarity is most often chosen for direct current GTAW welding of steels and
why? - ANSWER: DCEN. More heat concentrated at the workpiece --> deeper
penetration
Does SMAW use CC or CV? - ANSWER: CC
For out-of-position welding, would you select a small or large diameter electrode? -
ANSWER: A small diameter electrode
, Does GMAW use CC or CV? - ANSWER: CV
What happens to the SAW weld when you switch from DCEP to DCEN? - ANSWER:
Increased deposition rate, but less penetration
What is the temperature for storing low-hydrogen electrodes? - ANSWER: 120°
Celsius
When using a consumable electrode in DCEN, the majority of the heat is
concentrated on the __________.
(A) Electrode
(B) Workpiece - ANSWER: (A) Electrode
When using a non-consumable electrode in DCEN, the majority of the heat is
concentrated on the __________.
(A) Electrode
(B) Workpiece - ANSWER: (B) Workpiece
Which has a "drooping" curve characteristic - CC or CV? - ANSWER: CC
AC transformer welding power sources use a:
(A) step-up transformer
(B) step-down transformer - ANSWER: (B) Step-down transformer
What is a diode used for in a welding machine?
(A) To produce AC current
(B) To produce DC current - ANSWER: (B) To produce DC current
The typical duty cycle for a Class 1 industrial welding power source is:
(A) 20%
(B) 35%
(C) 60%
(D) 150% - ANSWER: (C) 60%
What current/polarity is used when welding aluminum with GTAW?
(A) DCEN
(B) DCEP
(C) AC - ANSWER: (C) AC
True or False: a welding cable size designation "No. 4" is larger than a "No. 2". -
ANSWER: False.
The benefits of buying summaries with Stuvia:
Guaranteed quality through customer reviews
Stuvia customers have reviewed more than 700,000 summaries. This how you know that you are buying the best documents.
Quick and easy check-out
You can quickly pay through credit card or Stuvia-credit for the summaries. There is no membership needed.
Focus on what matters
Your fellow students write the study notes themselves, which is why the documents are always reliable and up-to-date. This ensures you quickly get to the core!
Frequently asked questions
What do I get when I buy this document?
You get a PDF, available immediately after your purchase. The purchased document is accessible anytime, anywhere and indefinitely through your profile.
Satisfaction guarantee: how does it work?
Our satisfaction guarantee ensures that you always find a study document that suits you well. You fill out a form, and our customer service team takes care of the rest.
Who am I buying these notes from?
Stuvia is a marketplace, so you are not buying this document from us, but from seller maxmaxwellmm254. Stuvia facilitates payment to the seller.
Will I be stuck with a subscription?
No, you only buy these notes for $17.99. You're not tied to anything after your purchase.
Can Stuvia be trusted?
4.6 stars on Google & Trustpilot (+1000 reviews)
75759 documents were sold in the last 30 days
Founded in 2010, the go-to place to buy study notes for 14 years now