Voice Data Video (VDV) Practice Test Questions with Correct Answers Guaranteed Full Score Download!!!
3 views 0 purchase
Course
VDV
Institution
VDV
Voice Data Video (VDV) Practice Test
Questions with Correct Answers
Guaranteed Full Score Download!!!
______ and ________ are the two types of delay measured in a cable test.
a. delay skew / NVP
b. NVP / return loss
c. propagation delay / delay skew
d. propagation delay / NVP
- Answer -c. p...
Voice Data Video (VDV) Practice Test
Questions with Correct Answers
Guaranteed Full Score Download!!!
______ and ________ are the two types of delay measured in a cable test.
a. delay skew / NVP
b. NVP / return loss
c. propagation delay / delay skew
d. propagation delay / NVP
- Answer -c. propagation delay / delay skew
_________ and _________ are the two types of delay measured in a cable test.
a. Delay skew/NVP
b. NVP/return loss
c. Propagation delay/delay skew
d. Propagation delay/NVP
- Answer -c. Propagation delay/delay skew
__________ was devised so that a transmission path can carry many telephone conversations at the
same time.
a. dial tone
b. asynchronous transmission
c. tip/ring
d. multiplexing
- Answer -d. multiplexing
____________ are the most common shock-related injury.
a. Amputations
,b. Broken bones
c. Burns
d. Falls - Answer -c. Burns
"The portion of the wiring system between the load side of the overcurrent device or power-limited
supply and the connected equipment", is the definition of a _______.
a. Class 1 circuit
b. Class 2 circuit
c. Class 3 circuit
d. Circuit Integrity cable
- Answer -a. Class 1 circuit
REF: [NEC] 725.2
10. Installation of equipment that is electrically connected to a communications network shall
__________________________.
a. also include temporary connection of testing equipment for maintenance or repair.
b. be listed as being suitable for electrical connection to a communication network.
c. be listed as being suitable for electrical connection to a communications network including temporary
connection of testing equipment for maintenance orrepair.
d. none of the above
- Answer -b. be listed as being suitable for electrical connection to a communication network.
REF: [NEC] 800.170, 800.18
46. What size outdoor antenna conductor shall be used for a receiving station, where at the maximum
open span length is 150 feet, and the material is hard-drawn copper?
a. 20 AWG
b. 19 AWG
c. 14 AWG
d. 12 AWG
- Answer -c. 14 AWG
REF: [NEC] 810.16(A)
,48. For new construction, a minimum of one communications outlet shall be installed within the
dwelling unit ____________.
a. in the entry way
b. in a common area
c. in a readily accessible area
d. near the service providers point of demarcation
- Answer -c. in a readily accessible area
REF: [NEC] 800.156
A ______ is used to measure optical power.
a. dispersion meter
b. light source
c. power meter
d. volt ohmmeter - Answer -c. power meter
A _______ modular jack contains connection points for two telephone pairs.
a. RJ-11
b. RJ-45
c. T1
d. DTMF - Answer -a. RJ-11
A bonding jumper connected between the radio and television receiving equipment and the power
grounding electrode shall not be smaller than ______.
a. 18 AWG
b. 12 AWG
c. 10 AWG
d. 6 AWG - Answer -d. 6 AWG
REF: [NEC] 810.21(J)
, A bonding jumper not smaller than ______ copper or equivalent shall be connected between the CATV
systems grounding electrode system at the building or structure served where separate electrodes are
used.
a. 12 AWG
b. 10 AWG
c. 8 AWG
d. 6 AWG - Answer -d. 6 AWG
REF: [NEC] 820.100(D)
A cable is required to have a minimum of how many conductors?
a. one
b. two
c. three
d. four - Answer -b. two
REF: [NEC] 800.2
A compression driver is:
a. a seal-tite fitting used on high conduit joints to prevent leakage
b. software used to compress a hard disk
c. the device that produces the high or mid frequency energy that is fed into a horn or other relating
device
d. a subwoofer - Answer -c. the device that produces the high or mid frequency energy that is fed
into a horn or other relating device
A control circuit for a permanent amusement attraction should be supplied from a source that has a
rated output of not more than:
a. 24 volts and 15 amperes
b. 30 volts and 20 amperes
c. 24 volts and 1000 volt-amperes
The benefits of buying summaries with Stuvia:
Guaranteed quality through customer reviews
Stuvia customers have reviewed more than 700,000 summaries. This how you know that you are buying the best documents.
Quick and easy check-out
You can quickly pay through credit card or Stuvia-credit for the summaries. There is no membership needed.
Focus on what matters
Your fellow students write the study notes themselves, which is why the documents are always reliable and up-to-date. This ensures you quickly get to the core!
Frequently asked questions
What do I get when I buy this document?
You get a PDF, available immediately after your purchase. The purchased document is accessible anytime, anywhere and indefinitely through your profile.
Satisfaction guarantee: how does it work?
Our satisfaction guarantee ensures that you always find a study document that suits you well. You fill out a form, and our customer service team takes care of the rest.
Who am I buying these notes from?
Stuvia is a marketplace, so you are not buying this document from us, but from seller Eddiebeststudy. Stuvia facilitates payment to the seller.
Will I be stuck with a subscription?
No, you only buy these notes for $8.49. You're not tied to anything after your purchase.