CMP 210 exam 2 EXAM PREP WITH
COMPLETE SOLUTION
What is the difference between modular and actual brick dimensions? - =Modular bricks are
those whose actual size plus a motor. JOint can be assembled on a 4 inch standard module.
What is the design module used when sizing concrete masonry units? - =8 inch module is used
to size the CMU.
What two factors are considered when establishing the weathering index? - =Number of freeze
cycle days and annual winter rainfall.
What the different ways concrete masonry units are cured? - =Low pressure kiln and high
pressure autoclave.
Why are the temperature and humidity carefully controlled when drying bricks? - =Any slight
variation in temperature and humidity will result in shrinkage and formation of cracks in bricks.
How can you identify solid masonry clay units? - =By the presence of core area which is less
than 25 percent of cross sectional area of the brick.
How does the tensile and flexural strength of CMUs compare with compressive strength? -
=Tensile and flexual strength depends on the compressive strength of concrete. Tensile
strength of concrete is about 5 to 15% of compressive strength. Flexural strength is about 15 to
20% of compressive strength.
How is the insulation value of CMUs improved? - =Porous and lightweight aggregates are used
to improve the insulation value of CMUs. Additional insulation materials are added to improve
its insulation value.
, What are the three major classifications of CMUs? - =Concrete brick, concrete block, special
units.
Describe three ways to span openings in masonry walls - =Steel lintel, arches,corbelling
What are the three required elements for a cavity wall? - =(Multiwythe), airspace, water,
corrosion resistant metal ties.
What is the purpose of flashings and weep holes in composite masonry construction? -
=Flashings- waterproof membranes that intercept water in the cavity.
Weepholes- are small openings that allows water to drain out of the cavity walls.
Identify by name and/or shape, the most common steel sections. - =wide flange- W
American standard- S
Channel- C
Angle- L
Standard Tee- ST
wide flange tee-WT
hollow structural- HSS
Describe the general features (shape, depth, weight) of a beam identified as 'W 24 x 94' 3. -
=W- Wide Flange Section
24- nominally 24" deep
94- weighs 94 Ibs/ lineal ft
What alloys are added to iron to create stainless steel? What are the benefits gained from
adding these alloys. - =Chromium- Increases hardness, corrosion and wear resistance
Nickel and mangnese- Increase strength and toughness and make material easier to fabricate
The benefits of buying summaries with Stuvia:
Guaranteed quality through customer reviews
Stuvia customers have reviewed more than 700,000 summaries. This how you know that you are buying the best documents.
Quick and easy check-out
You can quickly pay through credit card or Stuvia-credit for the summaries. There is no membership needed.
Focus on what matters
Your fellow students write the study notes themselves, which is why the documents are always reliable and up-to-date. This ensures you quickly get to the core!
Frequently asked questions
What do I get when I buy this document?
You get a PDF, available immediately after your purchase. The purchased document is accessible anytime, anywhere and indefinitely through your profile.
Satisfaction guarantee: how does it work?
Our satisfaction guarantee ensures that you always find a study document that suits you well. You fill out a form, and our customer service team takes care of the rest.
Who am I buying these notes from?
Stuvia is a marketplace, so you are not buying this document from us, but from seller hurryben. Stuvia facilitates payment to the seller.
Will I be stuck with a subscription?
No, you only buy these notes for $11.49. You're not tied to anything after your purchase.