100% satisfaction guarantee Immediately available after payment Both online and in PDF No strings attached
logo-home
NCCER INST. QUESTIONS AND ANSWERS 2024 EXAM REVIEW $12.99   Add to cart

Exam (elaborations)

NCCER INST. QUESTIONS AND ANSWERS 2024 EXAM REVIEW

 9 views  0 purchase
  • Course
  • NCCER INST
  • Institution
  • NCCER INST

NCCER INST. QUESTIONS AND ANSWERS 2024 EXAM REVIEW 1. An orifice plate causes a pressure drop which can be measured calculate : 2. Cable shields should be connected to the : 3. Cleaning of piping and tubing is generally required after all of the following EXCEPT : 4. A valve has linear- f...

[Show more]

Preview 2 out of 10  pages

  • September 8, 2024
  • 10
  • 2024/2025
  • Exam (elaborations)
  • Questions & answers
  • nccer inst
  • 3 clea
  • NCCER INST
  • NCCER INST
avatar-seller
BrainEdge
NCCER INST. QUESTIONS AND ANSWERS 2024 EXAM REVIEW

1. An orifice plate causes a A. Pressure
pressure drop which can (B.) Flow
be measured calculate : C. Temperature
D. Detector

2. Cable shields should be A. Signal ground reference point
connected to the : (B) Ground at each accessible location
C. First accessible grounding electrode
D . Raceway or cable tray in which the cable
tray is routed

3. Cleaning of piping and A. Shipping
tubing is generally required B. Manufacturing
after all of the following EX- C. Construction
CEPT : (D) Modification

4. A valve has linear- flow ( A. ) flow corresponds directly to the valve stem
characteristics when the : position .
B. differential pressure corresponds directly to
the valve stem position
C. flow is high enough to retract the valve stem
.
D. flow does not pass through the control loops
.

5. Workers should always A. Deenergized until proven
assume that all electrical (B) Energized until proven
equipment and lines are C. Proven with a hot stick
D. Proven by another employee

6. What instrument drawing A. Orthographic Drawing
shows an actual represen- B. Location Drawing
tation of a process operat- C. Isometric Drawing
ing sequence ? ( D)P & ID

7. Old packing should be A. One size larger
replaced with new packing B. One size smaller
which is : (C) In kind
D. Softer material



, NCCER INST. QUESTIONS AND ANSWERS 2024 EXAM REVIEW

8. For most tube bender ra- (A.) One tube diameter
dius blocks , a 90 degree B1 1/2 tube diameter
bend gains approximately C. 2 tube diameter
D. 2 ½ tube diameter

9. Where are rubber gas- A. In a high pressure / low temperature sys-
kets used ? tems
(B) In a low pressure / low temperature sys-
tems
C. In a hot water / steam systems
D. In low pressure / high temperature systems

10. The process parameter A. Process Rate
that is selected for control B. Controlled Energy
is called the : C. Process Setpoint
( D. ) Controlled Variable

11. What is the purpose of ( A. ) Shows instrument location as it related to
the P & ID ? the process
B. Provides uniform guidelines for Connection
of Instrumentation
C. Shows actual equipment location within the
structure
D. Shows Instrument elations

12. When replacing a control (A) Location of signal ports
valve " in kind " , what is the B. Flange to flange dimensions
least important ? C. Failure mode
D. Valve type

13. Smart instrument trans- A. Manometer
mitters require which of (B) Communicator
the following for calibration C. Oscilloscope
and configuration ? D. Volt - ohm meter / P in

14. What is the purpose of anI A. Indicates the actual position of the control
/ P in a control loop ? valve
(B.) Converts the controllers electrical signal to
a control pressure
C. Allows the controllers integral / proportional

The benefits of buying summaries with Stuvia:

Guaranteed quality through customer reviews

Guaranteed quality through customer reviews

Stuvia customers have reviewed more than 700,000 summaries. This how you know that you are buying the best documents.

Quick and easy check-out

Quick and easy check-out

You can quickly pay through credit card or Stuvia-credit for the summaries. There is no membership needed.

Focus on what matters

Focus on what matters

Your fellow students write the study notes themselves, which is why the documents are always reliable and up-to-date. This ensures you quickly get to the core!

Frequently asked questions

What do I get when I buy this document?

You get a PDF, available immediately after your purchase. The purchased document is accessible anytime, anywhere and indefinitely through your profile.

Satisfaction guarantee: how does it work?

Our satisfaction guarantee ensures that you always find a study document that suits you well. You fill out a form, and our customer service team takes care of the rest.

Who am I buying these notes from?

Stuvia is a marketplace, so you are not buying this document from us, but from seller BrainEdge. Stuvia facilitates payment to the seller.

Will I be stuck with a subscription?

No, you only buy these notes for $12.99. You're not tied to anything after your purchase.

Can Stuvia be trusted?

4.6 stars on Google & Trustpilot (+1000 reviews)

81531 documents were sold in the last 30 days

Founded in 2010, the go-to place to buy study notes for 14 years now

Start selling
$12.99
  • (0)
  Add to cart