DOD MWS cdc exam with 100% correct answers 2024/2025
5 views 0 purchase
Course
DOD MWS cdc
Institution
DOD MWS Cdc
1. an MWS apparatus equipped with fire pump must have a tank to pump line at least 2 in in diameter and capable of supplying the pump with 500 GPM unit at least 80% of water in the tank is emptied
2. NMWS apparatus must be equipped with at least one external fuel connection connected into the tank...
1. an MWS apparatus equipped with fire pump must have a tank to pump line at least 2 in in diameter
and capable of supplying the pump with 500 GPM unit at least 80% of water in the tank is emptied
2. NMWS apparatus must be equipped with at least one external fuel connection connected into the
tank that allows the tank to be filled at a minimum rate of 1000 GPM
3. The external fuel connection should be equipped with a valve strainer and 30° elbow
4. valves that are 3 in or larger must be of the slow closing design
5. an MWS apparatus must have at least three large tank discharge capable of discharging 90% of the
tank volume at an average rate of 1,000 GPM correct answersidentify five requirements for a MWS
apparatus that can be found in NFPA 1901
saddle tanks correct answerswhen checking the left front or right front side of the apparatus, don't
forget to inspect:
an independent testing agency correct answerspre-service pump certification tests are conducted by:
10,4 correct answerswhen using a static body of water as your water source during fire apparatus service
testing the water surface must not be more than_____feet above the center line of the pump intake and
the water must be at least____feet deep
stop the testing until the problem is corrected correct answersif the engine speed check provides the
MWS apparatus is running at a different speed than that which it was originally rated, you need to:
30 correct answerswhen conducting a priming device test and using a pump of less than 1500 GPM, the
priming device should be able to create the necessary vacuum_____seconds to lift water 10 ft through
20 ft of hard suction hose
And no less than 3 seconds and no more than 10 seconds correct answersThe three parts of the pressure
control test require you to close the flowing valves one at a time:
, 10% correct answersThe gauge and flow meter test compares flow meter readings with actual pilot tube
readings. The two readings should differ no more than:
NFPA 1901 correct answersThe tank to pump flow rate test measures whether the piping between an
apparatus water tank and fire pump meets the minimum flow standard of:
1. keeps everyone on the team informed about equipment conditions
2. helps determine whether equipment should be repaired / replaced. correct answersidentify two most
important reasons for maintaining good MWS apparatus records.
start the engine without a load. correct answersan MWS apparatus should be started with all electrical
switches and the OFF position in order to:
20 ft of hard suction hose correct answerswhen testing the priming device on an MWS apparatus with a
fire pump with the capacity less than 1500 GPM, the priming device should be able to create the
necessary vacuum in 30 seconds to lift water 10 ft through:
1. road test
2. independent pump certification test
3. hydrostatic test
4. purchase acceptance test correct answersidentify four pre-service tests for an MWS apparatus
equipped with a fire pump
1. priming device
2. hard suction hose
3. pump correct answersidentify three items that are checked for leaks during vacuum test.
10 in and 5 minutes correct answerswhen performing a vacuum service test, once the engine is turned
on, the column of mercury should fall no more than:
1. tachometer
2. smooth bore tip
The benefits of buying summaries with Stuvia:
Guaranteed quality through customer reviews
Stuvia customers have reviewed more than 700,000 summaries. This how you know that you are buying the best documents.
Quick and easy check-out
You can quickly pay through credit card or Stuvia-credit for the summaries. There is no membership needed.
Focus on what matters
Your fellow students write the study notes themselves, which is why the documents are always reliable and up-to-date. This ensures you quickly get to the core!
Frequently asked questions
What do I get when I buy this document?
You get a PDF, available immediately after your purchase. The purchased document is accessible anytime, anywhere and indefinitely through your profile.
Satisfaction guarantee: how does it work?
Our satisfaction guarantee ensures that you always find a study document that suits you well. You fill out a form, and our customer service team takes care of the rest.
Who am I buying these notes from?
Stuvia is a marketplace, so you are not buying this document from us, but from seller QUILLSKY. Stuvia facilitates payment to the seller.
Will I be stuck with a subscription?
No, you only buy these notes for $15.99. You're not tied to anything after your purchase.
