Exam (elaborations)
ASE STYLE QUESTIONS AND ANSWERS WITH SOLUTIONS 2024
- Course
- Institution
ASE STYLE QUESTIONS AND ANSWERS WITH SOLUTIONS 2024
[Show more]
Content preview
ASE STYLE QUESTIONS AND ANSWERSWITH SOLUTIONS 2024
Technician A says a pilot bearing is a bushing that supports the forward end of the transmission input
shaft. Technician B says a pilot bearing is a bushing that reduces friction between the clutch fork and
pressure plate. Who is right? - ANSWER A only.
Technician A says the clutch disc is bolted to the transmission input shaft. Technician B says the clutch
disc is splined to the transmission input shaft. Who is right? - ANSWER B only.
Technician A says clutch disc torsion springs are used to fasten the clutch disc to the transmission input
shaft. Technician B says clutch disc torsion springs help absorb some of the vibration produced by clutch
engagement. Who is right? - ANSWER B only.
A car is brought into the shop with a worn clutch. Technician A tells the owner of the car that highway
driving will wear out a clutch faster than city driving. Technician B tells the owner that city driving wears
out a clutch faster than highway driving. Who is right? - ANSWER B only.
A clutch is being tested for slippage. Technician A says when performing this test, the emergency brake
should be engaged. Technician B says when testing a clutch for slippage, the car's transmission should be
placed in high gear. Who is right? - ANSWER Both A and B.
An automobile's clutch has too much "free play." Technician A says this problem can cause clutch
slippage. Technician B says this problem can cause clutch dragging. Who is right? - ANSWER B only.
While discussing the functions of the basic parts of a manual transmission, Technician A says the input
shaft transfers rotating power out of the transmission to the drive shaft. Technician B says the input shaft
is used to turn the gears inside the transmission. Who is right? - ANSWER B only.
A particular transmission's drive gear has 10 teeth and the gear being driven has 30 teeth. Technician A
says the gear ratio in this situation would be 3:1. Technician B says the gear ratio in this situation would
be 4:1. Who is right? - ANSWER A only.
, Technician A says when a manual transmission is in neutral, all of the synchronizer sleeves are located at
the end of the countershaft. Technician B says when a manual transmission is in neutral, all of the
synchronizer sleeves are located in the center of their hubs. Who is right? - ANSWER B only.
A manual transmission is not operating properly. Technician A says the first step is to remove the
transmission from the vehicle and begin teardown. Technician B says the first step is to determine the
cause of the problem. Who is right? - ANSWER B only.
A manual transmission is hard to shift into gear. Technician A looks for a bent shift rod. Technician B
checks the condition of the clutch. Who is right? - ANSWER Both A and B.
Brass-colored particles are discovered in the case of a manual transmission during disassembly.
Technician A checks the condition of the thrust washers. Technician B believes one or more synchronizers
could be damaged. Who is right? - ANSWER Both A and B.
Technician A says an automatic transmission's valve body connects and disconnects the engine and
transmission. Technician B says an automatic transmission's torque converter connects and disconnects
the engine and transmission. Who is right? - ANSWER B only.
Technician A says the torque converter housing bolts to the rear of the transmission case. Technician B
says the converter housing bolts to the front of the automatic transmission's extension housing. Who is
right? - ANSWER Neither A nor B.
Technician A says an automatic transmission's extension housing supports the transmission input shaft.
Technician B says an automatic transmission's extension housing supports the transmission output shaft.
Who is right? - ANSWER B only.
An automobile is brought into the shop with an automatic transmission "slippage" problem. Technician A
checks the transmission's fluid level. Technician B inspects the condition of the transmission's valve body
first. Who is right? - ANSWER A only.
An automatic transmission's fluid has a "milky" color. Technician A checks to see if engine oil is leaking
into the transmission. Technician B checks to see if engine coolant is leaking into one of the transmission
lines. Who is right? - ANSWER B only.
The benefits of buying summaries with Stuvia:
Guaranteed quality through customer reviews
Stuvia customers have reviewed more than 700,000 summaries. This how you know that you are buying the best documents.
Quick and easy check-out
You can quickly pay through credit card or Stuvia-credit for the summaries. There is no membership needed.
Focus on what matters
Your fellow students write the study notes themselves, which is why the documents are always reliable and up-to-date. This ensures you quickly get to the core!
Frequently asked questions
What do I get when I buy this document?
You get a PDF, available immediately after your purchase. The purchased document is accessible anytime, anywhere and indefinitely through your profile.
Satisfaction guarantee: how does it work?
Our satisfaction guarantee ensures that you always find a study document that suits you well. You fill out a form, and our customer service team takes care of the rest.
Who am I buying these notes from?
Stuvia is a marketplace, so you are not buying this document from us, but from seller Performance. Stuvia facilitates payment to the seller.
Will I be stuck with a subscription?
No, you only buy these notes for $14.99. You're not tied to anything after your purchase.
Can Stuvia be trusted?
4.6 stars on Google & Trustpilot (+1000 reviews)
67096 documents were sold in the last 30 days
Founded in 2010, the go-to place to buy study notes for 14 years now
