100% satisfaction guarantee Immediately available after payment Both online and in PDF No strings attached
logo-home
RIGGING PRACTICES QUESTIONS AND ANSWERS $10.99   Add to cart

Exam (elaborations)

RIGGING PRACTICES QUESTIONS AND ANSWERS

 4 views  0 purchase
  • Course
  • RIGGING
  • Institution
  • RIGGING

RIGGING PRACTICES QUESTIONS AND ANSWERS

Preview 2 out of 5  pages

  • August 10, 2024
  • 5
  • 2024/2025
  • Exam (elaborations)
  • Questions & answers
  • RIGGING
  • RIGGING
avatar-seller
GEEKA
RIGGING PRACTICES QUESTIONS AND ANSWERS
A load chart range diagram can best be used to help identify: - answer- net capacity

For mobile crane working at maximum radius, exceeding what percentage of the cranes
capacity requires the radius to be verified? - answer- 80%

The minimum depth of thread engagement for a 1/2 in eyebolt into steel object is? -
answer- 3/4 in

When tying knots in synthetic rope lashing, the rated load is increased by 50% ? -
answer- false

The size of shackle that can be used in the eye of a wire rope sling must be ________
the wire rope size? - answer- equal to or greater than

A shackle must be marked with the rated load, re-inspected due date, and the date
manufacture? - answer- false

When working near energized power lines where the crane or load could cross the
absolute limit of approach, what additional requirements must the crane team follow? -
answer- designated spotter must be stationed to watch clearances

The load weight of a personnel lift must not exceed _____ of the hoists rated capacity
for the working radius ? - answer- (50%)

A manufacturer's certificate of proof test may satisfy the initial test requirements for
rigging equipment? - answer- false

Which of the following operator actions will most likely cause a reduction in the capacity
of a mobile crane? - answer- booming down

An angular pull of 45 degrees is allowed on non shouldered type eye bolts? - answer-
false

Two slings creating a 60 degree sling angle are used to lift a 4,000 pound item. The
appropriate rated load for each sling is 2,000 pounds. - answer- false

When are loads allowed to be moved over personnel? - answer- never

Given a 1/2 in steel walled empty cylindrical tank that is opened at one end, calculate its
weight (round answer to the nearest hundred) - answer- 1800 lbs

A crane accident occurs when any one of the elements in the crane operating envelope
fails to perform correctly during crane operations, maintenance, or testing, which results
in any of the following except: - answer- over rigging the load

, A straight-line hitch is good for _____ of a sling rated load? - answer- 100%

The goal of the rigging gear test and inspection program is to prevent personnel injury -
answer- identify sub-standard equipment

What is the best way to prevent a load from swinging when it is lifted using a crane or a
hoist - answer- center the hook over the cg of the load

If you have an accident with a crane or you find damage and suspect an accident has
happened, your first step is to? - answer- stop operations as soon as safely possible

In general, you should never place the eye of the wire rope sling around an object that
has a diameter greater than - answer- 1/2

A pre-job briefing is not required prior to performing a complex lift? - answer- false

Natural fiber rope slings are not to be used for overhead lifting? - answer- true

Anti-two block devices are operational safety devices that can fail and must not be
relied upon to stop movement of the hoist? - answer- true

There is no difference in capacity between category 2 and category 3 cranes - answer-
false

Which of the following is an acceptable crane operating practice? - answer- routinely
lifting submerged parts out of dip tank

Pre-use inspections on rigging gear are performed for all of the following reasons
except? - answer- so documentation can be completed

What type of rigging gear inspections require documentation - answer- periodically

Distorted or twisted rigging hardware must be - answer- removed from service

When a sling is used in a choker configuration, its capacity is - answer- decreased

What should be used when attaching rigging gear to padeyes and lifting lugs - answer-
shackles

Removal of cracks from rigging hardware must be verified by ____ before it is returning
to service? - answer- non-destructive testing

A crane with capacity of 100,000 lbs is performing a lift of 90,000 lbs is an? - answer-
complex lift

The benefits of buying summaries with Stuvia:

Guaranteed quality through customer reviews

Guaranteed quality through customer reviews

Stuvia customers have reviewed more than 700,000 summaries. This how you know that you are buying the best documents.

Quick and easy check-out

Quick and easy check-out

You can quickly pay through credit card or Stuvia-credit for the summaries. There is no membership needed.

Focus on what matters

Focus on what matters

Your fellow students write the study notes themselves, which is why the documents are always reliable and up-to-date. This ensures you quickly get to the core!

Frequently asked questions

What do I get when I buy this document?

You get a PDF, available immediately after your purchase. The purchased document is accessible anytime, anywhere and indefinitely through your profile.

Satisfaction guarantee: how does it work?

Our satisfaction guarantee ensures that you always find a study document that suits you well. You fill out a form, and our customer service team takes care of the rest.

Who am I buying these notes from?

Stuvia is a marketplace, so you are not buying this document from us, but from seller GEEKA. Stuvia facilitates payment to the seller.

Will I be stuck with a subscription?

No, you only buy these notes for $10.99. You're not tied to anything after your purchase.

Can Stuvia be trusted?

4.6 stars on Google & Trustpilot (+1000 reviews)

79373 documents were sold in the last 30 days

Founded in 2010, the go-to place to buy study notes for 14 years now

Start selling
$10.99
  • (0)
  Add to cart