100% satisfaction guarantee Immediately available after payment Both online and in PDF No strings attached
logo-home
Fire Apparatus Driver/Operator - Pumper End of Course Exam $15.49   Add to cart

Exam (elaborations)

Fire Apparatus Driver/Operator - Pumper End of Course Exam

 0 view  0 purchase
  • Course
  • Fire Apparatus Driver/Operator - Pumper End of Co
  • Institution
  • Fire Apparatus Driver/Operator - Pumper End Of Co

A hose has a flow rate of 50 gpm with a friction loss of 2 psi. If the flow rate increases to 200 gpm, then the friction loss will increase to: - Correct Answer A. 32 psi (Correct Answer) B. 24 psi C. 16 psi (Not Correct) D. 8 psi GPM is 16 times greater = 2 x 16 A major advantage of sm...

[Show more]

Preview 3 out of 20  pages

  • September 12, 2024
  • 20
  • 2024/2025
  • Exam (elaborations)
  • Questions & answers
  • Fire Apparatus Driver/Operator - Pumper End of Co
  • Fire Apparatus Driver/Operator - Pumper End of Co
avatar-seller
chaserdreamer
Fire Apparatus Driver/Operator - Pumper
End of Course Exam

A hose has a flow rate of 50 gpm with a friction loss of 2 psi. If the flow rate increases to 200 gpm, then the friction
loss will increase to: - Correct Answer A. 32 psi (Correct Answer)

B. 24 psi

C. 16 psi (Not Correct)

D. 8 psi

GPM is 16 times greater = 2 x 16

A major advantage of small diameter hoses is their: - Correct Answer A. Use as supply lines

B. Use in drafting from static water supplies

C. ease of relocation and movement (Correct Answer)

D. Inflexibility, allowing fire apparatus to drive over them

A priming device works by: - Correct Answer A. Centrifugal force

B. Creating a partial vacuum (Correct Answer)

C. Centripetal force

D. Creating compression within a rotating chamber

A pumper has two 300-foot sections of 3-inch hoses with 2 ½-inch couplings. They are siamesed into a 200 feet of 5-
inch attack line. The attack line that ends in a master stream with a flow of 350 GPM. Given this hose layout,
determine the total pressure loss for this hose assembly. - Correct Answer A. 19 psi

B. 22 psi

C. 44 psi (Correct Answer)

D. 78 psi

FL (Siamesed) = C x (Q/100)² x (L/100)
FL (Siamesed) = .2 x (350/100)² x (300/100)
FL (Siamesed) = .2 x (3.5)² x 3
FL (Siamesed) = .2 x 12.25 x 3
FL (Siamesed) = 7.35

FL (Attack 1) = C x (Q/100)² x (L/100)
FL (Attack 1) = .08 x (350/100)² x (200/100)
FL (Attack 1) = .08 x (3.5)² x 2
FL (Attack 1) = .08 x 12.25 x 2
FL (Attack 1) = 1.96

TPL = FL + EL + APL
TPL = (7.35 + 1.96) + 0 + (10 [appliance] + 25 [master stream])
TPL = 9.31 + 0 + 10

,TPL = 44.31

A quantity of 16.66 pounds of water equals: - Correct Answer A. 16.66 gal

B. 8.33 gal

C. 6.78 gal

D. 2.0 gal (Correct Answer)

1 gal = 8.35 lbs

16.66/8.35 = 1.99

All of the following are important reasons for maintaining inspection documentation on a fire apparatus EXCEPT: -
Correct Answer A. Providing evidence during equipment accident investigations

B. Verifying that you are inspecting the correct apparatus (Correct Answer)

C. Providing proof for warranty and claims concerning the apparatus

D. Determining when the equipment is due for replacement

All of the following are potential water sources for an apparatus fire pump EXCEPT: - Correct Answer A. Pressurized
water from a hydrant

