Slip blinds used in a hydrostatic test must meet or exceed the engineering specifications for all flanges in
the system. - True
Tapped holes used with screwed-in eyebolts should have a minimum depth of how many times the bolt
diameter? - 1 1/2
A(n) _______is a machined metal slot in a shaft and...
BOILERMAKER 4
Slip blinds used in a hydrostatic test must meet or exceed the engineering specifications for all flanges in
the system. - True
Tapped holes used with screwed-in eyebolts should have a minimum depth of how many times the bolt
diameter? - 1 1/2
A(n) _______is a machined metal slot in a shaft and on parts such as gears and pulleys that accept a key.
- Keyway
A(n)__________ fits into a keyway and prevents parts such as gears or pulleys from rotating
on a shaft. - Key
______ are established standards for machining threads. - Thread standards
A chain sling should be discarded if any portion
of the chain is worn by____ - 15 percent or more
A hook that is hooked 1/4 off center can theoretically carry about what percent of the rated load? -
86
A one-handed signal that is given with the fist in front of the body and the thumb pointing toward the
signaler's body means - extend the boom
A tag line should be attached to a load where it will give the____ - greatest mechanical advantage
After reaching 50 percent of the desired test pressure during a hydrostatic test, increase the test
pressure in increments of__ - 10 percent
, An approximation of the diameter of a screw is known as the screw's_______ - Nominal size
An excessive number of trays in a tower will
result in _______. - excessive pressure drops across the tower
Custom-fabricated spreader and equalizer I beams should be tested at what percent of their rated
capacity? - 125
Dredging and other marine work require what type of slings because they withstand corrosion better? -
Chain
Fasteners with ____________ thread are used when rapid assembly or disassembly of parts is required. -
United National Coarse (UNC) thread
Heat that can be detected by touch is called _______ - sensible heat
How many Btus are needed to change water
into steam? - 970
If it is apparent that the crane operator has misunderstood a hand signal, the signal person should___ -
signal the operator to stop
In a forced draft system, a fan pushes the air into the_____. - tube sheet
In which type of feed combination does an extra feed appear in the bottom product stream? -
Extractive
L
Figure 1
The benefits of buying summaries with Stuvia:
Guaranteed quality through customer reviews
Stuvia customers have reviewed more than 700,000 summaries. This how you know that you are buying the best documents.
Quick and easy check-out
You can quickly pay through credit card or Stuvia-credit for the summaries. There is no membership needed.
Focus on what matters
Your fellow students write the study notes themselves, which is why the documents are always reliable and up-to-date. This ensures you quickly get to the core!
Frequently asked questions
What do I get when I buy this document?
You get a PDF, available immediately after your purchase. The purchased document is accessible anytime, anywhere and indefinitely through your profile.
Satisfaction guarantee: how does it work?
Our satisfaction guarantee ensures that you always find a study document that suits you well. You fill out a form, and our customer service team takes care of the rest.
Who am I buying these notes from?
Stuvia is a marketplace, so you are not buying this document from us, but from seller ACADEMICMATERIALS. Stuvia facilitates payment to the seller.
Will I be stuck with a subscription?
No, you only buy these notes for $7.99. You're not tied to anything after your purchase.