100% satisfaction guarantee Immediately available after payment Both online and in PDF No strings attached
logo-home
ELEVATOR MECHANIC EXAM 2024/2025 WITH GUARANTEED ACCURATE ANSWERS |VERIFIED $16.49   Add to cart

Exam (elaborations)

ELEVATOR MECHANIC EXAM 2024/2025 WITH GUARANTEED ACCURATE ANSWERS |VERIFIED

 3 views  0 purchase
  • Course
  • ELEVATOR MECHANIC
  • Institution
  • ELEVATOR MECHANIC

ELEVATOR MECHANIC EXAM 2024/2025 ELEVATOR MECHANIC EXAM 2024/2025 WITH GUARANTEED ACCURATE ANSWERS |VERIFIED A contractor wants to raise the car speed from 100fpm to 125fpm, it currently has a 12" sheave. What sheave is required? - ACCURATE ANSWERDiam=12" 12/4=3" 25fpm=3" 100fpm + 25fpm= 12"...

[Show more]

Preview 3 out of 29  pages

  • August 9, 2024
  • 29
  • 2024/2025
  • Exam (elaborations)
  • Questions & answers
  • ELEVATOR MECHANIC
  • ELEVATOR MECHANIC
avatar-seller
GRADEUNITS
ELEVATOR MECHANIC EXAM 2024/2025
ELEVATOR MECHANIC EXAM 2024/2025 WITH GUARANTEED ACCURATE
ANSWERS |VERIFIED




A contractor wants to raise the car speed from 100fpm to 125fpm, it currently has a
12" sheave. What sheave is required? - ACCURATE ANSWER✅✅Diam=12"
12/4=3" 25fpm=3" 100fpm + 25fpm= 12"+3"= 15" sheave


A MOV (Metal Oxide Varistor) burns out. You replace it, but cannot read voltage
or resistance. What should you do? - ACCURATE ANSWER✅✅Replace it with
a larger MOV


On a Ward-Leonard circuit the break is set, but the motor is trying to slip through
the break. What is the issue? - ACCURATE ANSWER✅✅Suicide Circuit


You have an old DC motor and are adding an SCR drive, what do you do to the
interpoles? - ACCURATE ANSWER✅✅Leave the interpoles alone. When
adding a SCR drive to the generator, the series loop is removed, as are the 3
resistors. Everything else remains the same

,A hydro runs up with no load, but will not run with a full load. What is the issue? -
ACCURATE ANSWER✅✅The relief valve is set too low


Runby for a 1:1 hits the CWT buffer 4" below the top landing. CWT runby should
be set at 18". How much should the ropes be shortened? - ACCURATE
ANSWER✅✅22"


You need to work on a freight door retiring cam, you LOTO the main line but there
is still power on the cam. What circuit is still hot? - ACCURATE
ANSWER✅✅Door Operator Disconnect/ Main Line Disconnect


The contractor requests that the vertical center of a Rack and Pinion hoist be
moved. How do you do this? - ACCURATE ANSWER✅✅Adjust Tie Downs
and Wall Ties


Working pressure on a Hydro is 400psi. What is the maximum relief valve setting?
- ACCURATE ANSWER✅✅400psi x 150%= 600psi


What must be installed on a false car before operation? - ACCURATE
ANSWER✅✅Spring Loaded Safeties.


There is slight arcing between the brush and commutator. What action must be
taken? - ACCURATE ANSWER✅✅None.
Heavy arcing=Light brush pressure. Heavy bush pressure=mechanical wear


If rigging gear is roped 3:1 and a BEAM CLAMP is used to lift a 6,000lb load.
What is the beam capacity? - ACCURATE ANSWER✅✅18,000lbs. Beam

, capacity is cut in half with use of clamp, when rigging all blocks, rope, and clamps
will be Equal to the lowest load rating


How much resistance is measured over a normally closed switch? - ACCURATE
ANSWER✅✅1.2ohms. should be zero, but will never be that low


A car traveling in the hoistway always stops at the same spot and blows a fuse.
What causes this? - ACCURATE ANSWER✅✅Traveling cable has a
cut/exposed wire or a short


How is a class 1 yearly buffer test preformed? - ACCURATE ANSWER✅✅Car
at bottom landing and on inspection, jump out direction and final limits. With pit
clear, run down to compress buffers, buffers should fully extend within 90 seconds.
5yr: Full load Full speed
CWT: Full speed Empty


How many strain supports are required on a 350ft raceway? - ACCURATE
ANSWER✅✅4. 1 every 100ft


How is stainless steel drilled out? - ACCURATE ANSWER✅✅Slow speed and
constant pressure


What is the required amount of retainer clips for wedge shackles and what is the
spacing? - ACCURATE ANSWER✅✅Minimum 2 clips. 1st at a maximum 4x
the diameter of the rope
2nd at a maximum 8x the diameter above the 1st clip

The benefits of buying summaries with Stuvia:

Guaranteed quality through customer reviews

Guaranteed quality through customer reviews

Stuvia customers have reviewed more than 700,000 summaries. This how you know that you are buying the best documents.

Quick and easy check-out

Quick and easy check-out

You can quickly pay through credit card or Stuvia-credit for the summaries. There is no membership needed.

Focus on what matters

Focus on what matters

Your fellow students write the study notes themselves, which is why the documents are always reliable and up-to-date. This ensures you quickly get to the core!

Frequently asked questions

What do I get when I buy this document?

You get a PDF, available immediately after your purchase. The purchased document is accessible anytime, anywhere and indefinitely through your profile.

Satisfaction guarantee: how does it work?

Our satisfaction guarantee ensures that you always find a study document that suits you well. You fill out a form, and our customer service team takes care of the rest.

Who am I buying these notes from?

Stuvia is a marketplace, so you are not buying this document from us, but from seller GRADEUNITS. Stuvia facilitates payment to the seller.

Will I be stuck with a subscription?

No, you only buy these notes for $16.49. You're not tied to anything after your purchase.

Can Stuvia be trusted?

4.6 stars on Google & Trustpilot (+1000 reviews)

77529 documents were sold in the last 30 days

Founded in 2010, the go-to place to buy study notes for 14 years now

Start selling
$16.49
  • (0)
  Add to cart