B. The onboard tank

C. Pressurized water from another fire pump

D. A municipal storm drain (Correct Answer)

E. A swimming pool

All of the following are rescue tools EXCEPT: - Correct Answer A. Spreaders

B. Extensions rams

C. Drills (Correct Answer)

D. Shears

All of the following statements about driving a fire apparatus through areas of restricted horizontal and vertical
clearances are true EXCEPT: - Correct Answer A. Use your side view mirrors

B. Make sure you can see your spotter

C. Judge your fire apparatus' clearance around obstructions (Not Correct)

D. Use the appropriate turn signal

All of the following statements about static sources are true EXCEPT: - Correct Answer A. Pre-incident planning must
be done to assess the accessibility of static waters sources

B. Weather can dramatically affect the accessibility and usability of static water sources

C. The static water sources that is closest to the incident should be always used first (Correct Answer)

D. Safety of the equipment and crew is paramount when choosing a static water source

Allowing the fire apparatus engine to idle over an extended period of time can lead to all of the following EXCEPT: -
Correct Answer A. Fuel Waste

, B. Engine fatigue (Correct Answer)

C. Engine wear

D. Engine debris build-up

An important consideration when determining the position of a fire apparatus is the: - Correct Answer A. Manpower
available

B. Distance from staging

C. Method of attack (Correct Answer)

D. Location of parking lot

As salt water or water containing certain chemicals can corrode the apparatus pump, you should: - Correct Answer A.
Never use static sources of water that are not potable

B. Attach a reverse osmosis (RO) filter to the intake hose before you attach the strainer to lessen the effects of salt or
other chemicals

C. Flush the pump with fresh water after using it (Correct Answer)

D. Flush the pump with a neutralizer and fresh water after using it.

Before driving over a guarded railroad crossing during an emergency response: - Correct Answer A. Look both right
and left and proceed cautiously (Correct Answer)

B. Look to the right, the gate will be up on the left

C. Look to the left, the gate will up on the right

D. Bring the apparatus to a complete stop

Bouncing water off the inside walls of the nozzle bore to create a fog pattern is called: - Correct Answer A. Periphery
deflection (Correct Answer)

B. A broken stream

C. An impinging stream

D. A deluge stream

Calculate the capacity of this pool. The average depth is five feet

Pool is 40 feet by 150 Feet - Correct Answer A. 6,000 gallons

B. 30,000 gallons

C. 125,000 gallons

D. 225,000 gallons (Correct Answer)


Capacity in gallons = 7.5 (L) (W) (D)
Capacity in gallons = 7.5 (150) (40) (5)
Capacity in gallons = 225,000

Calculate the gpm flowing from a 1 3/4 inch solid master stream nozzle operating at a nozzle pressure of 80 psi. -
Correct Answer A. 801 GPM

The benefits of buying summaries with Stuvia:

Guaranteed quality through customer reviews

Guaranteed quality through customer reviews

Stuvia customers have reviewed more than 700,000 summaries. This how you know that you are buying the best documents.

Quick and easy check-out

Quick and easy check-out

You can quickly pay through credit card or Stuvia-credit for the summaries. There is no membership needed.

Focus on what matters

Focus on what matters

Your fellow students write the study notes themselves, which is why the documents are always reliable and up-to-date. This ensures you quickly get to the core!

Frequently asked questions

What do I get when I buy this document?

You get a PDF, available immediately after your purchase. The purchased document is accessible anytime, anywhere and indefinitely through your profile.

Satisfaction guarantee: how does it work?

Our satisfaction guarantee ensures that you always find a study document that suits you well. You fill out a form, and our customer service team takes care of the rest.

Who am I buying these notes from?

Stuvia is a marketplace, so you are not buying this document from us, but from seller chaserdreamer. Stuvia facilitates payment to the seller.

Will I be stuck with a subscription?

No, you only buy these notes for $15.49. You're not tied to anything after your purchase.

Can Stuvia be trusted?

4.6 stars on Google & Trustpilot (+1000 reviews)

80796 documents were sold in the last 30 days

Founded in 2010, the go-to place to buy study notes for 14 years now

Start selling
$15.49
  • (0)
  Add to cart